 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Micro-D PCB - .050" Contact Spacing MDM-PCB MDM-PCB connectors are designed for use with flex circuitry, flat cable and printed circuit boards or multi-layer boards. They use the standard MDM metal shell and provide high density and high reliability in board-to-board, board-to-cable and cable-to-cable applications. MDM-PCB connectors are available in 8 shell sizes with 9 to 100 contacts. Terminations may be straight (BS) or at 90 right angle (BR, CBR) board thickness. Jackpost mounting for use with locking hardware is also available. How to Order - MDM-PCB Series R RoHS COMPLIANCE SERIES INSULATOR MATERIAL CONTACT ARRANGEMENT CONTACT TYPE TERMINATION TYPE MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE SHELL FINISH MODIFICATION CODES SERIES MDM - Micro "D" Metal Shell INSULATOR MATERIAL Liquid Crystal Polymer (LCP) CONTACT ARRANGEMENT 9, 15, 21, 25, 31, 37, 51, and 100 TERMINATION TYPE BS - Straight PCB Termination BR - Right Angle PCB Termination CBR - Right Angle Narrow Profile PCB Terminations MOUNTING HARDWARE (Shell Flange) P - Jackposts M7 - Jackposts M83513/5-07 (Sizes 9-51) M17 - Jackposts M83513/5-17 (Size 100) No letter - none MOUNTING HARDWARE FOR PCB T - Threaded Insert #2-56 Thd for Shell Sizes 9 thru 51 #4-40 Thd for Shell Size 100 No letter - none TERMINATION TAIL LENGTH MODIFICATION CODE None - .109 (2.77) .015 (0.38) Standard L61 - .125 (3.18) L56 - .150 (3.81) L57 - .190 (4.83) L39 - .250 (6.35) L58 - .375 (9.52) SHELL FINISH MODIFICATION CODES None - Yellow Chromate/Cadmium over Nickel A174 - Electroless Nickel A172 - Gold over Nickel A141 - Irridite/Alodine A30 - Black Anodize (For special modification codes, consult customer service.) MDM * - 25 P BS P-T L39 A174 CONTACT TYPE P - Pin (Plug) S - Socket (Receptacle) NOTE: Back molding material - Epoxy Hysol #MG40FS Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 18 Micro-D PCB - .050" Contact Spacing BS (Board Straight) Series A B C .186 (4.72) MAX. PLUG .198 (5.03) MAX. RECEPTACLE G D E MDM-PCB F .096 .005 (2.44 0.13) DIA. Size 9-51) .120 .005 (3.05 0.13) Size 100 CAV. #1 J LAST CAV. H JACKPOST (9-51) #2-56 UNC-2B TYP. JACKPOST (100) #4-40 UNC-2B TYP. .109 0.15 (2.77 0.38) LAST CAV. K * CAV. #1 .100 (2.54) REF. PCB Termination Arrangements* (Viewed from PCB solder side) Identification number shown for plug connector, use reverse order for socket connector. .050 (1.27) 6 7 8 9 NOTE: Dimensions shown are for reference only-consult factory for final design dimensions. .050 (1.27) 12 13 14 15 16 17 18 19 20 21 14 15 16 17 18 19 20 21 22 23 24 25 .050 (1.27) 5 1 9 10 11 12 13 14 15 .050 (1.27) 1 2 3 4 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 10 11 .375 (9.53) .225 (5.72) TYP. .225 (5.72) .150 (3.81) 1 2 3 4 5 6 7 8 9 10 11 12 13 9 Contacts 15 Contacts .050 (1.27) 21 Contacts .050 (1.27) .100 (2.54) TYP. 25 Contacts 36 19 1 2 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 35 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 .150 (3.81) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 .150 (3.81) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .150 (3.81) 31 Contacts 37 Contacts 51 Contacts 76 52 27 1 2 77 53 28 3 78 54 29 4 79 55 30 5 80 56 81 57 82 58 33 7 8 83 59 34 9 84 60 85 61 36 10 11 86 62 37 12 87 63 38 13 88 64 39 14 89 65 40 15 90 66 41 16 91 67 42 17 92 68 43 18 93 69 44 19 94 70 95 71 46 20 21 96 72 47 22 97 73 48 23 98 74 49 24 99 75 50 25 100 31 6 32 35 45 51 26 .150 (3.81) .150 (3.81) 100 Contacts NOTE: Standard lead termination is #24 AWG, solid copper, solder or tin dipped All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27) Part Number By Shell Size MDM-9PBS* MDM-9SBS* MDM-15PBS* MDM-15SBS* MDM-21PBS* MDM-21SBS* MDM-25PBS MDM-25SBS* MDM-31PBS* MDM-31SBS* MDM-37PBS* MDM-37SBS* MDM-51PBS* MDM-51SBS* MDM-100PBS* A Max. 1.390 (35.31) 1.390 (35.31) 1.390 (35.31) 1.390 (35.31) 1.690 (43.93) 1.690 (43.93) 1.740 (44.20) 1.740 (44.20) 2.040 (51.82) 2.040 (51.82) 2.340 (59.44) 2.340 (59.44) 2.270 (67.66) 2.270 (67.66) 3.070 (77.98) B .007 (.18) 1.150 (29.21) 1.150 (29.21) 1.150 (29.21) 1.150 (29.21) 1.450 (36.83) 1.450 (36.83) 1.500 (38.10) 1.500 (38.10) 1.800 (45.72) 1.800 (45.72) 2.100 (53.34) 2.100 (53.34) 2.000 (50.80) 2.000 (50.80) 2.800 (71.12) C .005 (.13) .565 (14.35) .565 (14.35) .715 (18.16) .715 (18.16) .865 (21.97) .865 (21.97) .965 (24.51) .965 (24.51) 1.115 (28.32) 1.115 (28.32) 1.265 (32.13) 1.265 (32.13) 1.215 (30.86) 1.215 (30.86) 1.800 (45.72) D Max. .785 (19.94) .785 (19.94) .935 (23.75) .935 (23.75) 1.085 (27.56) 1.085 (27.56) 1.185 (30.10) 1.185 (30.10) 1.335 (33.91) 1.335 (33.91) 1.485 (37.72) 1.485 (37.72) 1.435 (36.45) 1.435 (36.45) 2.175 (55.24) 2.175 (55.24) E Max. .334 (8.48) .402 (10.21) .484 (12.29) .552 (13.97) .634 (16.10) .702 (17.83) .734 (18.64) .802 (20.37) .884 (22.45) .952 (24.18) 1.034 (26.26) 1.102 (27.99) .984 (24.99) 1.052 (26.72) 1.384 (35.15) 1.508 (38.30) F Max. .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .228 (5.79) .296 (7.52) .271 (6.88) .394 (10.01) G Max. .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .351 (8.92) .351 (8.92) .460 (11.68) .460 (11.68) H Max. .165 (4.19) .165 (4.19) .165 (4.19) .165 (4.19) .165 (4.19) .165 (4.19) .165 (4.19) .165 (4.19) .165 (4.19) .165 (4.19) .165 (4.19) .165 (4.19) .165 (4.19) .165 (4.19) J Max. .355 (9.02) .355 (9.02) .355 (9.02) .355 (9.02) .355 (9.02) .355 (9.02) .355 (9.02) .355 (9.02) .355 (9.02) .355 (9.02) .355 (9.02) .355 (9.02) .355 (9.02) .355 (9.02) K Max. .555 (14.10) .555 (14.10) .555 (14.10) .555 (14.10) .555 (14.10) .555 (14.10) .555 (14.10) .555 (14.10) .555 (14.10) .555 (14.10) .555 (14.10) .555 (14.10) .555 (14.10) .555 (14.10) .686 (17.42) .686 (17.75) .303 (7.70) .550 (12.70) .303 (7.70) .550 (12.70) 3.070 (77.98) 2.800 (71.12) 1.800 (45.72) MDM-100SBS* *For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 19 Micro-D PCB - .050" Contact Spacing BR (Board Right Angle) Series A C .109 .015 (2.77 0.38) E G .186 (4.72) MAX. PLUG .198 (5.05) MAX. .100 (2.54) TYP. MDM-PCB JACKPOST #2-56 UNC-2B TYP. B D .125 .015 (3.18 0.38) F CAV. #1 LAST CAV. .050 (1.27) TYP. .100 TYP. .096 .005 (2.44 0.31) .150 .010 (3.8 0.25) PCB Termination Arrangements (Viewed from bottom of connector, PCB solder side.) Identification number shown for plug connector, use reverse order for socket connector. .150 (3.81) .150 (3.81) 9 10 11 12 13 14 15 .150 (3.81) .150 (3.81) 6 7 8 9 12 13 14 15 16 17 18 19 20 21 14 15 16 17 18 19 20 21 22 23 24 25 1 .375 (9.53) 2 3 4 5 1 2 3 4 5 6 7 8 .300 (7.62) 1 2 3 4 5 6 7 8 9 10 11 1 2 3 4 5 6 7 8 9 10 11 12 13 .225 (5.72) .175 (4.45) 9 Contacts .150 (3.81) 15 Contacts 21 Contacts .150 (3.81) 25 Contacts .050 (1.27) 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 36 19 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 34 35 20 21 22 23 24 25 26 27 28 29 30 31 32 33 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 1 11 12 13 14 15 16 17 18 .150 (3.81) .150 (3.81) .150 (3.81) 31 Contacts 37 Contacts 51 Contacts .050 (1.27) 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 27 28 29 30 31 32 33 1 2 3 4 5 6 7 8 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 .150 (3.81) 100 Contacts NOTE: Standard lead termination is #24 AWG, gold plated, solid copper, solder or tin dripped. All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27). Part Number By Shell Size MDM-9PBR* MDM-9SBR* MDM-15PBR* MDM-15SBR* MDM-21PBR* MDM-21SBR* MDM-25PBR* MDM-25SBR* MDM-31PBR* MDM-31SBR* MDM-37PBR* MDM-37SBR* MDM-51PBR* MDM-51SBR* MDM-100PBR* MDM-100SBR* A Max. 1.390 (35.31) 1.390 (35.31) 1.540 (39.12) 1.540 (39.12) 1.690 (42.93) 1.690 (42.93) 1.790 (45.47) 1.790 (45.47) 2.040 (51.82) 2.040 (51.52) 2.340 (59.44) 2.340 (59.44) 1.875 (47.63) 1.875 (47.63) 2.74 (69.72) 2.74 (69.72) B .007 (.18) 1.150 (29.21) 1.150 (29.21) 1.300 (33.02) 1.300 (33.02) 1.450 (36.83) 1.450 (36.83) 1.550 (39.37) 1.550 (39.37) 1.800 (45.72) 1.800 (45.72) 2.100 (53.34) 2.100 (53.34) 1.600 (40.64) 1.600 (40.64) 2.500 (63.50) 2.500 (63.50) C .005 (.13) .565 (14.35) .565 (14.35) .715 (18.16) .715 (18.16) .865 (21.97) .865 (21.97) .965 (24.51) .965 (24.51) 1.115 (28.32) 1.115 (28.32) 1.265 (32.13) 1.265 (32.13) 1.215 (30.86) 1.215 (30.86) 1.800 (45.72) 1.800 (45.72) D Max. .334 (8.48) .402 (10.21) .484 (12.29) .552 (13.97) .634 (16.10) .702 (17.83) .734 (18.64) .802 (20.37) .884 (22.45) .952 (24.18) 1.034 (26.26) 1.102 (27.99) .984 (24.99) 1.052 (26.72) 1.384 (35.15) 1.508 (38.10) E Max. .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .228 (5.79) .296 (7.52) .271 (6.88) .394 (10.01) F Max. .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .455 (11.56) .565 (14.35) .565 (14.35) .755 (19.18) .755 (19.18) G Max. .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .351 (8.92) .351 (8.92) .394 (10.01) .394 (10.01) *For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 20 Micro-D PCB - .050" Contact Spacing CBR (Condensed Board Right Angle) Series LAST CAV. .109 .015 (2.77 0.38) A C + + MDM-PCB JACKPOST 2-56 UNC-2B TYP. (Size 9-51) D CAV. #1 E .186 (4.72) MAX.PLUG .198 (5.03) MAX. RECEPT. G F H .185 (4.70)MAX. JACKPOST #4-40 UNC 2B TYP. B C F G H H G SEE VIEW X .096 .005 (2.44 0.31) DIA.TYP. (Size 9-51) SEE VIEW Y * * FOR 31: 1.085(27.56) MAX. FOR 37: 1.185(30.10) MAX. FOR 51: 1.225(31.12) MAX. ** .125 .005 (3.18 0.31) DIA. TYP. 1.815 (46.10) MAX. SEE VIEW W F 100 VIEW PCB Termination Arrangements (Viewed from bottom of connector, PCB solder side.) Identification number shown for plug connector, use reverse order for socket connector. .083 (2.11) 5 4 2 1 .108 (2.73) 7 5 6 14 .100 (2.54) TYP. 4 12 13 11 3 10 2 1 9 8 15 .020 (0.51) 6 .020 (0.51) .083 (2.11) 10 11 21 20 9 19 8 7 18 6 17 16 5 4 3 14 15 13 2 1 12 .083 (2.11) 12 11 24 25 10 22 23 9 21 20 8 7 19 6 5 4 17 18 3 15 16 2 1 14 .020 (0.51) 13 9 8 3 7 9 Contacts View X 15 Contacts View X .050 (1.27) TYP. .020 (0.51) 21 Contacts View X .325 (8.26) 25 Contacts View X .275 (6.98) .158 (4.00) 15 16 30 14 29 31 28 13 12 27 11 10 25 26 9 24 23 22 8 7 21 20 6 5 19 18 4 3 17 2 1 19 18 37 17 16 35 34 15 .183 (4.65) 13 14 33 32 12 31 30 11 10 29 9 8 28 27 7 6 26 25 5 4 24 23 3 2 22 21 1 17 18 15 16 13 14 11 12 10 27 9 43 45 44 42 8 7 41 26 40 6 5 25 4 3 23 24 38 22 2 1 21 19 20 36 26 25 24 51 50 75 23 22 49 48 21 19 20 47 18 45 46 44 71 72 96 95 70 17 16 43 42 15 14 41 40 65 13 12 39 38 63 64 88 11 10 9 8 7 6 33 32 5 4 31 3 2 1 20 35 34 33 32 31 30 29 46 28 47 .020 (0.51) .020 (0.51) 36 51 50 49 48 39 37 .050 (1.27) .108 (2.73) 37 35 36 34 61 59 60 84 85 29 27 28 30 73 74 69 67 68 94 92 93 57 58 82 55 56 80 81 53 54 78 79 52 76 77 66 90 91 62 86 87 100 99 98 97 .100 .005 (2.54 0.13) 89 83 31 Contacts View Y 37 Contacts View Y 51 Contacts View Y 100 Contacts View W All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27). Part Number By Shell Size MDM-9PCBR* MDM-9SCBR* MDM-15PCBR* MDM-15SCBR* MDM-21PCBR* MDM-21SCBR* MDM-25PCBR* MDM-25SCBR* MDM-31PCBR* MDM-31SCBR* MDM-37PCBR* MDM-37SCBR* MDM-51PCBR* MDM-51SCBR* MDM-100PCBR* MDM-100SCBR* A Max. .785 (19.94) .785 (19.94) .935 (23.75) .935 (23.75) 1.085 (27.56) 1.085 (27.56) 1.185 (30.10) 1.185 (30.10) 1.335 (33.91) 1.335 (33.91) 1.485 (37.72) 1.485 (37.72) 1.435 (36.45) 1.435 (36.45) 2.170 (55.12) 2.170 (55.12) B .005 (.13) .565 (14.35) .565 (14.35) .715 (18.16) .715 (18.16) .865 (21.97) .865 (21.97) .965 (24.51) .965 (24.51) 1.115 (28.32) 1.115 (28.32) 1.265 (32.13) 1.265 (32.13) 1.215 (30.86) 1.215 (30.86) 1.800 (45.72) 1.800 (45.72) C Max. .334 (8.48) .402 (10.21) .484 (12.29) .552 (13.97) .634 (16.10) .702 (17.83) .734 (18.64) .802 (20.37) .884 (22.45) .952 (24.18) 1.034 (26.26) 1.102 (27.99) .984 (24.99) 1.052 (26.72) 1.384 (35.15) 1.508 (38.10) D Max. .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .308 (7.82) .351 (8.92) .351 (8.92) .394 (10.01) .394 (10.01) NOTE: Standard lead termination is #24 AWG, solid copper, solder or tin dripped. E Max. .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .184 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .185 (4.70) .253 (6.43) .228 (5.79) .296 (7.52) .271 (6.88) .394 (10.01) F Max. .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .520 (13.21) .520 (13.21) .520 (13.21) .520 (13.21) .650 (16.15) .650 (16.15) 1.000 (25.40) 1.000 (25.40) G .010 (.25) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .300 (7.62) .300 (7.62) .400 (10.16) .400 (10.16) H .010 (.25) .230 (5.81) .230 (5.81) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .150 (3.81) .150 (3.81) .200 (5.08) .200 (5.08) *For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 21 |
Price & Availability of MDM-PCB
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |