 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| LCA712 Single Pole OptoMOS(R) Relays Load Voltage Load Current Max RON LCA712 60 1 0.5 Units V A Features * Small 6 Pin DIP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 3750VRMS Input/Output Isolation * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Surface Mount and Tape & Reel Versions Available Description The LCA712 is a 1-Form-A solid state relay which uses optically coupled MOSFET technology to provide 3750V of input to output isolation. The efficient MOSFET switches and photovoltaic die use Clare's patented OptoMOS architecture. The optically-coupled input is controlled by a highly efficent GaAIAs infrared LED. The LCA712 can be used to replace mechanical relays and offers the superior reliability associated with semiconductor devices. Because they have no moving parts, they can offer faster, bounce-free switching in a more compact surface mount or through hole package. Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hookswitch * Dial Pulsing * Ground Start * Ringer Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Approvals * UL Recognized: File Number E76270 * CSA Certified: File Number LR 43639-10 * Certified to: * EN 60950 * EN 41003 Ordering Information Part # LCA712 LCA712S LCA712STR Description 6 Pin DIP (50/Tube) 6 Pin Surface Mount (50/Tube) 6 Pin Surface Mount (1000/Reel) Pin Configuration LCA712 Pinout AC/DC Configuration 1 2 3 6 5 4 LCA712 Pinout DC Only Configuration 1 2 3 6 5 4 + Control - Control Do Not Use Load Do Not Use Load + Control - Control Do Not Use + Load - Load Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL LOAD 10%+ +90% 10%+ TON TOFF DS-LCA712-R1.0 www.clare.com 1 LCA712 Absolute Maximum Ratings (@ 25 C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Blocking Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.) 1 2 Min 3750 -40 -40 - Typ Max Units - 1501 mW 50 mA 1 A 5 V 60 V - 8002 mW VRMS +85 C +125 C +260 +220 C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Derate Linearly 1.33 mw/C Derate Linearly 6.67 mw/C Electrical Characteristics Parameter Conditions Output Characteristics @ 25C Load Current (Continuous) AC/DC Configuration DC Configuration Peak Load Current 10ms On-Resistance AC/DC Configuration IL=1A DC Configuration IL=1.8A Off-State Leakage Current VL=60V, T=85C Switching Speeds Turn-On IF=10mA, VL=10V Turn-Off IF=10mA, VL=10V Output Capacitance 50V; f=1MHz Capacitance Input to Output Input Characteristics @ 25C Input Control Current IL=1A Input Dropout Current Input Voltage Drop IF=10mA Reverse Input Voltage Reverse Input Current VR=5V Common Characteristics @ 25C Input to Output Capacitance Symbol Min Typ Max Units IL IL ILPK RON RON ILEAK TON TOFF IF IF VF VR IR CI/O 10 0.4 0.9 - 0.3 0.1 220 3 0.7 1.2 3 1.0 1.8 5.0 0.5 0.15 10 2.5 0.35 50 1.4 5 10 - A A A nA ms ms pF pF mA mA V V A pF 2 www.clare.com Rev 1.0 LCA712 PERFORMANCE DATA* 35 30 Device Count (N) LCA712 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25C) IF = 10mADC LCA712 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25C) (Load Current = 1ADC; IF = 10mADC) 35 30 Device Count (N) Device Count (N) 25 20 15 10 5 0 LCA712 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25C) 35 30 25 20 15 10 5 0 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 LED Forward Voltage (V) 0.215 0.225 0.235 0.245 0.255 0.265 72 74 76 78 80 82 On-Resistance () Blocking Voltage (V) LCA712 Typical IF for Switch Operation (N=50 Ambient Temperature = 25C) (Load Current = 1ADC) 25 20 15 10 5 0 1.25 1.75 2.25 2.75 3.25 3.75 LED Current (mA) 25 20 15 10 5 0 LCA712 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25C) (Load Current = 1ADC) 25 20 15 10 5 0 1.25 1.75 2.25 2.75 3.25 3.75 LCA712 Typical Turn-On Time (N=50 Ambient Temperature = 25C) (Load Current = 1ADC; IF = 10mADC) Device Count (N) Device Count (N) Device Count (N) 0.5 0.7 0.9 1.1 1.3 1.5 LED Current (mA) Turn-On (ms) 25 20 15 10 5 0 LCA712 Typical Turn-Off Time (N=50 Ambient Temperature = 25C) (Load Current = 1ADC; IF = 10mADC) LCA712 Typical Maximum Load Current vs. Temperature 1800 1600 Load Current (mA) Leakage (A) 1400 1200 1000 800 600 400 LCA712 Typical Leakage vs. Temperature (Measured across Pins 4 & 6 @ VL = max) 0.007 0.006 0.005 0.004 0.003 0.002 0.001 0 -40 -20 0 20 40 60 80 100 Temperature (C) Device Count (N) IF = 20mA IF = 10mA IF = 5mA -40 -20 0 20 40 60 80 100 120 0.03 0.05 0.07 0.09 0.11 0.13 Turn-Off (ms) Temperature (C) LCA712 Typical Blocking Voltage vs. Temperature 81.0 Blocking Voltage (VRMS) 80.0 Turn-On (ms) 79.0 78.0 77.0 76.0 75.0 74.0 73.0 -40 -20 0 20 40 60 80 100 Temperature (C) 1.400 1.200 LCA712 Typical Turn-On vs. Temperature (Load Current = 1ADC) 0.140 0.120 Turn-Off (ms) LCA712 Typical Turn-Off vs. Temperature (Load Current = 1ADC, IF = 10mA) 1.000 0.800 0.600 0.400 0.200 0 -40 -20 0 20 40 60 IF = 10mA IF = 20mA 0.100 0.080 0.060 0.040 0.020 0 80 100 -40 -20 0 20 40 60 80 100 Temperature (C) Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev 1.0 www.clare.com 3 LCA712 PERFORMANCE DATA* LCA712 Typical LED Forward Voltage Drop vs. Temperature LED Forward Voltage Drop (V) 1.8 1.6 Turn-On (ms) 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 120 Temperature (C) LCA712 Typical Turn-On vs.LED Forward Current (Load Current = 1ADC) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 Forward Current (mA) LCA712 Typical Turn-Off vs. LED Forward Current (Load Current = 1ADC) 0.090 0.080 0.070 Turn-Off (ms) 0.060 0.050 0.040 0.030 0.020 0.010 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) 50mA 30mA 20mA 10mA 0.450 0.400 On-Resistance () 0.350 0.300 0.250 0.200 0.150 0.100 0.050 LCA712 Typical On-Resistance vs. Temperature (Load Current = 1ADC; IF = 10mADC) 5.000 4.500 4.000 3.500 3.000 2.500 2.000 1.500 1.000 0.500 0 -40 LCA712 Typical IF for Switch Operation vs. Temperature (Load Current = 1ADC) LED Current (mA) LCA712 Typical IF for Switch Dropoff vs. Temperature (Load Current = 1ADC) 5.000 4.500 4.000 3.500 3.000 2.500 2.000 1.500 1.000 0.500 0 -40 -20 0 20 40 60 80 100 Temperature (C) 0 -40 -20 0 20 40 60 80 100 Temperature (C) LED Current (mA) -20 0 20 40 60 80 100 Temperature (C) 1000 800 600 400 200 0 -200 -400 -600 -800 -1000 -0.3 LCA712 Typical Load Current vs. Load Voltage (Ambient Temperature = 25C) IF = 10mADC LCA712 Energy Rating Curve 8 7 Load Current (A) 6 5 4 3 2 1 Load Current (mA) -0.2 -0.1 0 0.1 0.2 0.3 0 10s 100s 1ms 10ms 100ms Time 1s 10s 100s Load Voltage (V) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev 1.0 LCA712 MECHANICAL DIMENSIONS 6Pin DIP Through Hole (Standard) PC Board Pattern (Top View) 6-.800 DIA. (6-.031 DIA.) 6.350 .127 (.250 .005) 2.540 .127 (.100 .005) 7.620 .127 (.300 .005) 5.080 .127 (.200 .005) 6Pin DIP Surface Mount ("S" Suffix) PC Board Pattern (Top View) 2.540 .127 (.100 .005) 8.305 .127 (.327 .005) 1.905 .127 (.075 .005) 1.499 .127 (.059 .005) Dimensions mm (inches) Rev 1.0 www.clare.com 5 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-LCA712-R1.0 (c)Copyright 2002, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 11/6/02 |
Price & Availability of LCA712
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |