View MKT370_558488.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

BCcomponents
DATA SHEET
MKT 370/371/372/373 Metallized polyester film capacitors
Product specification Supersedes data of April 1999 File under BCcomponents, BC05 2001 Jun 22
BCcomponents
Product specification
Metallized polyester film capacitors MKT 370/371/372/373
MKT RADIAL POTTED TYPE PITCH 5/7.5/10/15/22.5/27.5 mm
296x12(full_width)
2222 370 P = 5 mm
2222 371 P = 7.5 mm
2222 372 P = 10 mm
2222 373 P = 15/22.5/27.5 mm
CBA111
Fig.1 Simplified outlines.
FEATURES
QUICK REFERENCE DATA DESCRIPTION Capacitance range (E12 series) Capacitance tolerance Rated (DC) voltage Rated (AC) voltage Climatic category Rated temperature Maximum application temperature Reference specification Performance grade Materials 0.001 to 15 F VALUE
* Low-inductive wound cell of metallized (PETP) film * Potted with epoxy resin in a flame-retardant case * Radial leads of solder-coated wire * Withstands solvents and rinsing liquids * Small stand-off pips to allow removal of solder flux * Suitable for high density packaging.
APPLICATIONS
10%; 5%
63 V; 100 V; 250 V; 400 V; 630 V 40 V; 63 V; 160 V; 220 V; 250 V 55/105/56 85 C 105 C IEC 60384-2 grade 1 (long life) qualified in accordance with UL94 V-0
* Blocking and coupling * Bypass and energy reservoir.
DETAIL SPECIFICATION For more detailed data and test requirements see "Type detail specification HQN-384-02/103".
2001 Jun 22
2
BCcomponents
Product specification
Metallized polyester film capacitors
COMPOSITION OF CATALOGUE NUMBER TYPE AND PITCHES 370 5.08 mm
MKT 370
MULTIPLIER (nF) 0.1 1 CAPACITANCE (numerically) 10 100 2 3 4 5
Example: 104 = 10 x 10 = 100 nF
2222
370
XX
XX X
TYPE 370
PACKAGING ammopack
LEAD CONFIGURATION
PREFERRED TYPES C-TOL 63 V 75 76 11 12 15 16 18 19 100 V 85 86 ON REQUEST 21 22 25 26 28 29 250 V 35 36 41 42 45 46 48 49 400 V 65 66 51 52 55 56 58 59
10% 5% 10% 5% 10% 5% 10% 5%
lead length 4.0 mm loose in box 370 taped on reel lead length 26.0 mm
2001 Jun 22
3
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 371/372/373
TYPE AND PITCHES 371 372 373 7.5 mm 10.0 mm 15.0 mm 22.5 mm 27.5 mm CAPACITANCE (numerically)
MULTIPLIER (nF) 0.1 1 10 100 Example: 104 = 10 x 10 = 100 nF 2 3 4 5
2222
37.
XX
XX X
TYPE
PACKAGING loose in box
LEAD CONFIGURATION lead length 4.0 mm
PREFERRED TYPES C-TOL 63 V 11 12 38 39 100 V 21 22 68 69 21 23 25 26 65 66 22 25 26 28 29 24 27 28 250 V 41 42 78 79 41 43 45 46 75 76 42 45 46 48 49 44 47 48 400 V 51 52 88 89 51 53 55 56 85 86 52 55 56 58 59 54 57 58 630 V
10% 5% 10% 5%
- - - -
61 63
371 ammopack 372 373 loose in box loose in box lead length 4.0 mm lead length 5.0 mm
10% 10% 10% 5% 10% 5%
- -
15 16 35 36
ON REQUEST loose in box 371 taped on reel loose in box 372 taped on reel ammopack loose in box 373 taped on reel lead length 5.0 mm lead length 4.0 mm lead length 26.0 mm
- - - -
62 65 66 68 69 64 67 68
5% 10% 5% 10% 5% 5% 10% 5%
- - - - - - - -
2001 Jun 22
4
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 370 GENERAL DATA
MKT 370
PITCH 5 mm
296x12(full_width)
l
b
h
lt
P
Odt
CBA112
Fig.4 Outline. Specific reference data for the 63 V DC capacitors DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.47 F 0.47 F < C 1.5 F Rated voltage pulse slope (dU/dt)R at 63 V (DC) R between leads, for C 0.33 F at 10 V; 1 minute RC between leads, for: 0.33 F < C 1.0 F at 10 V; 1 minute C > 1.0 F at 10 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 63 V DC versions PACKAGING Ammopack DIMENSIONS H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/-0.5 mm Loose in box lt = 26.0 2.0 mm Taped on reel H = 18.5 mm; P0 = 12.7 mm 5 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 370 75... 2222 370 76... 2222 370 11... 2222 370 12... 2222 370 15... 2222 370 16... 2222 370 18... 2222 370 19... ORDERING preferred preferred on request on request on request on request on request on request at 1 kHz 75 x 10-4 75 x 10-4 75 x 10-4 VALUE at 10 kHz 130 x 10-4 130 x 10-4 130 x 10-4 60 V/s >15000 M at 100 kHz 250 x 10-4 300 x 10-4 -
>5000 s >1000 s >30000 M 100 V; 1 minute 200 V; 1 minute
10% 5% 10% 5% 10% 5% 10% 5%
2001 Jun 22
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 63 V; URac = 40 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) AMMOPACK MASS (g) H = 18.5 mm; P0 = 12.7 mm C-tol = 10% catalogue number Pitch = 5.08 0.30 mm; dt = 0.50 0.05 mm 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1 1.2(1) 1.5(1) Note 1. For C = 1.2 F and C = 1.5 F: URdc = 50 V and URac = 32 V. 6.0 x 11.0 x 7.2 0.60 4.5 x 9.0 x 7.2 0.45 3.5 x 8.0 x 7.2 0.35 2.5 x 6.5 x 7.2 0.25 2222 370 75563 2222 370 75683 2222 370 75823 2222 370 75104 2222 370 75124 2222 370 75154 2222 370 75184 2222 370 75224 2222 370 75274 2222 370 75334 2222 370 75394 2222 370 75474 2222 370 75564 2222 370 75684 2222 370 75824 2222 370 75105 2222 370 75125 2222 370 75155
MKT 370
C-tol = 5% last 5 digits
.. 76563 .. 76683 .. 76823 .. 76104 .. 76124 .. 76154 .. 76184 .. 76224 .. 76274 .. 76334 .. 76394 .. 76474 .. 76564 .. 76684 .. 76824 .. 76105 .. 76125 .. 76155
2001 Jun 22
6
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 370 GENERAL DATA
MKT 370
PITCH 5 mm
296x12(full_width)
l
b
h
lt
P
Odt
CBA112
Fig.5 Outline. Specific reference data for the 100 V DC capacitors DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.47 F Rated voltage pulse slope (dU/dt)R at 100 V (DC) R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 100 V DC versions PACKAGING Ammopack DIMENSIONS H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/-0.5 mm Loose in box lt = 26.0 2.0 mm Taped on reel H = 18.5 mm; P0 = 12.7 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 370 85... 2222 370 86... 2222 370 21... 2222 370 22... 2222 370 25... 2222 370 26... 2222 370 28... 2222 370 29... ORDERING preferred preferred on request on request on request on request on request on request at 1 kHz VALUE at 10 kHz at 100 kHz
75 x 10-4 75 x 10-4
130 x 10-4 130 x 10-4
110 V/s
250 x 10-4 300 x 10-4
>15000 M >5000 s >30000 M
160 V; 1 minute 200 V; 1 minute
10% 5% 10% 5% 10% 5% 10% 5%
2001 Jun 22
7
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 100 V; URac = 63 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) AMMOPACK MASS (g) H = 18.5 mm; P0 = 12.7 mm C-tol = 10% catalogue number Pitch = 5.08 0.30 mm; dt = 0.50 0.05 mm 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 6.0 x 11.0 x 7.2 0.65 4.5 x 9.0 x 7.2 0.45 3.5 x 8.0 x 7.2 0.35 2.5 x 6.5 x 7.2 0.25 2222 370 85123 2222 370 85153 2222 370 85183 2222 370 85223 2222 370 85273 2222 370 85333 2222 370 85393 2222 370 85473 2222 370 85563 2222 370 85683 2222 370 85823 2222 370 85104 2222 370 85124 2222 370 85154 2222 370 85184 2222 370 85224 2222 370 85274 2222 370 85334 2222 370 85394 2222 370 85474
MKT 370
C-tol = 5% last 5 digits
.. 86123 .. 86153 .. 86183 .. 86223 .. 86273 .. 86333 .. 86393 .. 86473 .. 86563 .. 86683 .. 86823 .. 86104 .. 86124 .. 86154 .. 86184 .. 86224 .. 86274 .. 86334 .. 86394 .. 86474
2001 Jun 22
8
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 370 GENERAL DATA
MKT 370
PITCH 5 mm
296x12(full_width)
l
b
h
lt
P
Odt
CBA112
Fig.6 Outline. Specific reference data for the 250 V DC capacitors DESCRIPTION Tangent of loss angle Rated voltage pulse slope (dU/dt)R at 250 V (DC) R between leads at 100 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 250 V DC versions PACKAGING Ammopack DIMENSIONS H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/-0.5 mm Loose in box lt = 26.0 2.0 mm Taped on reel H = 18.5 mm; P0 = 12.7 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 370 35... 2222 370 36... 2222 370 41... 2222 370 42... 2222 370 45... 2222 370 46... 2222 370 48... 2222 370 49... ORDERING preferred preferred on request on request on request on request on request on request at 1 kHz VALUE at 10 kHz at 100 kHz
75 x 10-4
130 x 10-4
330 V/s
250 x 10-4
>30000 M >30000 M
400 V; 1 minute 500 V; 1 minute
10% 5% 10% 5% 10% 5% 10% 5%
2001 Jun 22
9
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 250 V; URac = 160 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) AMMOPACK MASS (g) H = 18.5 mm; P0 = 12.7 mm C-tol = 10% catalogue number Pitch = 5.08 0.30 mm; dt = 0.50 0.05 mm 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 6.0 x 11.0 x 7.2 0.60 4.5 x 9.0 x 7.2 0.45 3.5 x 8.0 x 7.2 0.35 2.5 x 6.5 x 7.2 0.25 2222 370 35392 2222 370 35472 2222 370 35562 2222 370 35682 2222 370 35822 2222 370 35103 2222 370 35123 2222 370 35153 2222 370 35183 2222 370 35223 2222 370 35273 2222 370 35333 2222 370 35393 2222 370 35473 2222 370 35563 2222 370 35683 2222 370 35823 2222 370 35104
MKT 370
C-tol = 5% last 5 digits
.. 36392 .. 36472 .. 36562 .. 36682 .. 36822 .. 36103 .. 36123 .. 36153 .. 36183 .. 36223 .. 36273 .. 36333 .. 36393 .. 36473 .. 36563 .. 36683 .. 36823 .. 36104
2001 Jun 22
10
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 370 GENERAL DATA
MKT 370
PITCH 5 mm
296x12(full_width)
l
b
h
lt
P
Odt
CBA112
Fig.7 Outline. Specific reference data for the 400 V DC capacitors DESCRIPTION Tangent of loss angle Rated voltage pulse slope (dU/dt)R at 400 V (DC) R between leads at 100 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 400 V DC versions PACKAGING Ammopack DIMENSIONS H = 18.5 mm; P0 = 12.7 mm lt = 4.0 +1.0/-0.5 mm Loose in box lt = 26.0 2.0 mm Taped on reel H = 18.5 mm; P0 = 12.7 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 370 65... 2222 370 66... 2222 370 51... 2222 370 52... 2222 370 55... 2222 370 56... 2222 370 58... 2222 370 59... ORDERING preferred preferred on request on request on request on request on request on request at 1 kHz VALUE at 10 kHz at 100 kHz
75 x 10-4
130 x 10-4
630 V/s
250 x 10-4
>30000 M >30000 M
640 V; 1 minute 800 V; 1 minute
10% 5% 10% 5% 10% 5% 10% 5%
2001 Jun 22
11
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 400 V; URac = 220 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) AMMOPACK MASS (g) H = 18.5 mm; P0 = 12.7 mm C-tol = 10% catalogue number Pitch = 5.08 0.30 mm; dt = 0.50 0.05 mm 0.001 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 6.0 x 11.0 x 7.2 0.60 4.5 x 9.0 x 7.2 0.45 3.5 x 8.0 x 7.2 0.35 2.5 x 6.5 x 7.2 0.25 2222 370 65102 2222 370 65122 2222 370 65152 2222 370 65182 2222 370 65222 2222 370 65272 2222 370 65332 2222 370 65392 2222 370 65472 2222 370 65562 2222 370 65682 2222 370 65822 2222 370 65103 2222 370 65123 2222 370 65153 2222 370 65183 2222 370 65223 2222 370 65273 2222 370 65333 2222 370 65393 2222 370 65473
MKT 370
C-tol = 5% last 5 digits
.. 66102 .. 66122 .. 66152 .. 66182 .. 66222 .. 66272 .. 66332 .. 66392 .. 66472 .. 66562 .. 66682 .. 66822 .. 66103 .. 66123 .. 66153 .. 66183 .. 66223 .. 66273 .. 66333 .. 66393 .. 66473
2001 Jun 22
12
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 371 GENERAL DATA
MKT 371
PITCH 7.5 mm
296x12(full_width)
l
b
h
lt P Odt
CBA113
Fig.8 Outline. Specific reference data for the 63 V DC capacitors DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.47 F 0.47 F < C 1.0 F Rated voltage pulse slope (dU/dt)R at 63 V (DC) R between leads, for C 0.33 F at 10 V; 1 minute RC between leads, for C > 0.33 F at 10 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 63 V DC versions PACKAGING Loose in box Ammopack Loose in box Taped on reel DIMENSIONS lt = 4.0 +1.0/-0.5 mm H = 18.5 mm; P0 = 12.7 mm lt = 26.0 2.0 mm H = 18.5 mm; P0 = 12.7 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 371 11... 2222 371 12... 2222 371 38... 2222 371 39... 2222 371 15... 2222 371 16... 2222 371 35... 2222 371 36... ORDERING preferred preferred preferred preferred on request on request on request on request at 1 kHz 75 x 10-4 75 x 10-4 75 x 10-4 VALUE at 10 kHz 130 x 10-4 130 x 10-4 130 x 10-4 18 V/s >15000 M >5000 s >30000 M 100 V; 1 minute 200 V; 1 minute at 100 kHz 250 x 10-4 300 x 10-4 -
10% 5% 10% 5% 10% 5% 10% 5%
2001 Jun 22
13
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 63 V; URac = 40 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% catalogue number Pitch = 7.62 +0.30/-0.40 mm; dt = 0.50 0.05 mm 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 5.0 x 10.5 x 10.0 0.7 4.0 x 9.0 x 10.0 0.5 3.0 x 8.0 x 10.0 0.4 2.5 x 6.5 x 10.0 0.3 2222 371 11563 2222 371 11683 2222 371 11823 2222 371 11104 2222 371 11124 2222 371 11154 2222 371 11184 2222 371 11224 2222 371 11274 2222 371 11334 2222 371 11394 2222 371 11474 2222 371 11564 2222 371 11684 2222 371 11824 2222 371 11105 .. 12563 .. 12683 .. 12823 .. 12104 .. 12124 .. 12154 .. 12184 .. 12224 .. 12274 .. 12334 .. 12394 .. 12474 .. 12564 .. 12684 .. 12824 .. 12105 .. 38563 .. 38683 .. 38823 .. 38104 .. 38124 .. 38154 .. 38184 .. 38224 .. 38274 .. 38334 .. 38394 .. 38474 .. 38564 .. 38684 .. 38824 .. 38105 C-tol = 5% last 5 digits
MKT 371
AMMOPACK H = 18.5 mm; P0 = 12.7 mm C-tol = 10% C-tol = 5%
last 5 digits
.. 39563 .. 39683 .. 39823 .. 39104 .. 39124 .. 39154 .. 39184 .. 39224 .. 39274 .. 39334 .. 39394 .. 39474 .. 39564 .. 39684 .. 39824 .. 39105
2001 Jun 22
14
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 371 GENERAL DATA
MKT 371
PITCH 7.5 mm
296x12(full_width)
l
b
h
lt P Odt
CBA113
Fig.9 Outline. Specific reference data for the 100 V DC capacitors DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.47 F Rated voltage pulse slope (dU/dt)R at 100 V (DC) R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 100 V DC versions PACKAGING Loose in box Ammopack Loose in box Taped on reel DIMENSIONS lt = 4.0 +1.0/-0.5 mm H = 18.5 mm; P0 = 12.7 mm lt = 26.0 2.0 mm H = 18.5 mm; P0 = 12.7 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 371 21... 2222 371 22... 2222 371 68... 2222 371 69... 2222 371 25... 2222 371 26... 2222 371 65... 2222 371 66... ORDERING preferred preferred preferred preferred on request on request on request on request at 1 kHz VALUE at 10 kHz at 100 kHz
75 x 10-4 75 x 10-4
130 x 10-4 130 x 10-4
36 V/s
250 x 10-4 300 x 10-4
>15000 M >5000 s >30000 M
160 V; 1 minute 200 V; 1 minute
10% 5% 10% 5% 10% 5% 10% 5%
2001 Jun 22
15
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 100 V; URac = 63 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% catalogue number Pitch = 7.62 +0.30/-0.40 mm; dt = 0.50 0.05 mm 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 5.0 x 10.5 x 10.0 0.7 4.0 x 9.0 x 10.0 0.5 3.0 x 8.0 x 10.0 0.4 2.5 x 6.5 x 10.0 0.3 2222 371 21183 2222 371 21223 2222 371 21273 2222 371 21333 2222 371 21393 2222 371 21473 2222 371 21563 2222 371 21683 2222 371 21823 2222 371 21104 2222 371 21124 2222 371 21154 2222 371 21184 2222 371 21224 2222 371 21274 2222 371 21334 2222 371 21394 2222 371 21474 .. 22183 .. 22223 .. 22273 .. 22333 .. 22393 .. 22473 .. 22563 .. 22683 .. 22823 .. 22104 .. 22124 .. 22154 .. 22184 .. 22224 .. 22274 .. 22334 .. 22394 .. 22474 .. 68183 .. 68223 .. 68273 .. 68333 .. 68393 .. 68473 .. 68563 .. 68683 .. 68823 .. 68104 .. 68124 .. 68154 .. 68184 .. 68224 .. 68274 .. 68334 .. 68394 .. 68474 C-tol = 5% last 5 digits
MKT 371
AMMOPACK H = 18.5 mm; P0 = 12.7 mm C-tol = 10% C-tol = 5%
last 5 digits
.. 69183 .. 69223 .. 69273 .. 69333 .. 69393 .. 69473 .. 69563 .. 69683 .. 69823 .. 69104 .. 69124 .. 69154 .. 69184 .. 69224 .. 69274 .. 69334 .. 69394 .. 69474
2001 Jun 22
16
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 371 GENERAL DATA
MKT 371
PITCH 7.5 mm
296x12(full_width)
l
b
h
lt P Odt
CBA113
Fig.10 Outline. Specific reference data for the 250 V DC capacitors DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.12 F Rated voltage pulse slope (dU/dt)R at 250 V (DC) R between leads at 100 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 250 V DC versions PACKAGING Loose in box Ammopack Loose in box Taped on reel DIMENSIONS lt = 4.0 +1.0/-0.5 mm H = 18.5 mm; P0 = 12.7 mm lt = 26.0 2.0 mm H = 18.5 mm; P0 = 12.7 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 371 41... 2222 371 42... 2222 371 78... 2222 371 79... 2222 371 45... 2222 371 46... 2222 371 75... 2222 371 76... ORDERING preferred preferred preferred preferred on request on request on request on request at 1 kHz VALUE at 10 kHz at 100 kHz
75 x 10-4 75 x 10-4
130 x 10-4 130 x 10-4
70 V/s
250 x 10-4 300 x 10-4
>30000 M >30000 M
400 V; 1 minute 500 V; 1 minute
10% 5% 10% 5% 10% 5% 10% 5%
2001 Jun 22
17
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 250 V; URac = 160 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% catalogue number Pitch = 7.62 +0.30/-0.40 mm; dt = 0.50 0.05 mm 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 5.0 x 10.5 x 10.0 0.7 4.0 x 9.0 x 10.0 0.5 3.0 x 8.0 x 10.0 0.4 2.5 x 6.5 x 10.0 0.3 2222 371 41822 2222 371 41103 2222 371 41123 2222 371 41153 2222 371 41183 2222 371 41223 2222 371 41273 2222 371 41333 2222 371 41393 2222 371 41473 2222 371 41563 2222 371 41683 2222 371 41823 2222 371 41104 2222 371 41124 .. 42822 .. 42103 .. 42123 .. 42153 .. 42183 .. 42223 .. 42273 .. 42333 .. 42393 .. 42473 .. 42563 .. 42683 .. 42823 .. 42104 .. 42124 .. 78822 .. 78103 .. 78123 .. 78153 .. 78183 .. 78223 .. 78273 .. 78333 .. 78393 .. 78473 .. 78563 .. 78683 .. 78823 .. 78104 .. 78124 C-tol = 5% last 5 digits
MKT 371
AMMOPACK H = 18.5 mm; P0 = 12.7 mm C-tol = 10% C-tol = 5%
last 5 digits
.. 79822 .. 79103 .. 79123 .. 79153 .. 79183 .. 79223 .. 79273 .. 79333 .. 79393 .. 79473 .. 79563 .. 79683 .. 79823 .. 79104 .. 79124
2001 Jun 22
18
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 371 GENERAL DATA
MKT 371
PITCH 7.5 mm
296x12(full_width)
l
b
h
lt P Odt
CBA113
Fig.11 Outline. Specific reference data for the 400 V DC capacitors DESCRIPTION Tangent of loss angle Rated voltage pulse slope (dU/dt)R at 400 V (DC) R between leads at 100 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 400 V DC versions PACKAGING Loose in box Ammopack Loose in box Taped on reel DIMENSIONS lt = 4.0 +1.0/-0.5 mm H = 18.5 mm; P0 = 12.7 mm lt = 26.0 2.0 mm H = 18.5 mm; P0 = 12.7 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 371 51... 2222 371 52... 2222 371 88... 2222 371 89... 2222 371 55... 2222 371 56... 2222 371 85... 2222 371 86... ORDERING preferred preferred preferred preferred on request on request on request on request at 1 kHz VALUE at 10 kHz at 100 kHz
75 x 10-4
130 x 10-4
190 V/s
250 x 10-4
>30000 M >30000 M
640 V; 1 minute 800 V; 1 minute
10% 5% 10% 5% 10% 5% 10% 5%
2001 Jun 22
19
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 400 V; URac = 220 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% catalogue number Pitch = 7.62 +0.30/-0.40 mm; dt = 0.50 0.05 mm 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 5.0 x 10.5 x 10.0 0.7 3.0 x 8.0 x 10.0 4.0 x 9.0 x 10.0 0.4 0.5 2.5 x 6.5 x 10.0 0.3 2222 371 51392 2222 371 51472 2222 371 51562 2222 371 51682 2222 371 51822 2222 371 51103 2222 371 51123 2222 371 51153 2222 371 51183 2222 371 51223 2222 371 51273 2222 371 51333 2222 371 51393 .. 52392 .. 52472 .. 52562 .. 52682 .. 52822 .. 52103 .. 52123 .. 52153 .. 52183 .. 52223 .. 52273 .. 52333 .. 52393 .. 88392 .. 88472 .. 88562 .. 88682 .. 88822 .. 88103 .. 88123 .. 88153 .. 88183 .. 88223 .. 88273 .. 88333 .. 88393 C-tol = 5% last 5 digits
MKT 371
AMMOPACK H = 18.5 mm; P0 = 12.7 mm C-tol = 10% C-tol = 5%
last 5 digits
.. 89392 .. 89472 .. 89562 .. 89682 .. 89822 .. 89103 .. 89123 .. 89153 .. 89183 .. 89223 .. 89273 .. 89333 .. 89393
2001 Jun 22
20
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 372 GENERAL DATA
MKT 372
PITCH 10 mm
l 296x12(full_width)
b
h
lt P Odt
CBA114
Fig.12 Outline. Specific reference data for the 100 V DC capacitors DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.68 F Rated voltage pulse slope (dU/dt)R at 100 V (DC) R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 100 V DC versions PACKAGING Loose in box Taped on reel Ammopack DIMENSIONS lt = 4.0 +1.0/-0.5 mm H = 18.5 mm; P0 = 12.7 mm H = 18.5 mm; P0 = 12.7 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 372 21... 2222 372 22... 2222 372 25... 2222 372 26... 2222 372 28... 2222 372 29... ORDERING preferred on request on request on request on request on request at 1 kHz VALUE at 10 kHz at 100 kHz
75 x 10-4 75 x 10-4
130 x 10-4 130 x 10-4
34 V/s
250 x 10-4 300 x 10-4
>15000 M >5000 s >30000 M
160 V; 1 minute 200 V; 1 minute
10% 5% 10% 5% 10% 5%
2001 Jun 22
21
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 100V; URac = 63 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) MASS (g) LOOSE IN BOX lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 5.0 x 11.0 x 12.5 6.0 x 12.0 x 12.5 0.9 1.0 4.0 x 10.0 x 12.5 0.7 2222 372 21104 2222 372 21124 2222 372 21154 2222 372 21184 2222 372 21224 2222 372 21274 2222 372 21334 2222 372 21394 2222 372 21474 2222 372 21564 2222 372 21684
MKT 372
2001 Jun 22
22
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 372 GENERAL DATA
MKT 372
PITCH 10 mm
l 296x12(full_width)
b
h
lt P Odt
CBA114
Fig.13 Outline. Specific reference data for the 250 V DC capacitors DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.22 F Rated voltage pulse slope (dU/dt)R at 250 V (DC) R between leads at 100 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 250 V DC versions PACKAGING Loose in box Taped on reel Ammopack DIMENSIONS lt = 4.0 +1.0/-0.5 mm H = 18.5 mm; P0 = 12.7 mm H = 18.5 mm; P0 = 12.7 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 372 41... 2222 372 42... 2222 372 45... 2222 372 46... 2222 372 48... 2222 372 49... ORDERING preferred on request on request on request on request on request at 1 kHz VALUE at 10 kHz at 100 kHz
75 x 10-4 75 x 10-4
130 x 10-4 130 x 10-4
50 V/s
250 x 10-4 300 x 10-4
>30000 M >30000 M
400 V; 1 minute 500 V; 1 minute
10% 5% 10% 5% 10% 5%
2001 Jun 22
23
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 250 V; URac = 160 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) MASS (g) LOOSE IN BOX lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 5.0 x 11.0 x 12.5 6.0 x 12.0 x 12.5 0.9 1.0 4.0 x 10.0 x 12.5 0.7 2222 372 41473 2222 372 41563 2222 372 41683 2222 372 41823 2222 372 41104 2222 372 41124 2222 372 41154 2222 372 41184 2222 372 41224
MKT 372
2001 Jun 22
24
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 372 GENERAL DATA
MKT 372
PITCH 10 mm
l 296x12(full_width)
b
h
lt P Odt
CBA114
Fig.14 Outline. Specific reference data for the 400 V DC capacitors DESCRIPTION Tangent of loss angle Rated voltage pulse slope (dU/dt)R at 400 V (DC) R between leads at 100 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 400 V DC versions PACKAGING Loose in box Taped on reel Ammopack DIMENSIONS lt = 4.0 +1.0/-0.5 mm H = 18.5 mm; P0 = 12.7 mm H = 18.5 mm; P0 = 12.7 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 372 51... 2222 372 52... 2222 372 55... 2222 372 56... 2222 372 58... 2222 372 59... ORDERING preferred on request on request on request on request on request at 1 kHz VALUE at 10 kHz at 100 kHz
75 x 10-4
130 x 10-4
80 V/s
250 x 10-4
>30000 M >30000 M
640 V; 1 minute 800 V; 1 minute
10% 5% 10% 5% 10% 5%
2001 Jun 22
25
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 400 V; URac = 220 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) MASS (g) LOOSE IN BOX lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 6.0 x 12.0 x 12.5 1.0 5.0 x 11.0 x 12.5 0.9 4.0 x 10.0 x 12.5 0.7 2222 372 51472 2222 372 51562 2222 372 51682 2222 372 51822 2222 372 51103 2222 372 51123 2222 372 51153 2222 372 51183 2222 372 51223 2222 372 51273 2222 372 51333 2222 372 51393 2222 372 51473 2222 372 51563 2222 372 51683 2222 372 51823
MKT 372
2001 Jun 22
26
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 372 GENERAL DATA
MKT 372
PITCH 10 mm
l 296x12(full_width)
b
h
lt P Odt
CBA114
Fig.15 Outline. Specific reference data for the 630 V DC capacitors DESCRIPTION Tangent of loss angle Rated voltage pulse slope (dU/dt)R at 400 (DC) R between leads at 500 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 630 V DC versions PACKAGING Loose in box Taped on reel Ammopack DIMENSIONS lt = 4.0 +1.0/-0.5 mm H = 18.5 mm; P0 = 12.7 mm H = 18.5 mm; P0 = 12.7 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 372 61... 2222 372 62... 2222 372 65... 2222 372 66... 2222 372 68... 2222 372 69... ORDERING preferred on request on request on request on request on request at 1 kHz VALUE at 10 kHz at 100 kHz
75 x 10-4
130 x 10-4
120 V/s
250 x 10-4
>30000 M >30000 M
1008 V; 1 minute 1260 V; 1 minute
10% 5% 10% 5% 10% 5%
2001 Jun 22
27
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 630 V; URac = 250 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) MASS (g) LOOSE IN BOX lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 5.0 x 11.0 x 12.5 6.0 x 12.0 x 12.5 0.9 1.0 4.0 x 10.0 x 12.5 0.6 2222 372 61103 2222 372 61123 2222 372 61153 2222 372 61183 2222 372 61223 2222 372 61273 2222 372 61333 2222 372 61393 2222 372 61473
MKT 372
2001 Jun 22
28
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 373 GENERAL DATA
MKT 373
PITCH 15 mm (COMPACT SIZE)
296x12(full_width)
l
b
h
lt P Odt
CBA115
Fig.16 Outline. Specific reference data for the 100 V DC capacitors DESCRIPTION Tangent of loss angle: 0.33 F < C 0.47 F 0.47 F < C 1.0 F 1.0 F < C 2.2 F Rated voltage pulse slope (dU/dt)R at 100 V (DC): R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 100 V DC versions PACKAGING Loose in box Taped on reel DIMENSIONS lt = 5.0 1.0 mm H = 18.5 mm; P0 = 12.7 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 373 23... 2222 373 24... 2222 373 27... 2222 373 28... ORDERING preferred on request on request on request at 1 kHz 75 x 10-4 75 x 10-4 75 x 10-4 VALUE at 10 kHz 130 x 10-4 130 x 10-4 150 x 10-4 14 V/s >15000 M >5000 s >30000 M 160 V; 1 minute 200 V; 1 minute at 100 kHz 300 x 10-4 - -
10% 5% 10% 5%
2001 Jun 22
29
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 100 V; URac = 63 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) MASS (g) LOOSE IN BOX lt = 5.0 1.0 mm C-tol = 10% Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.33 0.39 0.47 0.56 0.68 0.82 1 1.2 1.5 1.8 2.2 6.0 x 12.0 x 17.5 1.4 5.0 x 11.0 x 17.5 1.1 2222 373 23334 2222 373 23394 2222 373 23474 2222 373 23564 2222 373 23684 2222 373 23824 2222 373 23105 2222 373 23125 2222 373 23155 2222 373 23185 2222 373 23225
MKT 373
(COMPACT SIZE)
2001 Jun 22
30
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 373 GENERAL DATA
MKT 373
PITCH 15/22.5/27.5 mm (COMPACT SIZE)
296x12(full_width)
l
b
h
lt P Odt
CBA115
Fig.17 Outline. Specific reference data for the 250 V DC capacitors DESCRIPTION Tangent of loss angle: 0.15 F < C 0.47 F 0.47 F < C 1.0 F 1.0 F < C 4.7 F Rated voltage pulse slope (dU/dt)R at 250 V (DC): P = 15 mm P = 22.5 mm P = 27.5 mm R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 250 V DC versions PACKAGING(1) Loose in box Taped on reel Note 1. Taped on reel pitch = 27.5 mm is not available. 2001 Jun 22 31 DIMENSIONS lt = 5.0 1.0 mm H = 18.5 mm; P0 = 12.7 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 373 43... 2222 373 44... 2222 373 47... 2222 373 48... ORDERING preferred on request on request on request 16 V/s 7 V/s 6 V/s at 1 kHz VALUE at 10 kHz at 100 kHz
75 x 10-4 75 x 10-4 75 x 10-4
130 x 10-4 130 x 10-4 150 x 10-4
300 x 10-4 - -
>30000 M >10000 s >30000 M
400 V; 1 minute 500 V; 1 minute
10% 5% 10% 5%
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 250 V; URac = 160 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) MASS (g) LOOSE IN BOX lt = 5.0 1.0 mm C-tol = 10% Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 6.0 x 12.0 x 17.5 7.0 x 13.5 x 17.5 8.5 x 15.0 x 17.5 10.0 x 16.5 x 17.5 1.4 1.9 2.6 3.1 5.0 x 11.0 x 17.5 1.1 2222 373 43154 2222 373 43184 2222 373 43224 2222 373 43274 2222 373 43334 2222 373 43394 2222 373 43474 2222 373 43564 2222 373 43684 2222 373 43824 2222 373 43105 2222 373 43125
MKT 373
(COMPACT SIZE)
Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 1.5 1.8 2.2 2.7 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 4.4 5.5 2222 373 43155 2222 373 43185 2222 373 43225 2222 373 43275
Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 3.3 3.9 4.7 11.0 x 21.0 x 31.0 13.0 x 23.0 x 31.0 7.8 10.4 2222 373 43335 2222 373 43395 2222 373 43475
2001 Jun 22
32
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 373 GENERAL DATA
MKT 373
PITCH 15/22.5/27.5 mm (COMPACT SIZE)
296x12(full_width)
l
b
h
lt P Odt
CBA115
Fig.18 Outline. Specific reference data for the 400 V DC capacitors DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.47 F 0.47 F < C 1.0 F 1.0 F < C 1.5 F Rated voltage pulse slope (dU/dt)R at 400 V (DC): P = 15 mm P = 22.5 mm P = 27.5 mm R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 400 V DC versions PACKAGING(1) Loose in box Taped on reel Note 1. Taped on reel pitch = 27.5 mm is not available. DIMENSIONS lt = 5.0 1.0 mm H = 18.5 mm; P0 = 12.7 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 373 53... 2222 373 54... 2222 373 57... 2222 373 58... ORDERING preferred on request on request on request at 1 kHz 75 x 10-4 75 x 10-4 75 x 10-4 75 x 10-4 VALUE at 10 kHz 130 x 10-4 130 x 10-4 130 x 10-4 150 x 10-4 34 V/s 14 V/s 12 V/s >30000 M >10000 s >30000 M 640 V; 1 minute 800 V; 1 minute at 100 kHz 250 x 10-4 300 x 10-4 - -
10% 5% 10% 5%
2001 Jun 22
33
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 400 V; URac = 220 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) MASS (g) LOOSE IN BOX lt = 5.0 1.0 mm C-tol = 10% Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 6.0 x 12.0 x 17.5 7.0 x 13.5 x 17.5 8.5 x 15.0 x 17.5 10.0 x 16.5 x 17.5 1.4 1.9 2.6 3.2 5.0 x 11.0 x 17.5 1.1 2222 373 53473 2222 373 53563 2222 373 53683 2222 373 53823 2222 373 53104 2222 373 53124 2222 373 53154 2222 373 53184 2222 373 53224 2222 373 53274 2222 373 53334 2222 373 53394 2222 373 53474 2222 373 53564
MKT 373
(COMPACT SIZE)
Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 0.68 0.82 1 1.2 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 4.4 5.5 2222 373 53684 2222 373 53824 2222 373 53105 2222 373 53125
Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 1.5 11.0 x 21.0 x 31.0 7.8 2222 373 53155
2001 Jun 22
34
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 373 GENERAL DATA
MKT 373
PITCH 15/22.5/27.5 mm (COMPACT SIZE)
296x12(full_width)
l
b
h
lt P Odt
CBA115
Fig.19 Outline. Specific reference data for the 630 V DC capacitors DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.47 F 0.47 F < C 1.0 F Rated voltage pulse slope (dU/dt)R at 630 Vdc: P = 15 mm P = 22.5 mm P = 27.5 mm R between leads, for C 0.33 F at 500 V; 1 minute RC between leads, for C > 0.33 F at 500 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 630 V DC versions PACKAGING(1) Loose in box Taped on reel Note 1. Taped on reel pitch = 27.5 mm is not available. DIMENSIONS lt = 5.0 1.0 mm H = 18.5 mm; P0 = 12.7 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 373 63... 2222 373 64... 2222 373 67... 2222 373 68... ORDERING preferred on request on request on request at 1 kHz 75 x 10-4 75 x 10-4 75 x 10-4 VALUE at 10 kHz 130 x 10-4 130 x 10-4 130 x 10-4 90 V/s 35 V/s 30 V/s >30000 M >10000 s >30000 M 1008 V; 1 minute 1260 V; 1 minute at 100 kHz 250 x 10-4 300 x 10-4 -
10% 5% 10% 5%
2001 Jun 22
35
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 630 V; URac = 250 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) MASS (g) LOOSE IN BOX lt = 5.0 1.0 mm C-tol = 10% Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 5.0 x 11.0 x 17.5 6.0 x 12.0 x 17.5 7.0 x 13.5 x 17.5 8.5 x 15.0 x 17.5 10.0 x 16.5 x 17.5 1.1 1.4 1.9 2.6 3.2 2222 373 63563 2222 373 63683 2222 373 63823 2222 373 63104 2222 373 63124 2222 373 63154 2222 373 63184 2222 373 63224
MKT 373
(COMPACT SIZE)
Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 0.27 0.33 0.39 0.47 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 4.4 5.5 2222 373 63274 2222 373 63334 2222 373 63394 2222 373 63474
Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 0.56 0.68 0.82 1 11.0 x 21.0 x 31.0 13.0 x 23.0 x 31.0 15.0 x 25.0 x 31.0 7.8 10.5 7.8 2222 373 63564 2222 373 63684 2222 373 63824 2222 373 63105
2001 Jun 22
36
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 373 GENERAL DATA
MKT 373
PITCH 15/22.5/27.5 mm (STANDARD SIZE)
296x12(full_width)
l
b
h
lt P Odt
CBA115
Fig.20 Outline. Specific reference data for the 100 V DC capacitors DESCRIPTION Tangent of loss angle: 0.33 F < C 0.47 F 0.47 F < C 1.0 F 1.0 F < C 10 F C > 10 F Rated voltage pulse slope (dU/dt)R at 100 V (DC): P = 15 mm P = 22.5 mm P = 27.5 mm R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 100 V DC versions PACKAGING(1) Loose in box Taped on reel Note 1. Taped on reel pitch = 27.5 mm is not available. DIMENSIONS lt = 5.0 1.0 mm H = 18.5 mm; P0 = 12.7 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 373 21... 2222 373 22... 2222 373 25... 2222 373 26... ORDERING on request on request on request on request at 1 kHz 75 x 10-4 75 x 10-4 75 x 10-4 75 x 10-4 VALUE at 10 kHz 130 x 10-4 130 x 10-4 150 x 10-4 - 14 V/s 5 V/s 4 V/s >15000 M >5000 s >30000 M 160 V; 1 minute 200 V; 1 minute at 100 kHz 300 x 10-4 - - -
10% 5% 10% 5%
2001 Jun 22
37
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 100 V; URac = 63 V CATALOGUE NUMBER C (F) DIMENSIONS bxhxl (mm) MASS (g) LOOSE IN BOX lt = 5.0 1.0 mm C-tol = 10% Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.33 0.39 0.47 0.56 0.68 0.82 1 1.2 1.5 1.8 2.2 6.0 x 12.0 x 17.5 7.0 x 13.5 x 17.5 8.5 x 15.0 x 17.5 1.4 1.9 2.6 5.0 x 11.0 x 17.5 1.1 2222 373 21334 2222 373 21394 2222 373 21474 2222 373 21564 2222 373 21684 2222 373 21824 2222 373 21105 2222 373 21125 2222 373 21155 2222 373 21185 2222 373 21225
MKT 373
(STANDARD SIZE)
Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 2.7 3.3 3.9 4.7 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 4.4 5.5 2222 373 21275 2222 373 21335 2222 373 21395 2222 373 21475
Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 5.6 6.8 8.2 10 12 15 11.0 x 21.0 x 31.0 13.0 x 23.0 x 31.0 18.0 x 28.0 x 31.0 8.0 10.5 17.5 2222 373 21565 2222 373 21685 2222 373 21825 2222 373 21106 2222 373 21126 2222 373 21156
2001 Jun 22
38
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 373 GENERAL DATA
MKT 370/371/372/373
PITCH 15/22.5/27.5 mm (STANDARD SIZE)
296x12(full_width)
l
b
h
lt P Odt
CBA115
Fig.21 Outline. Specific reference data for the 250 V DC capacitors DESCRIPTION Tangent of loss angle: 0.15 F < C 0.47 F 0.47 F < C 1.0 F 1.0 F < C 4.7 F Rated voltage pulse slope (dU/dt)R at 250 V (DC): P = 15 mm P = 22.5 mm P = 27.5 mm R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 250 V DC versions PACKAGING(1) Loose in box Taped on reel Note 1. Taped on reel pitch = 27.5 mm is not available. DIMENSIONS lt = 5.0 1.0 mm H = 18.5 mm; P0 = 12.7 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 373 41... 2222 373 42... 2222 373 45... 2222 373 46... ORDERING on request on request on request on request at 1 kHz 75 x 10-4 75 x 10-4 75 x 10-4 VALUE at 10 kHz 130 x 10-4 130 x 10-4 150 x 10-4 16 V/s 7 V/s 6 V/s >30000 M >10000 s >30000 M 400 V; 1 minute 500 V; 1 minute at 100 kHz 300 x 10-4 - -
10% 5% 10% 5%
2001 Jun 22
39
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 250 V; URac = 160 V
MKT 370/371/372/373
(STANDARD SIZE) CATALOGUE NUMBER
C (F)
DIMENSIONS bxhxl (mm)
MASS (g)
LOOSE IN BOX lt = 5.0 1.0 mm C-tol = 10%
Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 7.0 x 13.5 x 17.5 8.5 x 15.0 x 17.5 1.9 2.6 6.0 x 12.0 x 17.5 1.4 5.0 x 11.0 x 17.5 1.1 2222 373 41154 2222 373 41184 2222 373 41224 2222 373 41274 2222 373 41334 2222 373 41394 2222 373 41474 2222 373 41564 2222 373 41684 2222 373 41824 2222 373 41105
Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 1.2 1.5 1.8 2.2 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 4.4 5.5 2222 373 41125 2222 373 41155 2222 373 41185 2222 373 41225
Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 2.7 3.3 3.9 4.7 13.0 x 23.0 x 31.0 15.0 x 25.0 x 31.0 10.4 12.5 2222 373 41275 2222 373 41335 2222 373 41395 2222 373 41475
2001 Jun 22
40
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 373 GENERAL DATA
MKT 370/371/372/373
PITCH 15/22.5/27.5 mm (STANDARD SIZE)
296x12(full_width)
l
b
h
lt P Odt
CBA115
Fig.22 Outline. Specific reference data for the 400 V DC capacitors DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.47 F 0.47 F < C 1.0 F 1.0 F < C 1.5 F Rated voltage pulse slope (dU/dt)R at 400 V (DC): P = 15 mm P = 22.5 mm P = 27.5 mm R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 400 V DC versions PACKAGING(1) Loose in box Taped on reel Note 1. Taped on reel pitch = 27.5 mm is not available. DIMENSIONS lt = 5.0 1.0 mm H = 18.5 mm; P0 = 12.7 mm C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 373 51... 2222 373 52... 2222 373 55... 2222 373 56... ORDERING on request on request on request on request at 1 kHz 75 x 10-4 75 x 10-4 75 x 10-4 75 x 10-4 VALUE at 10 kHz 130 x 10-4 130 x 10-4 130 x 10-4 150 x 10-4 34 V/s 14 V/s 12 V/s >30000 M >10000 s >30000 M 640 V; 1 minute 800 V; 1 minute at 100 kHz 250 x 10-4 300 x 10-4 - -
10% 5% 10% 5%
2001 Jun 22
41
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 400 V; URac = 220 V
MKT 370/371/372/373
(STANDARD SIZE) CATALOGUE NUMBER
C (F)
DIMENSIONS bxhxl (mm)
MASS (g)
LOOSE IN BOX lt = 5.0 1.0 mm C-tol = 10%
Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 6.0 x 12.0 x 17.5 7.0 x 13.5 x 17.5 8.5 x 15.0 x 17.5 1.4 1.9 2.6 5.0 x 11.0 x 17.5 1.1 2222 373 51473 2222 373 51563 2222 373 51683 2222 373 51823 2222 373 51104 2222 373 51124 2222 373 51154 2222 373 51184 2222 373 51224 2222 373 51274 2222 373 51334
Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 0.39 0.47 0.56 0.68 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 4.4 4.4 5.5 2222 373 51394 2222 373 51474 2222 373 51564 2222 373 51684
Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 0.82 1 1.2 1.5 11.0 x 21.0 x 31.0 15.0 x 25.0 x 31.0 7.8 12.8 2222 373 51824 2222 373 51105 2222 373 51125 2222 373 51155
2001 Jun 22
42
BCcomponents
Product specification
Metallized polyester film capacitors
CONSTRUCTION Description
MKT 370/371/372/373
SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION
AND SHOCK
* Low-inductive wound cell of metallized polyethylene terephthalate (PETP) film, potted with epoxy resin in a flame-retardant case * Radial leads, solder-coated * Small stand-off pips allow removal of solder flux etc. during cleaning of the printed-circuit board.
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board:
* For pitches of 15 mm capacitors shall be mechanically fixed by the leads. * For larger pitches the capacitors shall be mounted in the same way and the body clamped.
SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD The maximum length and width of film capacitors is shown in Fig.24:
metallized polyester film 144x12(halfpage)
* Eccentricity see Fig.24. The maximum eccentricity is smaller than or equal to the wire diameter of the product concerned. * Product height with seating plane as given by "IEC 60717" as reference: hmax h +0.3 mm.
metal spray layer 144x12(halfpage) bmax = b + 0.3 mm connecting wire
CBA073
eccentricity
lmax = l + 0.3 mm
CBA116
Fig.23 Construction. Fig.24 Lay-out. Mounting NORMAL USE The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by automatic insertion machines. For detailed tape specifications refer to this handbook, chapter "Packaging information". Storage temperature
* Storage temperature: Tstg = -25 to +40 C with RH maximum 80% without condensation.
RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply to an ambient free air temperature of 23 1 C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 2%. For reference testing, a conditioning period shall be applied over 96 4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%.
2001 Jun 22
43
BCcomponents
Product specification
Metallized polyester film capacitors
CHARACTERISTICS Capacitance
MKT 370/371/372/373
CBA117
2 296x12(full_width C/C (%) 1
0
-1
-2
-3 10 2
10 3
10 4
f (Hz)
10 5
Fig.25 Capacitance change as a function of frequency; typical curve.
296x12(full_width) 6 C/C (%) 4
CBA932
2
a. 63V, MKT 370; 0.12 to 1.5 F b. 400V and 630 V series c. 250V series d. 100V series e. 63V except MKT 370; 0.12 to 1.5 F
a b
0
max.
c
-2
typical
d e
-4 min. -6 -60
-20
20
60
Tamb (C)
100
Fig.26 Capacitance change at 1 kHz as a function of ambient free air temperature.
2001 Jun 22
44
BCcomponents
Product specification
Metallized polyester film capacitors
Impedance
MKT 370/371/372/373
296x12(full_width 10 2 Impedance () 10 1 MKT 370
CBA119
63V ;1
F
63V ; 10 0 nF
250
V; 1 0
nF
10 0
10-1
10-2
10-3 10 4
10 5
10 6
10 7
f (Hz)
10 8
Fig.27 Impedance as a function of frequency; typical curves. Maximum DC and AC voltage as a function of temperature
1.2 296x12(full_width) factor 1.0 0.8
CBB332
0.6 0.4
0.2 0 -60 -40 -20 0 20 40 60 80 Tamb (C) 100
Fig.28 Multiplying factor for DC and AC voltage as a function of temperature.
2001 Jun 22
45
BCcomponents
Product specification
Metallized polyester film capacitors
Maximum RMS voltage (sinewave) as a function of frequency
MKT 370/371/372/373
296x12(full_width) 10 2 MKT 370 AC voltage (V)
CBA120
10 1
56 n 10 F 0n 22 F 0n F 10 00 nF
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.29 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 63 V.
296x12(full_width) 10 2 MKT 370 AC voltage (V)
CBA788
10 1
10 0 10 1
56 nF 0n 22 F 0n F 10 00 nF
10
10 2
10 3
10 4
f (Hz)
10 5
Fig.30 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 63 V.
2001 Jun 22
46
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 370/371/372/373
296x12(full_width) 10 2 MKT 370
CBA121
AC voltage (V)
12 22 nF nF
10 1
47 10 33
nF 0n F 0n F
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.31 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 100 V.
296x12(full_width) 10 2 MKT 370
CBA789
AC voltage (V)
10
1
33
12 n 22 F nF 47 10 nF 0n F 0n F
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.32 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 100 V.
2001 Jun 22
47
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 370/371/372/373
296x12(full_width) 10 3 MKT 370 AC Voltage (V)
CBA122
10 2
10 1
4.7 nF 10 22 nF 47 nF 100nF nF
10 0 10 1
10 2
10 3
10 4
f (Hz)
10
5
Fig.33 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 250 V.
296x12(full_width) 10 3 MKT 370 AC Voltage (V)
CBA790
10 2
10 1
4.7 nF 10 22 nF 4 nF 1007 nF nF
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.34 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 250 V.
2001 Jun 22
48
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 370/371/372/373
296x12(full_width) 10 3 MKT 370 AC Voltage (V)
CBA123
10 2
1.0 nF 2.2 nF 4.7 10 nF n 33 F nF
10 1
10 0 10 1
10 2
10 3
10 4
f (Hz)
10
5
Fig.35 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 400 V.
296x12(full_width) 10 3 MKT 370 AC Voltage (V)
CBA791
10 2
10 1
1.0 n 2.2 F n 4.7 F 10 nF 33 nF nF
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.36 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 400 V.
2001 Jun 22
49
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 370/371/372/373
296x12(full_width) 10 2 MKT 371 AC voltage (V)
CBA124
10 1
0 22 nF 0 47 nF 0 10 nF 00 nF
10
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.37 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 63 V.
296x12(full_width) 10 2 MKT 371 AC voltage (V)
CBA792
10 1
10 22 0 nF 0n 47 F 10 0 n 00 F nF
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.38 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 63 V.
2001 Jun 22
50
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 370/371/372/373
296x12(full_width) 10 2 MKT 371 AC voltage (V)
CBA125
10 1
nF 47 10 nF 0n 22 F 0 47 nF 0n F
22
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.39 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 100 V.
296x12(full_width) 10 2 MKT 371 AC voltage (V)
CBA793
10 1
22 nF 47 10 nF 0n 22 F 0n 47 F 0n F
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.40 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 100 V.
2001 Jun 22
51
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 370/371/372/373
296x12(full_width) 10 3 MKT 371 AC Voltage (V)
CBA126
10 2
10 1
10 n 22 F nF 47 100 nF nF
10 0 10 1
10 2
10 3
10 4
f (Hz)
10
5
Fig.41 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 250 V.
296x12(full_width) 10 3 MKT 371 AC Voltage (V)
CBA794
10 2
10 1
10 n 22 F nF 47 100nF nF
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.42 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 250 V.
2001 Jun 22
52
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 370/371/372/373
296x12(full_width) 10 3 MKT 371 AC Voltage (V)
CBA127
10 2
4.7 nF 15 nF
10 1
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.43 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 400 V.
296x12(full_width) 10 3 MKT 371 AC Voltage (V)
CBA795
10 2
10 1
4.7 10 nF 15 nF nF
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.44 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 400 V.
2001 Jun 22
53
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 370/371/372/373
296x12(full_width) 10 2 MKT 372 AC voltage (V)
CBA128
10
10 1
22
F 0n 47 F 0n F
0n
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.45 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 100 V.
296x12(full_width) 10 2 MKT 372 AC voltage (V)
CBA796
10 1
10
22
47
0n
F
0n
0n
F
F
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.46 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 100 V.
2001 Jun 22
54
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 370/371/372/373
296x12(full_width) 10 3 MKT 372 AC Voltage (V)
CBA129
10 2
10 1
47 nF 150 nF
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.47 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 250 V.
296x12(full_width) 10 3 MKT 372 AC Voltage (V)
CBA797
10 2
10 1
47 nF 150 nF
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.48 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 250 V.
2001 Jun 22
55
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 370/371/372/373
296x12(full_width) 10 3 MKT 372 AC Voltage (V)
CBA130
10 2
4.7 nF 10 nF 22 n 47 F nF
10 1
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.49 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 400 V.
296x12(full_width) 10 3 MKT 372 AC Voltage (V)
CBA798
10 2
4.7
10 1
10
22 n 47 F nF
nF nF
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.50 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 400 V.
2001 Jun 22
56
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 370/371/372/373
296x12(full_width) 10 3 MKT 372 AC Voltage (V)
CBB300
10 2
10
nF 22 n 47 F nF
10 1
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.51 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 630 V.
296x12(full_width) 10 3 MKT 372 AC Voltage (V)
CBB301
10 2
10 1
10 nF 22 47 nF nF
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.52 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 630 V.
2001 Jun 22
57
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 370/371/372/373
296x12(full_width) 10 2 MKT 373 AC voltage (V)
CBA800
10 1
47 0n F
2.2
F
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.53 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 100 V (2222 373 23...; 24...; 27...; 28... compact size types).
296x12(full_width) 10 2 MKT 373 AC voltage (V)
CBA801
10 1
47
2.2
0n
F
F
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.54 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 100 V (2222 373 23...; 24...; 27...; 28... compact size types).
2001 Jun 22
58
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 370/371/372/373
296x12(full_width) 10 3 MKT 373 AC Voltage (V)
CBA803
10 2
10 1
470 2.2 nF 4.7 F F
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.55 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 250 V (2222 373 43...; 44...; 47...; 48... compact size types).
296x12(full_width) 10 3 MKT 373 AC Voltage (V)
CBA804
10 2
10 1
10 0 1 10
470 2.2 nF 4.7 F F
10 2 10 3 10 4 f (Hz) 10 5
Fig.56 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 250 V (2222 373 43...; 44...; 47...; 48... compact size types).
2001 Jun 22
59
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 370/371/372/373
296x12(full_width) 10 3 MKT 373 AC Voltage (V)
CBA806
10 2
10 1
100 nF 470 n 1.5 F F
10 0 10 1
10 2
10 3
10 4
f (Hz)
10
5
Fig.57 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 400 V (2222 373 53...; 54...; 57...; 58... compact size types).
296x12(full_width) 10 3 MKT 373 AC Voltage (V)
CBA807
10 2
10 1
100
nF 470 1.5 nF F
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.58 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 400 V (2222 373 53...; 54...; 57...; 58... compact size types).
2001 Jun 22
60
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 370/371/372/373
296x12(full_width) 10 3 MKT 373 AC Voltage (V)
CBA808
10 2
10 1
10 220 nF 0 1.0 nF F
10 0 10 1
10 2
10 3
10 4
f (Hz)
10
5
Fig.59 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 630 V (2222 373 63...; 64...; 67...; 68... compact size types).
296x12(full_width) 10 3 MKT 373 AC Voltage (V)
CBA823
10 2
10 1
10 220 nF 0 1.0 nF F
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.60 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 630 V (2222 373 63...; 64...; 67...; 68... compact size types).
2001 Jun 22
61
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 370/371/372/373
296x12(full_width) 10 2 MKT 373 AC voltage (V)
CBA131
10 1
47 0n F
4.7 15
F F
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.61 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 100 V (2222 373 21...; 22...; 25...; 26... standard size types).
296x12(full_width) 10 2 MKT 373 AC voltage (V)
CBA799
10 1
47
0n
F
15
4.7
F
F
10 0 10 1
10
2
10
3
10
4
f (Hz)
10 5
Fig.62 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 100 V (2222 373 21...; 22...; 25...; 26... standard size types).
2001 Jun 22
62
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 370/371/372/373
296x12(full_width) 10 3 MKT 373 AC Voltage (V)
CBA132
10 2
10 1
47 1. 0 nF 4.70 F F
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.63 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 250 V (2222 373 41...; 42...; 45...; 46... standard size types).
296x12(full_width) 10 3 MKT 373 AC Voltage (V)
CBA802
10 2
10 1
10 0 1 10
470 1.0 nF 4.7 F F
10 2
10 3
10 4
f (Hz)
10 5
Fig.64 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 250 V (2222 373 41...; 42...; 45...; 46... standard size types).
2001 Jun 22
63
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 370/371/372/373
296x12(full_width) 10 3 MKT 373 AC Voltage (V)
CBA133
10 2
10 1
100 n 470 F 1.5 nF F
10 0 10 1
10 2
10 3
10 4
f (Hz)
10
5
Fig.65 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 400 V (2222 373 51...; 52...; 55...; 56... standard size types).
296x12(full_width) 10 3 MKT 373 AC Voltage (V)
CBA805
10 2
10 1
100 470 nF 1.5 nF F
10 0 10 1
10 2
10 3
10 4
f (Hz)
10 5
Fig.66 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 400 V (2222 373 51...; 52...; 55...; 56... standard size types). Maximum RMS current (sinewave) as a function of frequency The maximum RMS current is defined by I ac = x C x U ac . Uac is the maximum AC voltage depending on the ambient temperature in Figs 29 to 66. 2001 Jun 22 64
BCcomponents
Product specification
Metallized polyester film capacitors
Tangent of loss angle
MKT 370/371/372/373
296x12(full_width) 10 3 dissipation factor (x 10-4)
CBA134
5 4 3 2 1
10 2
C 0.33 F (curve 1) 0.33 F < C 1.2 F (curve 2) 1.2 F < C 3.9 F (curve 3) 3.9 F < C < 6.8 F (curve 4) C 6.8 F (curve 5) 10 1 10 2
10 3
10 4
f (Hz)
10 5
Fig.67 Tangent of loss angle as a function of frequency; typical curve. Insulation resistance
5 296x12(full_width) 10
CBA135
RC (s)
10
4
10 3
10 2 -50
0
50
Tamb (C)
100
Fig.68 RC product as a function of ambient free air temperature; typical curve.
2001 Jun 22
65
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 370/371/372/373
Maximum allowed component temperature rise (T) as a function of the ambient temperature (Tamb)
16 296x12(full_width) T 14 (C) 12 10 8 6 4 2 0 -60 -40 -20 0 20 40 60 80 100 Tamb (C)
CBB191
Fig.69 Maximum allowed component temperature rise as a function of the ambient temperature. Heat conductivity (G) as a function of pitch and capacitor body thickness in mW/C Table 1 Heat conductivity PITCH (mm) 5 2.5 - 3.0 - 4.0 - 5.5 - - - - - - - 7.5 3 4 - 5 - 6 7 - - - - - - - 10 - - - 6.0 - 7.5 9.0 - - - - - - - 15 - - - - - 10 11 12 16 18 - - - - 22.5 - - - - - - 19 21 25 28 - - - - 27.5 - - - - - - - - - - 36 42 48 57
bmax (mm) 2.5 3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.5 10.0 11.0 13.0 15.0 18.0
Power dissipation and maximum component temperature rise The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The power dissipation can be calculated according chapter "Introduction", section "Maximum power dissipation". The component temperature rise (T) can be measured (see section "Measuring the component temperature" for more details) or calculated by T = P G :
* T = component temperature rise (C). * P = power dissipation of the component (mW). * G = heat conductivity of the component (mW/C).
2001 Jun 22 66
BCcomponents
Product specification
Metallized polyester film capacitors
Measuring the component temperature A thermocouple must be attached to the capacitor body as in Fig.70.
MKT 370/371/372/373
144x12(halfpage) thermocouple
CBA758
Fig.70 Mounting the thermocouple.
The temperature is measured in unloaded (Tamb) and maximum loaded condition (Tc). The temperature rise is given by T = T c - T amb . To avoid radiation or convection, the capacitor should be tested in a wind-free box.
2001 Jun 22
67
BCcomponents
Product specification
Metallized polyester film capacitors
Application note and limiting conditions
MKT 370/371/372/373
These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc). 2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum Up-p to avoid the ionisation inception level. 3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URdc and divided by the applied voltage. For all other pulses following equation must be fulfilled: dU 2 dU 2 x ------- x dt < U Rdc x ------- dt dt rated
0 T
T is the pulse duration. 4. The maximum component surface temperature rise must be lower than the limits in Fig.69. 5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values mentioned in Table 1 "Heat conductivity". 6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with an impedance to the mains the applicant must guarantee that following conditions are fulfilled in any case (spikes and surge voltages from the mains included). VOLTAGE CONDITIONS FOR 6 ABOVE ALLOWED VOLTAGES Maximum continuous RMS voltage Maximum temporary RMS -overvoltage (<24 hours) Maximum peak voltage (Vo-p) (<2 s) Tamb 85 C URac 1.25 x URac 1.6 x URdc 85 C < Tamb 105 C 0.8 x URac 1.0 x URac 1.3 x URdc
2001 Jun 22
68
BCcomponents
Product specification
Metallized polyester film capacitors
Example C = 3300 nF - 100 V used for the voltage signal shown in Fig.71. Up-p = 80 V; Up = 70 V; T1 = 0.5 ms; T2 = 1 ms. The ambient temperature is 35 C. Checking the conditions: 1. The peak voltage Up = 70 V is lower than 100 V (DC).
MKT 370/371/372/373
2. The peak-to-peak voltage 80 V is lower than 2 x 2 x 63 V ( AC ) = 178 U p - p . 3. The voltage pulse slope dU/dt = 80 V/500 s = 0.16 V/s. This is lower than 8 V/s (see specific reference data for each version). 4. The dissipated power is 60 mW as calculated with Fourier terms. 60 mW The temperature rise for bmax = 7.0 mm and pitch = 15 mm will be ------------------------------ = 5 C . 12 mW C This is lower than 15 C temperature rise at 35 C; see Fig.69. 5. Not applicable. 6. Not applicable.
296x12(full_width) voltage
Up
Up-p
time
T1 T2
CBA865
Fig.71 Voltage signal.
2001 Jun 22
69
BCcomponents
Product specification
Metallized polyester film capacitors
MARKING Product marking CAPACITORS WITH PITCH = 5.08 mm: STYLE 2222 370 The capacitors are marked on the side (see Fig.72) with the following information: 1. Capacitance code in accordance with "IEC 60062" 2. Tolerance on rated capacitance: K = 10%; J = 5% 3. Rated voltage (DC) (e.g. 63 V) 4. Code for manufacturer 5. Year and week of manufacture (e.g. 0001) 6. Manufacturer's type designation (e.g. 370).
144x12(halfpage)
MKT 370/371/372/373
FRONT FACE
820n K 63V BC 0001 370
CBB072
Fig.72 Example of marking for a capacitor with pitch = 5.08 mm.
CAPACITORS WITH PITCH = 7.62 mm: STYLE 2222 371 The capacitors are marked on the side (see Fig.73) with the following information: 1. Capacitance code in accordance with "IEC 60062" 2. Tolerance on rated capacitance: K = 10%; J = 5% 3. Rated voltage (DC) (e.g. 100 V) 4. Code for manufacturer 5. Year and week of manufacture (e.g. 0001) 6. Manufacturer's type designation (e.g. 371).
CBB048
144x12(halfpage)
FRONT FACE
100n K 100V BC 0001 371
Fig.73 Example of marking for a capacitor with pitch = 7.62 mm. CAPACITORS WITH PITCH = 10 mm: STYLE 2222 372 The capacitors are marked on the side (see Fig.74) with the following information: 1. Year and week of manufacture (e.g. 0001) 2. Capacitance code in accordance with "IEC 60062" 3. Tolerance on rated capacitance: K = 10%; J = 5%; 4. Rated voltage (DC) (e.g. 100 V) 5. Code for dielectric material (MKT) 6. Manufacturer's type designation (e.g. 372) 7. Code for manufacturer. 8. Code for factory of origin (HQ)
CBB049
144x12(halfpage)
FRONT FACE
0001 100 n K 100V MKT 372 BC-HQ
Fig.74 Example of marking for a capacitor with pitch = 10 mm.
2001 Jun 22
70
BCcomponents
Product specification
Metallized polyester film capacitors
CAPACITORS WITH PITCH = 15 mm: STYLES 2222 373 The capacitors are marked on the top (see Fig.75) with the following information: 1. Rated capacitance code in accordance with "IEC 60062" 2. Tolerance on rated capacitance: K = 10%; J = 5% 3. Rated voltage (DC) (e.g. 100 V) 4. Manufacturer's type designation (373) 5. Code for dielectric material (MKT); and on the side with the following information: 1. Manufacturer 2. Code for factory of origin (HQ) 3. Year and week of manufacture (e.g. 0001). CAPACITORS WITH PITCH = 22.5 AND 27.5 mm: STYLES 2222 373 The capacitors are marked on the top (see Fig.76) with the following information: 1. Rated capacitance code in accordance with "IEC 60062" 2. Tolerance on rated capacitance: K = 10%; J = 5% 3. Rated voltage (DC) (e.g. 100 V) 4. Manufacturer 5. Manufacturer's type designation (373) 6. Code for dielectric material (MKT) 7. Code for factory of origin (HQ) 8. Year and week of manufacture (e.g. 0001).
CBB051
MKT 370/371/372/373
HEAD 144x12(halfpage) FACE
470n K 100V 373 MKT
FRONT FACE
BC HQ0001
CBB050
Fig.75 Example of marking for a capacitor with pitch = 15.0 mm.
144x12(halfpage)
HEAD FACE
22 K 100V BC 373 MKT HQ0001
Fig.76 Example of marking for a capacitor with pitch = 22.5 and 27.5 mm.
2001 Jun 22
71
BCcomponents
Product specification
Metallized polyester film capacitors
Package marking The package containing the capacitors is marked as shown in Fig.77.
MKT 370/371/372/373
Barcode label marking LINE 1 2 3 4 5 6 7 MARKING EXPLANATION Manufacturer's name Country of origin Sub-family Type description Capacitance value in F, tolerance, voltage and climatic category ("IEC 60068-1")
-
Preference origin code: A Country of origin in code: 170 (Belgium) Responsible production centre: HQ WO: work order Wage number of final inspection (only for capacitors with pitch = 5, 7.5 and 10 mm) Product type description Quantity and production period, year and week code Product code (12NC)
8 9 10
Fig.77 Barcode label.
2001 Jun 22
72
BCcomponents
Product specification
Metallized polyester film capacitors
QUICK REFERENCE TEST REQUIREMENTS TEST Robustness of leads Tensile strength: "IEC 60068-2-21" Bending: "IEC 60068-2-21" Resistance to soldering heat: "IEC 60068-2-20" Component solvent resistance Robustness of component Vibration: "IEC 60068-2-6" Shock: "IEC 60068-2-27" Climatic sequence Dry heat: "IEC 60068-2-2" Damp heat cyclic, test Db, first cycle: "IEC 60068-2-30" Cold: "IEC 60068-2-1" Damp heat, test Db, remaining cycles: "IEC 60068-2-30" Other applicable tests Damp heat, steady state: "IEC 60068-2-3" 56 days; 40 C; 90 to 95% RH 2 hours; -55 C 16 hours; 105 C 10 to 55 Hz; amplitude 0.75 mm or acceleration 98 m/s2; 6 hours half sinewave; 490 m/s2; 11 ms load 10 N; 10 s load 5 N; 4 x 90 solder bath: 260 C; 10 s isopropyl alcohol; 23 C; 5 minutes PROCEDURE (quick reference)
MKT 370/371/372/373
REQUIREMENTS
no visible damage legible marking
C/C 2% tan 30 x 10-4; note 1
C/C 3% tan 30 x 10-4; note 1
C/C 3% tan 50 x 10-4; note 1
Rins 50% of specified value
C/C 5% tan 50 x 10-4; note 1
Rins 50% of specified value
Endurance (DC): "IEC 60384-2"
2000 hours; 1.25 x URdc; 85 C 1 x URdc; 105 C 2000 hours; 105 C 1000 hours: 1.1 x URac; 85 C
C/C 5% tan 30 x 10-4; note 1
Rins 50% of specified value
Heat storage: "IEC 60384-2" Endurance (AC): "IEC 60384-2"
C/C 3% tan 30 x 10-4; note 1 C/C 8% (style 370) C/C 5% (style 371) C/C 3% (style 372 and 373) tan 30 x 10-4; note 1
2001 Jun 22
73
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 370/371/372/373
TEST Resistance to detergents
PROCEDURE (quick reference) 3 minutes in dishwater at 70 C
REQUIREMENTS
C/C 1% tan 30 x 10-4; note 1
Rins 50% of specified value
Resistance to soldering heat with preheating: "IEC 60384-2" Passive flammability "IEC 60384-1" Note 1. Measuring frequency 10 kHz.
body temperature: 100 C; bath temperature: 260 C; dwell time: 5 s Class C
C/C 2% tan 30 x 10-4; note 1
no burning
2001 Jun 22
74

▲Up To Search▲

Price & Availability of MKT370

	To Download MKT370 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .