 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HMC533LP4 / 533LP4E v00.0405 MMIC VCO w/ DIVIDE-BY-16, 23.8 - 24.8 GHz Typical Applications Low noise MMIC VCO w/Divide-by-16 for: * VSAT Radio * Point to Point/Multipoint Radio * Test Equipment & Industrial Controls * Military End-Use * Automotive Radar Features Pout: +12 dBm Phase Noise: -95 dBc/Hz @100 KHz Typ. No External Resonator Needed Single Supply: +5V @ 220 mA QFN Leadless SMT Package, 16 mm2 9 VCOs & PLOs - SMT Functional Diagram General Description The HMC533LP4 & HMC533LP4E are GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC VCOs. The HMC533LP4 & HMC533LP4E integrate resonators, negative resistance devices, varactor diodes and feature a divide-by-16 output. The VCO's phase noise performance is excellent over temperature, shock, and process due to the oscillator's monolithic structure. Power output is +12 dBm typical from a +5V supply voltage. Prescaler function can be disabled to conserve current if not required. The voltage controlled oscillator is packaged in a leadless QFN 4 x 4 mm surface mount package. Electrical Specifications, TA = +25 C, Vcc1, Vcc2, Vcc3 = +5V Parameter Frequency Range Power Output SSB Phase Noise @ 100 kHz Offset, Vtune= +5V @ RFOUT Tune Voltage Supply Current Tune Port Leakage Current (Vtune= 13V) Output Return Loss Harmonics/Subharmonics Pulling (into a 2.0:1 VSWR) Pushing @ Vtune= 5V Frequency Drift Rate 1/2 3/2 3 26 37 13 80 2.3 Vtune Icc 2 180 220 RFOUT RFOUT/16 +9 -7 Min. Typ. 23.8 - 24.8 +12 -4 -95 13 260 10 +15 -1 Max. Units GHz dBm dBm dBc/Hz V mA A dB dBc dBc MHz pp MHz/V MHz/C 9 - 148 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC533LP4 / 533LP4E v00.0405 MMIC VCO w/ DIVIDE-BY-16, 23.8 - 24.8 GHz Frequency vs. Tuning Voltage, T= 25C 26 25.6 OUTPUT FREQUENCY (GHz) 25.2 24.8 24.4 24 23.6 23.2 22.8 22.4 22 0 1 2 3 4 5 6 7 8 9 10 11 12 13 Vcc=4.75V Vcc=5.0V Vcc=5.25V Frequency vs. Tuning Voltage, Vcc= +5V 26 25.6 OUTPUT FREQUENCY (GHz) 25.2 24.8 24.4 24 23.6 23.2 22.8 22.4 22 0 1 2 3 4 5 6 7 8 9 10 11 12 13 +25 C +85 C -40 C 9 VCOs & PLOs - SMT TUNING VOLTAGE (VOLTS) TUNING VOLTAGE (VOLTS) Sensitivity vs. Tuning Voltage, Vcc= +5V 600 500 400 300 200 100 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 TUNING VOLTAGE (VOLTS) +25 C +85 C -40 C Output Power vs. Tuning Voltage, Vcc= +5V 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 0 1 2 3 4 5 6 7 SENSITIVITY (MHz/VOLT) OUTPUT POWER (dBm) +25 C +85 C -40 C 8 9 10 11 12 13 TUNING VOLTAGE (VOLTS) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 149 HMC533LP4 / 533LP4E v00.0405 MMIC VCO w/ DIVIDE-BY-16, 23.8 - 24.8 GHz SSB Phase Noise vs. Tuning Voltage -60 -65 SSB PHASE NOISE (dBc/Hz) SSB Phase Noise @ Vtune= +5V 0 SSB PHASE NOISE (dBc/Hz) -20 -40 -60 -80 -100 -120 -140 -160 3 10 +25 C +85 C -40 C -70 -75 -80 -85 -90 -95 -100 -105 -110 1 2 3 4 5 6 7 8 9 10 11 12 13 TUNING VOLTAGE (VOLTS) 10kHz offset 100kHz offset 9 VCOs & PLOs - SMT 10 4 10 5 10 6 10 7 OFFSET FREQUENCY (Hz) Divide-by-16 Frequency vs. Tuning Voltage, Vcc= +5V 1.625 1.6 OUTPUT FREQUENCY (GHz) Divide-by-16 Output Power vs. Tuning Voltage, Vcc= +5V 0 -1 OUTPUT POWER (dBm) -2 -3 -4 -5 -6 -7 -8 -9 -10 +25 C +85 C -40 C 1.575 1.55 1.525 1.5 1.475 1.45 1.425 1.4 1.375 0 1 2 3 4 5 6 7 8 9 10 11 12 13 TUNING VOLTAGE (VOLTS) +25 C +85 C -40 C 0 1 2 3 4 5 6 7 8 9 10 11 12 13 TUNING VOLTAGE (VOLTS) 9 - 150 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC533LP4 / 533LP4E v00.0405 MMIC VCO w/ DIVIDE-BY-16, 23.8 - 24.8 GHz Absolute Maximum Ratings Vcc1, Vcc2 Vtune Junction Temperature Continuous Pdiss (T=85 C) (derate 28 mW/C above 85 C Thermal Resistance Storage Temperature Operating Temperature ESD Sensitivity (HBM) 5.5 V 0 to 15V Max. 135 C 1.4 W 36 C/W -65 to +150 C -40 to +85 C Class 1A Typical Supply Current vs. Vcc Vcc (V) 4.75 5.0 5.25 Icc (mA) 200 220 240 Note: VCO will operate over full voltage range shown above. ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 9 VCOs & PLOs - SMT Outline Drawing NOTES: 11. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number HMC533LP4 HMC533LP4E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H533 XXXX H533 XXXX [2] [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 151 HMC533LP4 / 533LP4E v00.0405 MMIC VCO w/ DIVIDE-BY-16, 23.8 - 24.8 GHz Pin Descriptions Pin Number 1, 15, 17, 21, 23 Function GND Description Package bottom has an exposed metal paddle that must also be connected to RF/DC ground. Interface Schematic 2 RFOUT/16 Divided-by-16 Output 9 VCOs & PLOs - SMT 3, 4 VCC2, VCC3 Suppy voltage for prescaler. If prescaler is not required, these pins may be left open to conserve 100 mA of current 5-14, 18, 19, 24 No Connection. These pins may be connected to RF/ DC ground. Performance will not be affected. N/C 16 RFOUT RF output (AC coupled). 20 VCC1 Supply Voltage, +5V 22 VTUNE Control Voltage Input. Modulation port bandwidth dependent on drive source impedance. 9 - 152 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC533LP4 / 533LP4E v00.0405 MMIC VCO w/ DIVIDE-BY-16, 23.8 - 24.8 GHz Evaluation PCB 9 VCOs & PLOs - SMT List of Materials for Evaluation PCB 106651 [1] Item J1 - J2 J3 J4 - J5 C1 - C2 C3 C4 -C5 U1 PCB [2] Description PCB Mount SMA RF Connector 2.92 mm PCB mount k-connector 2 mm DC Header 4.7 F Tantalum Capacitor 100 pF Capacitor, 0402 Pkg. 1,000 pF Capacitor, 0603 Pkg. HMC533LP4 / HMC533LP4E VCO 106546 Eval Board The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and backside ground slug should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 153 HMC533LP4 / 533LP4E v00.0405 MMIC VCO w/ DIVIDE-BY-16, 23.8 - 24.8 GHz Typical Application Circuit 9 VCOs & PLOs - SMT 9 - 154 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC533LP4 / 533LP4E v00.0405 MMIC VCO w/ DIVIDE-BY-16, 23.8 - 24.8 GHz Notes: 9 VCOs & PLOs - SMT For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 155 |
Price & Availability of HMC533LP4E
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |