View TM150XG-76N08_502751.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ENGINEERING SPECIFICATIONS
TFT COLOR LCD MODULE
TM150XG-76N08
- 38cm (15.0 inch) diagonal - XGA resolution (1024 x RGB x768 Pixel) - I/F : TTL(RGB x 8 bits x 2 Port) - Drive system : Pseudo 8 bits - Front mount - With CCFL backlight unit
(TENTATIVE)
Ver.1 Apr. 2, 2001
Tottori SANYO Electric Co., Ltd. Electronic Device Business Headquarters LCD Division
3-201, Minami-yoshikata, Tottori, 680-8634 Japan TEL: 81-857-21-2941, 1958 FAX: 81-857-21-2162
Department Manager
S. IWASAKI
Engineering Manager
K.REMBUTSU
NOTICES 1. The contents stated in this document and the product may be subject to change without prior notice. When you kindly study to use this product, please ask us or our distributor for the latest information. 2. This product is developed and produced for usage onto normal electronic products (office automation equipments, communication peripherals, electric appliance products, game machines, etc.) and is not suitable for applications which need extremely high reliability and extreme safety (aero- or space-use machines, control equipments for nuclear power, life keeping equipments, etc.). 3. This document shall not grant or guarantee any right to adapt intellectual property or any other patents of third party. 4. Please use this product correctly according to operating conditions and precautions for use stated in this document. Please install safety proof in your designing to avoid human accident, fire accident and social damage, which may be resulted from malfunction of this product. 5. This product is not designed to withstand against radiant rays. 6. It is strictly prohibited to copy or publish a part or whole of this document without our prior written approval. REVISION HISTORY
DATE Apr.2,01 REVISION NO. Ver. 1 PAGE Initial Release DESCRIPTIONS
Tottori SANYO Electric Co., Ltd.
TM150XG-76N08
Ver.1 Page
1/16
MECHANICAL CHARACTERISTICS
ITEM Module size Resolution Sub pixel pitch Pixel pitch Active viewing area Bezel opening area Weight SPECIFICATION 347.3(W) x 261.35(H) x 24.5 Typ.(t) 1024 x RGB(W) x 768(H) 0.099(W) x 0.297(H) 0.297(W) x 0.297(H) 304.128(W) x 228.096(H) 308.8(W) x 232.7(H) TBD Typ. Ta=25 degC UNIT mm pixel mm mm mm mm g
ELECTRICAL ABSOLUTE MAXIMUM RATINGS
ITEM Power supply voltage Input voltage Lamp current Lamp supply voltage SYMBOL VDD-VSS VI IL VHV VLGND MIN -0.3 VSS-0.3 MAX 6.0 3.3+0.5 TBD 2000 100 UNIT V V mA Vrms Vrms Ta=25 degC NOTE
ENVIRONMENTAL ABSOLUTE MAXIMUM RATINGS
ITEM Ambient temperature Humidity Vibration Shock SYMBOL TST TOP CONDITIONS Storage Operation Ta=40 degC max. Storage Storage MIN -20 0 MAX 60 50 85 1.5 50 UNIT degC %RH G G Ta=25 degC NOTE Note 1 No condensation Note 2 Note 3 XYZ 11ms/direction
[Note 1] Care should be taken so that the LCD module may not be subjected to the temperature beyond this specification. [Note 2] Ta>40 degC: Absolute humidity shall be less than that of 85%RH/40 degC. [Note 3] 10-200Hz, 30min/cycle, X/Y/Z each one cycle and except for resonant frequency.
ELECTRICAL CHARACTERISTICS
ITEM Power supply voltage Input logic voltage Power supply current VDD=5.0V ,fV=60Hz ,fCLK=32.5MHz ,Ta=25 degC SYMBOL CONDITIONS MIN TYP MAX UNIT NOTE VDD-VSS 4.5 5.0 5.5 V VTH High level 2.0 3.6 V Low level VSS 0.8 VTL IDD Note 1 TBD TBD mA Note 1
[Note 1] Under the following display image : Typical Value: Display pattern is 64 gray scale bar.
Tottori SANYO Electric Co., Ltd.
TM150XG-76N08
Ver.1 Page
2/16
OPTICAL CHARACTERISTICS
ITEM SYMBOL CONDITIONS Brightness B =0 deg. Brightness uniformity B =0 deg. Contrast ratio CR =0 deg. = 0 deg. = 90 deg. Viewing angle range CR>10 =180 deg. =270 deg. Rise tr Response =0 deg. time Fall tf x Red y x Green y Color of CIE =0 deg. Coordinate x Blue y x White y Ta=25 degC, VDD=5.0V, fV=60Hz MIN TYP MAX UNIT NOTE 2 400 450 cd/m Note 5,7,8 1.45 Note 6,7,8 400 Note 2,4,8 (70) (85) (70) (85) Note 1,2, deg. 4,8 (70) (85) (70) (85) (15) ms. Note 3,4,8 (10) TBD TBD TBD TBD Note 4,8 TBD TBD TBD 0.285 TBD TBD 0.293 TBD
[Note 1] Definition of and :
=180 DATA
[Note 3] Definition of Response time:
Black
100%
White
Black
=270
=90
B
90% 10% 0%
=0
tr
tf
[Note 2] Definition of Contrast ratio "CR": Brightness at White CR = Brightness at Black
[Note 4] This shall be measured at center (point No.3 shown in Note 7). [Note 5] The brightness shall be the average of five points shown in Note 7. [Note 6] The brightness uniformity " B" is defined as :
B =
Maximum brightness of five points Minimum brightness of five points
Tottori SANYO Electric Co., Ltd.
TM150XG-76N08
Ver.1 Page
3/16
[Note 7] Measurement points 1/6Hp 1/2Hp 5/6Hp
Active area 1/6Vp 1/2Vp 5/6Vp 4 1 3 5 Vp: Total Number of Vertical pixel Hp: Total Number of Horizontal pixel 2
[Note 8] Measurement condition (1) Measurement equipment: BM-5A (TOPCON Corp.), Field=2 degree (2) Ambient temperature Ta: 25 +/- 2 degC (3) LCD: All pixels are WHITE, VDD=5.0V, fV=60Hz (4) Measure after 30 minutes of Lamp warm up. (5) IL=TBD mArms with the Lamp inverter TBD.
BACKLIGHT CHARACTERISTICS
This module is used the direct type backlight. The backlight system is used 8 lamps. The characteristics of single lamp are shown in the following tables. Ta=25 degC ITEM Lamp voltage Lamp current Operating frequency Start up voltage Lamp life SYM. CONDITIOS MIN VL IL TBD fL TBD VS TBD tOL TYP TBD TBD MAX TBD TBD TBD UNIT Vrms mArms kHz Vrms Hours NOTE at IL= TBD mArms
Recommended value Recommended value
at Ta=0 degC at IL= TBD mArms
[Note 1] Backlight driving conditions (operating frequency fL especially) may interfere with horizontal frequency fH, causing the beat or flicker on the display. Therefore the operating frequency fL shall be adjusted in relation to horizontal frequency fH to avoid interference. [Note 2] The inverter open voltage should be larger than start up voltage, otherwise backlight may blinking for a moment after turns on or not be turned on. And this voltage should be applied to Lamp for more than 1 second to start up, otherwise backlight may not be turned on. [Note 3] If driving current waveform is asymmetrical, mercury deviation inside of Lamp will incline to one side and consequently abnormal lighting may occur. To prevent such unfavorable lighting, driving current waveform is asked to have unbalance rate of less than 10% and wave-height rate of less than 2 +/- 10%. And this driving waveform shall be confirmed in your system.
Unbalance rate = | Ip - I-p | / IL x 100 (%) Ip Wave-height rate = Ip (or I-p) / IL Ip I-p Current waveform IL : High peak value : Effective value
I-p : Low peak value
[Note 4] The inverter of ground reference type should be used. The inverter of ground floating type should not be used.
Tottori SANYO Electric Co., Ltd.
TM150XG-76N08
Ver.1 Page
4/16
BLOCK DIAGRAM
ASIC CN1
TFT Timing Generator
DATA
Source Driver CN2
1024 x (RGB) Gate Driver DC/DC Converter VDD VSS
768
TFT Panel
Back Light Vcom FLCN1 Lamp Lamp
FLCN2
Lamp Lamp
FLCN3
Lamp Lamp
FLCN4
Lamp Lamp
FLCN5
LGND
Tottori SANYO Electric Co., Ltd.
TM150XG-76N08
Ver.1 Page
5/16
RELATIONSHIP BETWEEN INPUT DATA AND DISPLAY POSITION
ODD RG 1,1 2,1 3,1
. . .
B
EVEN RGB 1,2 2,2 1,3
RED GREEN BLUE ODD : RA0-7, GA0-7, BA0-7 EVEN : RB0-7, GB0-7, BB0-7 ........ 1,1023 1,1024 2,1024
.
Vp,Hp
RGB
. .
767,1 768,1
768,2
..........
768,1023
767,1024 768,1024
INTERFACE PIN CONNECTIONS LCM : CN1
PIN NO.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
SYMBOL
TEST VSS RB7 RB6 RB5 RB4 VSS RB3 RB2 RB1 RB0 VSS GB7 GB6 GB5 GB4 VSS GB3 GB2 GB1 GB0 VSS BB7 BB6 BB5 BB4 VSS BB3 BB2 BB1 BB0 VSS VSYNC HSYNC DE DCLK VSS VSS VSS VSS
FUNCTION
No Connection (Should be open during operation.) Ground EVEN Red Data [MSB] EVEN Red Data EVEN Red Data EVEN Red Data Ground EVEN Red Data EVEN Red Data EVEN Red Data EVEN Red Data [LSB] Ground EVEN Green Data [MSB] EVEN Green Data EVEN Green Data EVEN Green Data Ground EVEN Green Data EVEN Green Data EVEN Green Data EVEN Green Data [LSB] Ground EVEN Blue Data [MSB] EVEN Blue Data EVEN Blue Data EVEN Blue Data Ground EVEN Blue Data EVEN Blue Data EVEN Blue Data EVEN Blue Data [LSB] Ground Vertical Synchronous Signal (We don't use this signal.) Horizontal Synchronous Signal (We don't use this signal.) Data Enable Signal (Positive logic) Data Clock Signal Ground Ground Ground Ground
CN1: IL-FHR-F40S-HF (JAE)
Tottori SANYO Electric Co., Ltd.
TM150XG-76N08
Ver.1 Page
6/16
INTERFACE PIN CONNECTIONS LCM : CN2
PIN NO.
41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
SYMBOL
VSS VSS RA7 RA6 RA5 RA4 VSS RA3 RA2 RA1 RA0 VSS GA7 GA6 GA5 GA4 VSS GA3 GA2 GA1 GA0 VSS BA7 BA6 BA5 BA4 VSS BA3 BA2 BA1 BA0 VSS VDD VDD VDD VDD TEST VSS VSS NC
FUNCTION
Ground Ground ODD Red Data [MSB] ODD Red Data ODD Red Data ODD Red Data Ground ODD Red Data ODD Red Data ODD Red Data ODD Red Data [LSB] Ground ODD Green Data [MSB] ODD Green Data ODD Green Data ODD Green Data Ground ODD Green Data ODD Green Data ODD Green Data ODD Green Data [LSB] Ground ODD Blue Data [MSB] ODD Blue Data ODD Blue Data ODD Blue Data Ground ODD Blue Data ODD Blue Data ODD Blue Data ODD Blue Data [LSB] Ground Power Supply (5V +/- 0.5V) Power Supply (5V +/- 0.5V) Power Supply (5V +/- 0.5V) Power Supply (5V +/- 0.5V) No Connection (Should be open during operation.) Ground Ground No Connection (Should be open during operation.)
CN2 : IL-FHR-F40S-HF (JAE)
Backlight : FLCN1,2,3,4
PIN NO.
1 2 3
SYMBOL
H.V NC H.V High voltage for CFL No Connection High voltage for CFL
FUNCTION
FLCN1,2,3,4: BHR-03VS-1(JST) Suitable mating connector : SM02(8.0)B-BHS-1(JST)
Backlight : FLCN5
PIN NO.
1 2
SYMBOL
LGND NC Low voltage for CFL No Connection
FUNCTION
FLCN5: ZHR-2(JST) Suitable mating connector : S2B-ZR-SM3A-TF (JST)
Tottori SANYO Electric Co., Ltd.
TM150XG-76N08
Ver.1 Page
7/16
INTERNAL SIGNAL TIMING PARAMETERS (DE_MODE)
PARAMETER Frequency Width-Low Width-High DCLK Rise Time Fall Time Duty Setup Time Hold Time Rise/Fall Time Horiz. Period DE Horiz. DE Vert. Period Vert. DE Setup Time DATA Hold Time Rise/Fall Time SYMBOL fCLK tWCL tWCH trCLK tfCLK D tSI tHI tir,tif tHP tHDE tVP nVDE tSD tHD TDr MIN 30.0 5.0 5.0 (0.40) (5.0) (5.0) 525 512 780 768 (5.0) (5.0) TYP 32.5 0.50 (672) 512 806 768 MAX 40.0 (5.0) (5.0) (0.60) (5.0) 900 tHP-12 900 tVP-5 (5.0) UNIT MHz ns ns ns ns ns ns ns tCLK tCLK tHP n ns ns ns NOTE tCLK=1/fCLK
D=tCLKL/tCLK for DCLK
fv=60Hz Typ. for DCLK
[Note 1] fH (Horizontal Frequency) = 1/tHP fV (Vertical Frequency) = 1/tVP
INTERNAL SIGNAL TIMING DIAGRAM ( DE_MODE)
tir , tDr DE , RGB DATA tCLK DCLK tCLKL tSD tHD tWCL (Data: Latched at falling edge of DCLK) Invalid Data tSI DE tHI tHP tHDE Shrink tHI tSI tWCH
2.0V 0.8V
tif , tDf
2.0V 0.8V
VIHmin VILmax tfCLK
trCLK
1/2
VDD
RGB DATA
Invalid Data
tVP
1
2
------
n-1
n
nVDE
Tottori SANYO Electric Co., Ltd.
TM150XG-76N08
Ver.1 Page
8/16
RELATIONSHIP BETWEEN INPUT DATA AND DISPLAY COLOR
RED DATA INPUT DATA MSB DISPLAY R7 R6 R5 R4 R3 R2 COLOR BLACK LL LLLL RED(255) HHHHHH GREEN(255) LL LLLL BLUE(255) LL LLLL CYAN HHLLLL MAGENTA HHHHHH YELLOW HHHHHH WHITE HHHHHH BLACK LL LLLL RED(1) *LL LLLL RED(2) *LL LLLL RED(3) *LL LLLL RED(4) LL LLLH : : RED(251) *HHHHHL RED(252) HHHHHH RED(253) HHHHHH RED(254) HHHHHH RED(255) HHHHHH BLACK LL LLLL GREEN(1) * LL LLLL GREEN(2) * LL LLLL GREEN(3) * LL LLLL GREEN(4) LL LLLL : : GREEN(251) * LL LLLL GREEN(252) LL LLLL GREEN(253) LL LLLL GREEN(254) LL LLLL GREEN(255) LL LLLL BLACK LL LLLL BLUE(1) *LL LLLL BLUE(2) *LL LLLL BLUE(3) *LL LLLL BLUE(4) LL LLLL : : BLUE(251) *LL LLLL BLUE(252) LL LLLL BLUE(253) LL LLLL BLUE(254) LL LLLL BLUE(255) LL LLLL RED BASIC COLOR GREEN BLUE GREEN DATA LSB R1 R0 LL HH LL LL LL HH HH HH LL LH HL HH LL H L L H H L L L L L L L L L L L L L L L L L L L L H L H L H L L L L L L L L L L L L L L L L L L L L MSB G7 G6 LL LL HH LL HH LL HH HH LL LL LL LL LL L L L L L L L L L L H H H H H L L L L L L L L L L L L L L L L L L L L H H H H H L L L L L L L L L L G5 G4 G3 G2 L LLL L LLL HHHH L LLL HHHH L LLL HHHH HHHH L LLL L LLL L LLL L LLL L LLL : LLLL LLLL LLLL LLLL LLLL LLLL LLLL LLLL LLLL LLLH : HHHL HHHH HHHH HHHH HHHH LLLL LLLL LLLL LLLL LLLL : LLLL LLLL LLLL LLLL LLLL LSB G1 G0 LL LL HH LL HH LL HH HH LL LL LL LL LL L L L L L L L H H L H L L H H L L L L L L L L L L L L L L L L H L H L H L H L H L L L L L L L L L L BLUE DATA MSB B7 B6 B5 B4 B3 B2 LL LLLL LL LLLL LL LLLL HHHHHH HHHHHH HHHHHH LL LLLL HHHHHH LL LLLL LL LLLL LL LLLL LL LLLL LL LLLL : LLL LLL LLL LLL LLL LLL LLL LLL LLL LLL LLL LLL LLL LLL LLL LLL LLL LLL LLL LLL : LLL LLL LLL LLL LLL LLL LLL LLL LLL LLL LLL LLL LLL LLL LLL LLL LLL LLL LLL LLH : HHHHHL HHHHHH HHHHHH HHHHHH HHHHHH LSB B0 L L L H H H L H L L L L L L L L L L L L L L L L L L L L L H L H L H L H L H
B1 L L L H H H L H L L L L L L L L L L L L L L L L L L L L L L H H L H L L H H
[ Note 1 ] [ Note 2 ]
Color(n) --- 'n' indicates gray scale step. '*' Mark shows using the frame rate modulation and dithering.
Tottori SANYO Electric Co., Ltd.
TM150XG-76N08
Ver.1 Page
9/16
POWER ON/OFF SEQUENCE REQUIREMENT
Power-on
4.5V
Power-off
4.5V 0.5V
VDD
0V 0.5V
0 < t1 <25 ms
0 < t2 < 65ms 2.0V
15 ms < t3 < 200 ms
1sec < t5 0 < t4 < 20ms
I/F Input Signal
0V
0.8V
VALID DATA
2.0V 0.8V
100ms < t6 ON
0ms < t7
Lamp
(Recommend)
OFF
When the power is off, I/F Input Signal must be kept at either low level or high impedance. Power sequence for Lamp (backlight) is not specified especially, however it is recommended to consider some timing difference between I/F Input Signal as shown above. If backlight lights on before LCD starts function, or if backlight is kept on after LCD stopped function, screen may look white for a moment or abnormal image may be displayed. This is caused by variation in output signal from timing generator at I/F Input Signal on or off. It does not cause damage to liquid crystal molecule and driving circuit.
Tottori SANYO Electric Co., Ltd.
TM150XG-76N08
Ver.1 Page 10/16
PRECAUTIONS (INSTRUCTIONS FOR SAFE AND PROPER USE) 1. Instructions for safety
(1) Please do not disassemble or modify LCD module to avoid the possibility of electric shock, damage of electronic components, scratch at display surface and invasion of foreign particles. In addition, such activity may result in fire accident due to burning of electronic component. LCD module disassembled or modified by customer is out of warranty. Please be careful in handling of LCD module with broken glass. When the display glass breaks, please pay attention not to injure your fingers. The display surface has the plastic film attached, which prevents dispersion of glass pieces, however touching broken edge will injure your fingers. Also Lamp (Cold Cathode Fluorescent Lamp) is made of glass, therefore please pay attention in the same way. Please do not touch the fluid flown out of broken display glass. If the fluid should stick to hand or clothes, wipe off with soap or alcohol immediately and then wash it with water. If the fluid should get in eyes, wash eyes immediately with pure water for more than 15 minutes and then consult the doctor. Please make secure connection of Lamp connector. Please make sure that Lamp connector from LCD module is connected with output connector on inverter circuit securely. Poor connection may cause smoke or fire accident due to high voltage in circuit. If connection may not be secure, please switch off the power supply for LCD module and Lamp and then make secure connection. Please do not make connection with another connector than recommended mating connector. Lamp contains mercury inside. Please follow regulations or rules established by local autonomy at its disposal. Please be careful to electric shock. Before handling LCD module, please switch off the power supply. Since high voltage is applied to Lamp terminal, cable, connector and inverter circuit in operation mode, touching them will cause electric shock.
(2)
(3)
(4)
(5) (6)
2. Instructions for designing
(1) Mounting of LCD Please fix LCD module at all mounting flanges shown in this specification for installation onto system. The used screws should have proper dimensions. Furthermore, designing of mounting parts should be adequate so that LCD module is not putted stresses (ex. warped, twisted and pressed stress), to achieve good display quality. The stresses may cause non-uniformity even if there is no nonuniformity statically. Polarity of power supply for Lamp Please give careful consideration in designing so that each polar of cable should be connected correctly at assembling (i.e. high voltage side is connected to high voltage side and low voltage side is connected to low voltage side). Since longer Lamp cable may cause insatiable start-up of Lamp and reduction of brightness, please make cable short as much as possible.
(2)
Tottori SANYO Electric Co., Ltd.
TM150XG-76N08
Ver.1 Page 11/16
(3)
Designing of power supply circuit for Lamp Please design the circuit so that high voltage output can be kept for more than 1 second. The shorter time may not start up Lamp. The driving inverter circuit is recommended to be the type which Lamp current can be controlled. The type which voltage is controlled is not recommended, because it may cause big current under high temperature and insatiable start-up of Lamp under low temperature. Heat radiation Lamp generates heat at lighting and causes temperature rise inside system. Therefore, designing to radiate heat like radiation slits at cabinet is recommended to meet the specified operating temperature range for LCD module. Noise on power line Spike noise contained in power line causes abnormal operation of driving circuit and abnormal display. To avoid it, spike noise should be suppressed below VDD +/- 100mVp-p. (In any case, absolute maximum rating should be kept.) Power sequence Before LCD module is switched on, please make sure that power supply and input signals of system, testing equipment, etc. meet the recommended power sequence. Absolute maximum rating Absolute maximum rating specified in this specification has to be kept in any case. It shows the maximum that cannot be exceeded. Exceeding it may cause burning or non-recoverable break of electronic components in circuit. Please make system design so that absolute maximum rating is not exceeded even if ambient temperature, input signal and components are varied. Protection for power supply Please study to adapt protection for power supply against trouble of LCD module, depending on usage condition of system. Fuse installed on LCD module should be never modified. Any modification to make the function of fuse ineffective may cause burning or break of printed wiring board or other components at circuit trouble. Protection against electric shock High voltage is applied to Lamp connector, inverter circuit and Lamp at lighting. Please make design not to expose or be accessible to such high voltage parts to avoid electric shock.
(4)
(5)
(6)
(7)
(8)
(9)
(10) Protection cover and cut-off filter for ultraviolet rays When LCD module is used under severe condition like outdoor, it is recommended to use transparent protection cover over display surface to avoid scratches and invasion of dust and water. In addition, when LCD module is exposed to direct sun light for long time, use of cut-off filter for ultraviolet rays is also recommended. Please be careful not to get condensation.
3. Instructions for use and handling
(1) Protection against Static electricity C-MOS LSI and semiconductors are easily damaged by static discharge. LCD module should be handled on conductive mat by person grounded with wrist strap etc. to avoid getting static electricity. Please be careful not to generate static electricity during operation.
Tottori SANYO Electric Co., Ltd.
TM150XG-76N08
Ver.1 Page 12/16
(2)
Protection against dust and stain LCD module should be handled in circumstance as clean as possible. It is recommended to wear fingerstalls or ductless and soft gloves before handling to avoid getting dust or stain on display surface. Protection film for display surface It is recommended to remove protection film at nearly final process of assembling to avoid getting scratch or dust. To remove film, please pick up its edge with dullhead tweezers or cellophane tape at first and then remove film gradually taking more than 3 seconds. If film is removed quickly, static electricity may be generated and may damage semiconductors or electronic components. Contamination of display surface When display surface of LCD module is contaminated, please wipe the surface softly with cotton swab or clean cloth. If it is not enough, please take it away with cellophane tape or wipe the surface with cotton swab or clean cloth containing benzine. In this case, please be careful so that benzine does not get in inside of LCD module, because it may be damaged. Water drop on LCD surface Please do not leave LCD module with water drop. When the display surface gets water drop, please wipe it off with cotton swab or soft cloth immediately, otherwise display surface will be deteriorated. If water gets in inside of LCD module, circuit may be damaged. Please make sure that LCD module is not warped or twisted at installation into system. Even temporary warp or twist may be the cause for failure. Mechanical stress Please be careful not to apply strong mechanical stress like drop or shock to LCD module. Such stress may cause break of display glass and Lamp or may be the cause for failure. Pressure to display surface Please be careful not to apply strong pressure to display surface. Such pressure may cause scratches at surface or may be the cause of failure. Protection against scratch Please be careful not to hit, press or rub the display surface with hard material like tools. In addition, please do not put heavy or hard material on display surface, and do not stack LCD modules. Polarizer at front surface can be easily scratched.
(3)
(4)
(5)
(6) (7)
(8)
(9)
(10) Plugging in of connector Please be careful not to apply strong stress to connector part of LCD module at plugging in or out, because strong stress may damage the inside connection. At plugging in connector, place LCD module on the flat surface and hold the backside of connector on LCD module. Please make sure that connector is plugged in correctly. Insecure connection may be the cause for failure during operation. In addition, please be careful not to put the connecting cable between cabinet of system and LCD module at installing LCD module into system. (11) Handling of Lamp cable and FPC (Flexible Printed Circuit) Please be careful not to pull or scratch Lamp cable, because Lamp or soldered part of cable may be damaged consequently. Also FPC should not be pulled or scratched. (12) Switching off before plugging in connector Please make sure that power is switched off before plugging in connector. If power is on at plugging in or out, circuit of LCD module may be damaged. When LCD is switched on for test or inspection, please make sure that power supply and input signals of driving system meet the specified power sequence.
Tottori SANYO Electric Co., Ltd.
TM150XG-76N08
Ver.1 Page 13/16
(13) Temperature dependence of LCD display Response speed (optical response) of LCD display is dependent on temperature. Under low temperature, response speed is slower. Also brightness and chromaticity change slightly depending on temperature. (14) Slow light-up of Lamp under low temperature Under low temperature, start-up of Lamp gets difficult. (The time from switch-on to stable lighting becomes longer.) As characteristic of Lamp, operation under low temperature makes the life time shorter. To avoid this, it is recommended to operate under normal temperature. (15) Condensation LCD module may get condensation on its display surface and inside in the circumstance where temperature changes much in short time. Condensation can cause deterioration or failure. Therefore, please be careful not to get condensation. (16) Remaining of image Displaying the same pattern for long time may cause remaining of image even after changing the pattern. This is not failure but will disappear with time.
4. Instructions for storage and transportation
(1) Storage Please store LCD module in the dark place of room temperature and low humidity in original packing condition, to avoid condensation that may cause failure. Since sudden temperature change may cause condensation, please store in circumstance of stable temperature. Stacking number Since excessive weight causes deformation and damage of carton box, please stack only up to the number stated on carton box for storage and transportation. Handling Since LCD module consists of glass and precise electronic components, it will be damaged by excessive shock and drop. Therefore, please handle the carton box carefully to minimize shock at loading, reloading and transportation.
(2)
(3)
Tottori SANYO Electric Co., Ltd.
TM150XG-76N08
Ver.1 Page 14/16
Apr.2.2001
Outer Dimensions (FRONT SIDE)
19.6
308.8 0.30(Bezel Open Area) 8
5 10
6 8
10
2.336
13
2.7 6.4
10 5
5
B
4-
B
2.7 6.4
13
304.128(Active Area)
6
3.
FLCN1 212 0.30 232.7 0.30(Bezel Open Area)
35 5
Active Area Center
228.096(Active Area)
FLCN2
261.35 0.50 204 0.30
35 5
2.7
13
13
6
T
170
TA EN
105.75
VE TI
35 5
FLCN3
6
35 5 FLCN4
6.4 23 5
FLCN5
6.4 2.7
10
10
8
24.5 0.50
4
20.8
0.8
B-B CN1,2 : IL-FHR-F40S-HF(JAE) FLCN1,2,3,4 : BHR-03VS-1(JST) FLCN5 : ZHR-2(JST)
Note1:Unspecified dimension tolerances are 0.5mm.
Unit:mm
Tottori SANYO Electric Co.,Ltd.
TM150XG-76N08
Ver.1 Page
15008TXGASY-00100-B1
2.7 6.4
340 0.30 347.3 0.50
35
5 23
8
13
15/16
Apr.2.2001
Outer Dimensions (BACK SIDE)
9.5 9.5 5 10 6
27
CN2
41
10
22
80
22
10
VE TI TA EN T
28.5 CN1
40
6 99.5
72
2-2.2 Two holes for a M2.6 P-Tight screw.
72
56
56
99.5
16 10 A 6
1
51.8 1
10
6
10
A 27 103 1 109.4
19
3.5
2.7
0.8
5.8
9.5
27
Unit:mm
A-A
Tottori SANYO Electric Co.,Ltd.
TM150XG-76N08
Ver.1 Page
16/16
15008XGASY-00100-B2

▲Up To Search▲

Price & Availability of TM150XG-76N08

	To Download TM150XG-76N08 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .