|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
NEW 0.6mm Pitch Board-to-Fine-Coaxial Cable Connectors DF21 Series (7) DF21-*P-0.6SD Plug +DF21-*P-0.6SD-GND Pull-out tab DF21*P/DP-0.6PTB 1.55mm Contact wipe PCB DF21-*S-0.6V Receptacle sFeatures 1.High Interconnection Reliability Effective contact mating length of 1.55 mm, innovative bellow style contact design, built-in interlocking feature of mated connectors assures high electrical and mechanical reliability, providing needed rigidity to resist excessive twisting. Superior reliability of the termination of the fine coaxial cable is accomplished with batch soldering. 2. Shielded design Metal shell encloses the connector and makes contact with all external conductors of the fine coaxial cable permitting reliable ground connection to the board side of mated assemblies. 3. Reliable mating/unmating The connectors are self-align during mating. Optional pull-out tab permits connection and disconnection in narrow spaces. Polarized configuration prevents incorrect mating. 4. Board placement with Automatic Equipment. The upper surface provides flat area for placement of embossed tape packaged connectors with vacuum nozzles of automatic equipment. sApplications Notebook computers, liquid crystal displays (LCD), video and audio devices, medical instruments, portable devices and any other device requiring reliable connection and termination with fine pitch coaxial cable. Receptacle Flat surface for placement with Automatic Equipment Metal Hold-down (4.55) 2002.11 1 sProduct Specifications Operating temperature range -35c to 85c (Note 1) 20% to 80% -10c to 60c (Note 2) 40% to 70% (Note 2) Ratings Current rating Wire size AWG #40: 0.3 A AWG #36: 0.5 A 50 V AC Operating humidity range Storage temperature range Voltage rating Storage humidity range Item 1. Insulation resistance 2. Withstanding voltage 3. Contact resistance 4. Vibration 5. Humidity 6. Temperature cycle 7. Durability 8. Resistance to Reflow heat 9. Resistance to Soldering heat Specifications 500M ohms min. No flashover or insulation breakdown 100m ohms max. No electrical discontinuity of 1s or more. Contact resistance of 100m ohms max., insulation resistance of 50 M ohms min. Contact resistance of 100m ohms max., insulation resistance of 50 M ohms min. Contact resistance of 100m ohms max. No melting of the resin parts that will affect performance No deformation of the insulator parts affecting performance. Condition Measured at 100 V DC Conduction of 150 V AC applied for 1 minute Measured at 100 mA Frequency of 10 to 55 Hz, single amplitude of 0.75 mm, in 3 directions, 2 hours Temperature of 402c, humidity of 90% to 95%, left standing for 96 hours (-55c : 30minutes /5 to 35c : 2 to 3minutes /85c : 30minutes /5 to 35c: 2 to 3minutes ) for 5 cycles 30 cycles (mating/unmating) Reflow: at the recommended temperature profile, Solder: at a soldering iron temperature of 300c for 3 seconds Solder bond: Within 5 seconds at 270c max., Within 30 seconds at 200c min. Hand soldering: Soldering iron temperature 300C, 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. sMaterials Item Part Insulator Receptacles Contacts Metal fittings Insulator Plugs Contacts Metal shell Pull-out tab Pull-out tab Material LCP Phosphor bronze Phosphor bronze LCP Phosphor bronze Phosphor bronze Stainless steel Finish Black Gold plating Solder plating Black Gold plating Solder plating ---------Remarks UL94V-0 ------------------UL94V-0 ---------------------------- sOrdering information qReceptacles/Plug DF 21 - * P - 0.6 SD - GND 1 1 Series name 2 Number of contacts 3 Connector type S : Single-row receptacle P : Single-row plug : DF21 : 20, 30, 40 2 3 4 5 6 5 Termination section C : Crimping plug V : Straight SMT SD : Fine coaxial cable 6 Plug mounting parts GND : Metal shell-required PTB : Pull-out tab-optional 4 Contact pitch : 0.6 mm 2 sReceptacles 0.2 3.8 3.2 A B 0.4 P=0.6 P=0.6 qEmbossed Carrier Tape Dimensions 20.1 1.750.1 O1 120.1 .5 +1 .5 0 40.1 t=0.40.1 20.5 C0.1 Product name label D0.1 E0.3 O13 0.2 O21 0.8 (E+0.4) +2 0 (E+6.4)MAX 3.8 Unreeling direction [Specifications number] - * *, (* *) (51) : Embossed tape packaging (1,000 pieces per reel) Unit: mm Product No. DF21-20S-0.6V(51) DF21-30S-0.6V(51) DF21-40S-0.6V(51) CL No. 687-0001-5-51 687-0003-0-51 687-0002-8-51 Number of Contacts 20 30 40 A 15.2 21.2 27.2 B 11.4 17.4 23.4 C 11.5 14.2 20.2 28.4 40.4 D E 24 32 44 F 12.6 18.6 24.6 (Note 1) Note : One reel contains 1,000 pieces package unit. Please order by the package unit. qRecommended PCB mounting pattern B0.03 P=0.60.03 0.350.02 1.3 +0.1 0 1.6 +0.1 0 F0.05 2.30.05 2.60.05 O3302 (O80) 0.2 3 3 sPlugs A B P=0.6 Shown with optional Pull-out Tab Unit: mm Product No. DF21-20P-0.6SD DF21-30P-0.6SD DF21-40P-0.6SD CL No. 687-1500-0 687-1502-6 687-1501-3 Number of Contacts 20 30 40 A 22.5 28.5 34.5 B 11.4 17.4 23.4 C 15 21 27 Note 1: The 40 contact type is being planned. Note 2: One package unit contains 100 pieces. Please order by the package unit. qRecommended Fine Coaxial Cable Preparation C0.5 B0.15 P=0.60.1 0 -0.3 Inner conductor (Solder coating required) Pitch maintaining tape 0.4max 4.1MAX 1.1 1.0 +0.10 -0.05 2.75MIN Insulator Ground bar 00.0 0.55 -0.05 Outer shield (for individual conductor) Fine coaxial cable C0.3 1.1MIN Jacket Note Note Note Note 1: 2: 2: 3: The pitch maintaining tape can be left in place during the termination process. Use high quality tape. When using 2-conductor coaxial cable, some contact positions will not be usable. Contact nearest Hirose sales office for recommendation on specific application. Contact Hirose for Termination Procedures. 4 4.45 6.8 sMetal shell-Required for assembly of the Plug A t=0.2 1.75 7 Unit: mm Product No. DF21-20P-0.6SD-GND DF21-30P-0.6SD-GND DF21-40P-0.6SD-GND CL No. 687-2500-6 687-2502-1 687-2501-9 Number of Contacts 20 30 40 A 17.7 23.7 29.7 Note 1: One package unit contains 100 pieces. Please order by the package unit. Note 2: The metal shell is an absolutely necessary part at the time of wiring. sPull-out Tab (Optional for Plug) A 3.5 Unit: mm Product No. DF21-20P/40DP-0.6PTB DF21-30P/60DP-0.6PTB DF21-40P/80DP-0.6PTB CL No. 687-1700-0 687-1701-2 687-1702-5 Number of Contacts 20 30 40 A 20.9 26.9 32.9 Note: One package unit contains 100 pieces. Please order by the package unit. O0.6 5 BUsage Recommendations 1. Recommended Temperature Profile IR re-flow Preheating : 150c for 30 to 90 sec. Soldering : 235c5c for 10 sec max. 220cmin. for 10 to 20 sec. Temperature 250c 200c 150c 100c 240c max. 220c Preheating 50c 0c 0s 50 s 90 s Soldering 150 s Time Note 1: Up to 2 cycles of reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. Note 2: The temperature profile indicates the board surface temperature at the point of contacts with the connector terminals (for surface mounted plug assembly). 1. Recommended 2. Receptacle Recommended Manual Soldering Conditions 3. Recommended Screen Thickness 4. Board Warping 5. Cleaning Conditions 6. Plug Recommended Soldering Conditions 7. Handling and use precautions 0.15mm Maximum of 0.03 mm at the connector center section, with both ends of the connector as reference points. Refer to "Nylon Connector Use Handbook." 260c 5c within 5 sec, 200c min. within 25 sec. Soldering temperature: 290c 10c, Soldering time: within 2 sec. Soldering temperature: 290c 10C, soldering time: within 2 sec. sDO NOT mate/un-mate non-terminated plugs with non-mounted receptacles. This may lead to damage or deformation of the contacts. sDO NOT touch the exposed contacts of the receptacle with bare fingers. This may leave non-conductive film, cause corrosion or electrostatic discharge, affecting performance of the connectors or sensitive electronic components. sDO NOT apply flux to the contact terminals when hand soldering the receptacle to the board. Wicking of the flux into the electrical contact areas may lead to connection failures. 6 |
Price & Availability of DF21-20P-06SD |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |