|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
v01.0404 MICROWAVE CORPORATION HMC244G16 Features Low Insertion Loss: 0.7 dB Non-Reflective Design Integrated 2:4 TTL Decoder Single Positive Suppy: Vdd = +5V 16 Lead Hermetic SMT Package GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4.0 GHz Typical Applications The HMC244G16 is ideal for: * Telecom Infrastructure * Military Radios, Radar & ECM * Space Applications * Test Instrumentation Functional Diagram General Description The HMC244G16 is a non-reflective SP4T switch in a 16 lead glass/metal (hermetic) package. Covering DC to 4.0 GHz, the switch offers 30~50 dB isolation and a low insertion loss of 0.7 dB through 3 GHz. A 2:4 TTL/CMOS compatable decoder is integrated on the switch requiring only 2 control lines and a positive 5V bias to select each path, replacing 8 control lines normally required by GaAs SP4T switches. 14 SWITCHES - SMT Electrical Specifications, TA = +25 C, With 0/+5V Control, 50 Ohm System Parameter Frequency DC - 1.0 GHz DC - 3.0 GHz DC - 3.5 GHz DC - 4.0 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 3.0 GHz DC - 4.0 GHz "On State" DC - 3.5 GHz DC - 4.0 GHz 0.2 - 4.0 GHz 0.5 - 4.0 GHz 0.5 - 4.0 GHz 0.5 - 3.0 GHz 0.5 - 4.0 GHz 21 43 40 40 36 30 24 Min. Typ. 0.6 0.7 1.0 1.4 45 40 35 28 18 13 10 15 25 47 43 Max. 0.9 1.0 1.4 1.8 Units dB dB dB dB dB dB dB dB dB dB dB dB dBm dBm dBm Insertion Loss Isolation Return Loss Return Loss Input Power for 1 dB Compression RF 1 -4 "Off State" Input Third Order Intercept (Two-Tone Input Power = +7 dBm Each Tone) Switching Characteristics tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) DC - 4.0 GHz 40 150 ns ns 14 - 128 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v01.0404 MICROWAVE CORPORATION HMC244G16 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4.0 GHz GaAs MMIC Insertion Loss 0 SUB-HARMONICALLY Isolation MIXER 17 - 25 GHz PUMPED 0 -10 RF1 RF2 RF3 RF4 INSERTION LOSS (dB) -1 ISOLATION (dB) + 25C - 40C + 85C -20 -30 -40 -50 -60 -70 -2 -3 0 0.5 1 1.5 2 2.5 FREQUENCY (GHz) 3 3.5 4 0 0.5 1 1.5 2 2.5 FREQUENCY (GHz) 3 3.5 4 Return Loss 0 RFC RF1, RF2, RF3, RF4 ON RF1, RF2, RF3, RF4 OFF 0.1 and 1 dB Input Compression Point 30 14 1 dB COMPRESSION 0.1 dB COMPRESSION -5 RETURN LOSS (dB) 20 -15 15 -20 -25 0 0.5 1 1.5 2 2.5 FREQUENCY (GHz) 3 3.5 4 10 0.5 1 1.5 2 2.5 3 FREQUENCY (GHz) 3.5 4 Input Third Order Intercept Point 60 55 + 25C + 85C - 40C Bias Voltage & Current Vdd Range= +5.0 Vdc 10% Vdd (Vdc) +5.0 Idd (Typ) (mA) 3.0 Idd (Max) (mA) 7.0 INPUT IP3 (dBm) 50 45 40 TTL/CMOS Control Voltages State Bias Condition 0 to +0.8 Vdc @ 5 uA Typ. +2.0 to +5.0 Vdc @ 70 uA Typ. Low High 1 1.5 2 2.5 3 FREQUENCY (GHz) 3.5 4 35 30 0.5 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 14 - 129 SWITCHES - SMT -10 INPUT P1dB (dBm) 25 MICROWAVE CORPORATION v01.0404 HMC244G16 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4.0 GHz Absolute Maximum Ratings Bias Voltage Range (Port Vdd) Control Voltage Range (A & B) Channel Temperature Thermal Resistance (Insertion Loss Path) Thermal Resistance (Terminated Path) Storage Temperature Operating Temperature Maximum Input Power Vdd = +5 Vdc +7.0 Vdc -0.5V to Vdd +1 Vdc 150 C 210 C/W A Low High Low High 250 C/W -65 to +150 C -40 to +85 C +20 dBm (0.05 - 0.5 GHz) +27 dBm (0.5 - 3.5 GHz) Truth Table Control Input B Low Low High High Signal Path State RF COM to: RF1 RF2 RF3 RF4 Outline Drawing 14 SWITCHES - SMT NOTES: 1. PACKAGE MATERIAL: ALUMINA LOADED BOROSILICATE GLASS. 2. LEAD, BASE, COVER MATERIAL: KOVARTM (#7052 CORNING). 3. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN., OVER ELECTROLYTIC NICKEL 75 MICROINCHES MIN. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. TOLERANCES: .005 [0.13] UNLESS OTHERWISE SPECIFIED. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Pin Descriptions Pin Number 1, 3, 5, 10, 12, 13, 14, 16 Function Description Package bottom has exposed metal paddle that must also be connected to PCB RF ground. These pins are DC coupled and matched to 50 Ohms. Blocking capacitors are required. Supply Voltage +5.0 Vdc 10% Interface Schematic GND 2, 4, 9, 11, 15 RF4, RF3, RF2, RF1, RFC Vdd 6 7 B See truth table and control voltage table. 8 A See truth table and control voltage table. 14 - 130 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v01.0404 HMC244G16 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4.0 GHz Evaluation PCB 14 SWITCHES - SMT 14 - 131 List of Material Item J1 - J5 J6 - J8 C1 - C5 U1 PCB* Description PC Mount SMA RF Connector DC Pin 330 pF Capacitors, 0402 Pkg. HMC244G16 SP4T Switch 103137 Evaluation PCB The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and package bottom should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. * Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com |
Price & Availability of HMC244G16 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |