View MDF7C-11P-254DSA_416698.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2.54mm Pitch Bottom Entry Type Connector
MDF7 Series
sFeatures
1. Board to Board Size Freely Settable
The board to board size can be set at infinite stages, according to the header pin through type structure and the diverse header variation. The board to board size can be set at infinite stages.
Board to Board size Freely settable
2. Integrity of Parts Mounted Surface
The parts mounted surface on two boards aren't face each other, and can be oriented in the same direction.
3. Wide Variation
Single-row product, double-row product, tin plated and gold plated products are lined up. In addition, the header to correspond to the board to board size are prepared. Concerning board to board size, other products can be provided, in addition to products in this catalog. Please contact HRS company as required.
sApplications
Internal connection of telephone sets and OA/FA equipment, connection between IPM, IGBT and the board.
A247
sProduct Specifications
Rating Current rating: 3A Operating Temperature Range: -30c to +85c(Note 1) Storage Temperature Range: -10c to +60c (Note 2) Storage Humidity Range: 40% to 70%(Note 2) Voltage rating: 250V AC Operating Humidity Range: 40% to 70%
Item 1. Insulation Resistance 2. Withstanding voltage 3. Contact Resistance 5. Vibration 6. Humidity (Steady state) 7. Temperature Cycle 8. Durability (Mating/un-mating) 1000M ohms min.
Specification 500V DC 650V AC/1 minute 100mA
Condition
No flashover or insulation breakdown.
30m ohms max.
4. Single Insertion/Extraction Force MIN 0.4N(40gf), MAX 4.4N(450gf)
Measured by the square steel pin with 0.6350.002mm
No electrical discontinuity of 1s or more
Contact resistance: 30m ohms max. Insulation resistance: 500M ohms min. Contact resistance: 30m ohms max. Insulation resistance: 1000M ohms min. Contact resistance: 30m ohms max.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40c and humidity of 90% to 95%
(-55c: 30 minutes, 5 to 35c: 10 minutes (-85c: 30 minutes, 5 to 35c: 10 minutes) 5cycles Tin plating Gold plating : 30 cycles : 50 cycles
9. Resistance to Soldering heat No deformation of components affecting performance.
Flow: 250c for 10 seconds Manual soldering: 300c for 3 seconds
Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sMaterial
Product Receptacle Pin Header Part Insulator Contact Insulator Contact Material Polyamide Phosphor bronze PBT Brass Finish Black Tin plated or gold plated Main unit: Black/Locator: Gray Tin plated or gold plated Remarks
UL94V-0
-------
UL94V-0
-------
sOrdering Information
MDF7
q q Series Name e Connector Type S : Single row receptacle
- * S - 2.54 DSA
w e r t : 2.54mm r Contact Pitch t Contact type DSA: Straight through hole DS : Right Angle through hole
: MDF7
w Number of contacts : 3 to 46
D : Double row receptacle P : Single row pin header DP: Double row pin header
A248
sSingle Row Receptacle
[Specific No.] -* *, (* *) Blank :Tin plated (01) :Gold plated
Number of Contacts Part Number CL No. A B 7.62 5.08 3 MDF7- 3S-2.54DSA(**) 547-0355-0-** 12.7 10.16 5 MDF7- 5S-2.54DSA(**) 547-0112-9-** 15.24 12.7 6 MDF7- 6S-2.54DSA(**) 547-0129-1-** 17.78 15.24 7 MDF7- 7S-2.54DSA(**) 547-0135-4-** 20.32 17.78 8 MDF7- 8S-2.54DSA(**) 547-0136-7-** 22.86 20.32 9 MDF7- 9S-2.54DSA(**) 547-0137-0-** 25.4 22.86 10 MDF7-10S-2.54DSA(**) 547-0038-8-** 27.94 25.4 11 MDF7-11S-2.54DSA(**) 547-0138-2-** 30.48 27.94 12 MDF7-12S-2.54DSA(**) 547-0040-0-** 33.02 30.48 13 MDF7-13S-2.54DSA(**) 547-0139-5-** 35.56 33.02 14 MDF7-14S-2.54DSA(**) 547-0140-4-** Note: The quantity for delivery is determined per pack (100 pcs.). If
Part Number CL No. MDF7-15S-2.54DSA(**) 547-0012-4-** MDF7-16S-2.54DSA(**) 547-0141-7-** MDF7-17S-2.54DSA(**) 547-0142-0-** MDF7-18S-2.54DSA(**) 547-0013-7-** MDF7-19S-2.54DSA(**) 547-0143-2-** MDF7-20S-2.54DSA(**) 547-0051-6-** MDF7-21S-2.54DSA(**) 547-0144-5-** MDF7-22S-2.54DSA(**) 547-0145-8-** MDF7-23S-2.54DSA(**) 547-0146-0-** MDF7-24S-2.54DSA(**) 547-0147-3-** MDF7-25S-2.54DSA(**) 547-0014-0-** needed, please order the products
Unit: mm Number of Contacts A B 38.1 35.56 15 40.64 38.1 16 43.18 40.64 17 45.72 43.18 18 48.26 45.72 19 50.8 48.26 20 53.34 50.8 21 55.88 53.34 22 58.42 55.88 23 60.96 58.42 24 63.5 60.96 25 per pack.
sDouble Row Receptacle
Unit: mm Number of Contacts Part Number CL No. A B [Specific No.] -* *, (* *) (Note 2) 15.24 12.7 12 MDF7-12D-2.54DSA(**) 547-0032-1-** Blank :Gold plated (01) :Tin plated 17.78 15.24 14 MDF7-14D-2.54DSA(**) 547-0354-8-** 20.32 17.78 16 MDF7-16D-2.54DSA(**) 547-0363-9-** 25.4 22.86 20 MDF7-20D-2.54DSA(**) 547-0033-4-** 27.94 25.4 22 MDF7-22D-2.54DSA(**) 547-0246-5-** 30.48 27.94 24 MDF7-24D-2.54DSA(**) 547-0244-0-** 33.02 30.48 26 MDF7-26D-2.54DSA(**) 547-0247-8-** 38.1 35.56 30 MDF7-30D-2.54DSA(**) 547-0016-5-** 43.18 40.64 34 MDF7-34D-2.54DSA(**) 547-0227-0-** 50.8 48.26 40 MDF7-40D-2.54DSA(**) 547-0228-3-** 58.42 55.88 46 MDF7-46D-2.54DSA(**) 547-0229-6-** Note 1: A quantity for delivery is determined per pack (100 pcs.). If needed, please order the products per pack. Note 2: The MDF7 series 2-row plating specification is different from the single-row plating specification. No-specification indicates the gold plating, and (01) indicates the tin plating.
A249
sSingle Row Straight Pin Header
[Specific No.] -* *, (* *) Blank :Tin plated (01) :Gold plated
qBoard Through-hole Diameter: O1.0+0.1 +0 [without locator] [with locator]
qMDF7(Board to Board Size: 2.54 to 5.5mm)
Part Number CL No. Number of Contacts 3 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 A 7.62 12.7 15.24 B 5.08 10.16 12.7 C 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 MDF7- 3P-2.54DSA(**) 547-0220-1-** MDF7- 5P-2.54DSA(**) 547-0113-1-** MDF7- 6P-2.54DSA(**) 547-0130-0-** MDF7- 7P-2.54DSA(**) 547-0148-6-** MDF7- 8P-2.54DSA(**) 547-0149-9-** MDF7- 9P-2.54DSA(**) 547-0150-8-** MDF7-10P-2.54DSA(**) 547-0039-0-** MDF7-11P-2.54DSA(**) 547-0151-0-** MDF7-12P-2.54DSA(**) 547-0043-8-** MDF7-13P-2.54DSA(**) 547-0152-3-** MDF7-14P-2.54DSA(**) 547-0153-6-** MDF7-15P-2.54DSA(**) 547-0018-0-** MDF7-16P-2.54DSA(**) 547-0111-6-** NDF7-17P-2.54DSA(**) 547-0154-9-** MDF7-18P-2.54DSA(**) 547-0022-8-** MDF7-19P-2.54DSA(**) 547-0155-1-** MDF7-20P-2.54DSA(**) 547-0123-5-** MDF7-21P-2.54DSA(**) 547-0156-4-** MDF7-22P-2.54DSA(**) 547-0157-7-** MDF7-23P-2.54DSA(**) 547-0158-0-** MDF7-24P-2.54DSA(**) 547-0159-2-** MDF7-25P-2.54DSA(**) 547-0023-0-**
qMDF7B (Board to Board Size 2.54 to 12mm)
Part Number CL No. Number of Contacts 3 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 A 7.62 12.7 15.24 B 5.08 12.7 MDF7B- 3P-2.54DSA(**) 547-0304-0-** MDF7B- 5P-2.54DSA(**) 547-0133-9-** MDF7B- 6P-2.54DSA(**) 547-0131-3-** MDF7B- 7P-2.54DSA(**) 547-0177-4-** MDF7B- 8P-2.54DSA(**) 547-0178-7-** MDF7B- 9P-2.54DSA(**) 547-0179-0-** MDF7B-10P-2.54DSA(**) 547-0048-1-** MDF7B-11P-2.54DSA(**) 547-0047-9-** MDF7B-12P-2.54DSA(**) 547-0041-2-** MDF7B-13P-2.54DSA(**) 547-0180-9-** MDF7B-14P-2.54DSA(**) 547-0181-1-** MDF7B-15P-2.54DSA(**) 547-0024-3-** MDF7B-16P-2.54DSA(**) 547-0182-4-** MDF7B-17P-2.54DSA(**) 547-0183-7-** MSD7B-18P-2.54DSA(**) 547-0025-6-** MDF7B-19P-2.54DSA(**) 547-0184-0-** MDF7B-20P-2.54DSA(**) 547-0052-9-** MDF7B-21P-2.54DSA(**) 547-0185-2-** MDF7B-22P-2.54DSA(**) 547-0186-5-** MDF7B-23P-2.54DSA(**) 547-0066-3-** MDF7B-24P-2.54DSA(**) 547-0067-6-** MDF7B-25P-2.54DSA(**) 547-0026-9-**
Unit: mm C 16.46 16.46
10.16 16.46
17.78 15.24 20.32 17.78 22.86 20.32 25.4 27.94 22.86 25.4
17.78 15.24 16.46 20.32 17.78 16.46 22.86 20.32 16.46 25.4 27.94 22.86 16.46 25.4 16.46
30.48 27.94 33.02 30.48 35.56 33.02 38.1 40.64 35.56 38.1
30.48 27.94 16.46 33.02 30.48 16.46 35.56 33.02 16.46 38.1 40.64 35.56 16.46 38.1 16.46
43.18 40.64 45.72 43.18 48.26 45.72 50.8 53.34 48.26 50.8
43.18 40.64 16.46 45.72 43.18 16.46 48.26 45.72 16.46 50.8 53.34 48.26 16.46 50.8 16.46
55.88 53.34 58.42 55.88 60.96 58.42 63.5 60.96
55.88 53.34 16.46 58.42 55.88 16.46 60.96 58.42 16.46 63.5 60.96 16.46
Note 1: The board to board size in the above table represents the case where the 1.6mm thickness board is used. Note 2: The quantity for delivery is determined per pack (100 pcs.). If needed, please order the products per pack.
A250
qMDF7P (Board to Board Size 2.54 to 8mm)
Unit: mm Part Number MDF7P- 3P-2.54DSA(**) MDF7P- 5P-2.54DSA(**) MDF7P- 6P-2.54DSA(**) MDF7P- 7P-2.54DSA(**) MDF7P- 8P-2.54DSA(**) MDF7P- 9P-2.54DSA(**) MDF7P-11P-2.54DSA(**) MDF7P-13P-2.54DSA(**) CL No. ------- ------- ------- ------- ------- ------- ------- ------- Number of Contacts 3 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 A 7.62 12.7 B 5.08 10.16 C 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5
qMDF7C (Board to Board Size 5.08 to 15mm,with Locator)
Unit: mm Part Number MDF7C- 3P-2.54DSA(**) CL No. ------- Number of Contacts 3 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 A 7.62 12.7 B C 5.08 19.46 10.16 19.46 19.46
MDF7C- 5P-2.54DSA(**) 547-0344-4-** MDF7C- 6P-2.54DSA(**) 547-0268-8-** MDF7C- 7P-2.54DSA(**) 547-0378-6-** MDF7C- 8P-2.54DSA(**) 547-0375-8-** MDF7C- 9P-2.54DSA(**) MDF7C-10P-2.54DSA(**) MDF7C-12P-2.54DSA(**) ------- ------- -------
15.24 12.7 17.78 15.24 20.32 17.78 22.86 20.32 25.4 22.86 27.94 25.4 30.48 27.94 33.02 30.48 35.56 33.02 38.1 35.56 40.64 38.1 43.18 40.46 45.72 43.18 48.26 45.72 50.8 48.26 53.34 50.8 55.88 53.34 58.42 55.88 60.96 58.42 63.5 60.96
15.24 12.7
17.78 15.24 19.46 20.32 17.78 19.46 22.86 20.32 19.46 25.4 22.86 19.46 19.46 27.97 25.4
MDF7P-10P-2.54DSA(**) 547-0360-0-** MDF7P-12P-2.54DSA(**) 547-0345-7-** MDF7P-14P-2.54DSA(**) 547-0385-1-** MDF7P-15P-2.54DSA(**) 547-0230-5-** MDF7P-16P-2.54DSA(**) 547-0346-0-** MDF7P-17P-2.54DSA(**) MDF7P-18P-2.54DSA(**) MDF7P-20P-2.54DSA(**) MDF7P-21P-2.54DSA(**) MDF7P-22P-2.54DSA(**) MDF7P-23P-2.54DSA(**) MDF7P-24P-2.54DSA(**) ------- ------- ------- ------- ------- ------- -------
MDF7C-11P-2.54DSA(**) 547-0376-0-** MDF7C-13P-2.54DSA(**) 547-0401-6-** MDF7C-14P-2.54DSA(**) 547-0380-8-** MDF7C-15P-2.54DSA(**) MDF7C-16P-2.54DSA(**) MDF7C-17P-2.54DSA(**) ------- ------- -------
30.48 27.94 19.46 33.02 30.48 19.46 35.56 33.02 19.46 38.1 35.56 19.46 19.46 40.64 38.1
43.18 40.64 19.46 45.72 43.18 19.46 48.26 45.72 19.46 50.8 48.26 19.46 19.46 53.34 50.8
MDF7C-18P-2.54DSA(**) 547-0029-7-** MDF7C-19P-2.54DSA(**) 547-0361-3-** MDF7C-20P-2.54DSA(**) 547-0198-4-** MDF7C-21P-2.54DSA(**) MDF7C-22P-2.54DSA(**) MDF7C-23P-2.54DSA(**) MDF7C-24P-2.54DSA(**) ------- ------- ------- -------
MDF7P-19P-2.54DSA(**) 547-0347-2-**
55.88 53.34 19.46 58.42 55.88 19.46 60.96 58.42 19.46 63.5 60.96 19.46
MDF7P-25P-2.54DSA(**) 547-0348-5-**
MDF7C-25P-2.54DSA(**) 547-0305-2-**
Note 1: The board to board size in the above table represents the case where the 1.6mm thickness board is used. Note 2: A quantity for delivery is determined per pack (100 pcs.). If needed, please order the products per pack. Note 3: As for the products, which HRS No. is not indicated in the above table, we will correspond to samples, and mass-production according to your demand. Please contact HRS company, as required.
A251
sSingle-Row Right Angle Pin Header
qBoard Through-hole Diameter: O1.0+0.1 +0
[Specific No.] -* *, (* *) Blank :Tin plated (01) :Gold plated
Unit: mm Part Number CL No. Number of Contacts 5 6 7 8 9 10 11 12 13 14 15 A 12.7 B Part Number CL No. Number of Contacts 16 17 18 19 20 21 22 23 24 25 A B MDF7- 5P-2.54DS(**) 547-0160-1-** MDF7- 6P-2.54DS(**) 547-0161-4-** MDF7- 7P-2.54DS(**) 547-0162-7-** MDF7- 8P-2.54DS(**) 547-0163-0-** MDF7- 9P-2.54DS(**) 547-0164-2-** MDF7-10P-2.54DS(**) 547-0165-5-** MDF7-11P-2.54DS(**) 547-0166-8-** MDF7-12P-2.54DS(**) 547-0116-0-** MDF7-13P-2.54DS(**) 547-0167-0-** MDF7-14P-2.54DS(**) 547-0168-3-** MDF7-15P-2.54DS(**) 547-0027-1-** 10.16 MDF7-16P-2.54DS(**) 547-0169-6-** MDF7-17P-2.54DS(**) 547-0170-5-** 40.64 38.1 43.18 40.64 45.72 43.18 48.26 45.72 50.8 48.26 53.34 50.8 55.88 53.34 58.42 55.88 60.96 58.42 63.5 60.96
15.24 12.7
17.78 15.24 MDF7-18P-2.54DS(**) 547-0019-3-** 20.32 17.78 MDF7-19P-2.54DS(**) 547-0171-8-** 22.86 20.32 MD7F-20P-2.54DS(**) 547-0172-0-** 25.4 22.86 MDF7-21P-2.54DS(**) 547-0173-3-** MDF7-22P-2.54DS(**) 547-0174-6-** 27.94 25.4
30.48 27.94 MDF7-23P-2.54DS(**) 547-0175-9-** 33.02 30.48 MDF7-24P-2.54DS(**) 547-0176-1-** 35.56 33.02 MDF7-25P-2.54DS(**) 547-0028-4-** 38.1 35.56
Note: A quantity for delivery is determined per pack (100 pcs.). If needed, please order the products per pack.
BApplication Pattern and PCB mounting pattern
qWhen the single-row straight pin header is used qWhen the header with locator is used
The locator moves as the connector is inserted.
qWhen the board to board size is set to MAX
To separate clearance between the boards, the operation limit t is defined as the state where the male pin has passed through the receptacle.
qWhen the right angle pin header is used
A252
sDouble-Row Straight Pin Header
qBoard Through-hole Diameter: O1.0+0.1 +0
[Specific No.] -* *, (* *) Blank :Gold plated (01) :Tin plated
qMDF7 (Board to Board Size: 2.54 to 5.5mm)
Part Number MDF7-12DP-2.54DSA(**) MDF7-14DP-2.54DSA(**) MDF7-16DP-2.54DSA(**) MDF7-20DP-2.54DSA(**) MDF7-22DP-2.54DSA(**) MDF7-24DP-2.54DSA(**) MDF7-26DP-2.54DSA(**) MDF7-30DP-2.54DSA(**) MDF7-34DP-2.54DSA(**) MDF7-40DP-2.54DSA(**) MDF7-46DP-2.54DSA(**) Number of Contacts CL No. 12 547-0034-7-** 14 547-0365-4-** 16 547-0364-1-** 20 547-0114-4-** 22 547-0093-6-** 24 547-0250-2-** 26 547-0251-5-** 30 547-0037-5-** 34 547-0252-8-** 40 547-0253-0-** 46 547-0254-3-** A 15.24 17.78 20.32 25.4 27.94 30.48 33.02 38.1 43.18 50.8 58.42 Unit: mm B C 12.7 10 15.24 10 17.78 10 22.86 10 25.4 10 27.94 10 30.48 10 35.56 10 40.64 10 48.26 10 55.88 10
qMDF7P (Board to Board Size: 2.54 to 8mm)
Part Number MDF7P-12DP-2.54DSA(**) MDF7P-14DP-2.54DSA(**) MDF7P-16DP-2.54DSA(**) MDF7P-20DP-2.54DSA(**) MDF7P-22DP-2.54DSA(**) MDF7P-24DP-2.54DSA(**) MDF7P-26DP-2.54DSA(**) MDF7P-30DP-2.54DSA(**) MDF7P-34DP-2.54DSA(**) MDF7P-40DP-2.54DSA(**) MDF7P-46DP-2.54DSA(**) Number of Contacts CL No. 12 547-0407-2-** 14 ------- 16 547-0367-0-** 20 547-0260-6-** 22 547-0261-9-** 24 547-0262-1-** 26 547-0263-4-** 30 547-0264-7-** 34 ------- 40 ------- 46 ------- A 15.24 17.78 20.32 25.4 27.94 30.48 33.02 38.1 43.18 50.8 58.42 Unit: mm B C 12.7 12.5 15.24 12.5 17.78 12.5 22.86 12.5 25.4 12.5 27.94 12.5 30.48 12.5 35.56 12.5 40.64 12.5 48.26 12.5 55.88 12.5
Note 1: The board to board size in the above table represents the state where the 1.6mm thickness board is used. Note 2: A quantity for delivery is determined per pack (100 pcs.). If needed, please order the products per pack. Note 3: The MDF7 series 2-row plating specification is different from the single-row plating specification. No-specification indicates the gold plating, and (01) indicates the tin plating. Note 4: As for the products, which HRS No. is not indicated in the above table, we will correspond to samples, and mass-production according to your demand. Please contact HRS company, as required.
BApplication Pattern and PCB mounting pattern
qWhen the double-row straight pin header is used
BPrecautions
1. Recommended Soldering Condition sFlow Condition by Automatic Soldering Unit Soldering temperature: 2505c, Soldering time: within 2 seconds sManual Soldering Condition Soldering iron temperature: 29010c, Soldering time: within 2 seconds 2. Board Masking If the automatic soldering unit is used, block the pin header through-hole on the receptacle mounted board with the masking tape, etc., and prevent the flux pervasion. In addition, if much flux is adhered so as to affect the contact, please be sure to clean the board. 3. Cleaning Condition 4. Cautions Refer to Nylon Connector Use Hand book. sIt is impossible to fix the board to the board by the connector only. Please take actions to fix the board without using the connector. sIf the board deformation could occur due to vibration, please use the gold plating. sDon't use the connector as the top entry.
A253

▲Up To Search▲

Price & Availability of MDF7C-11P-254DSA

	To Download MDF7C-11P-254DSA Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .