 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Preliminary Data Sheet PD-20682 09/04 12CWQ10G SCHOTTKY RECTIFIER 12 Amp IF(AV) = 12Amp VR = 100V Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 s sine VF TJ @ 6 Apk, TJ = 125C (per leg) range Description/ Features Units A V A V The 12CWQ10G surface mount, center tap, Schottky rectifier series has been designed for applications requiring low forward drop and small foot prints on PC board. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection. Popular D-PAK outline Center tap configuration Small foot print, surface mountable Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Values 12 100 330 0.65 - 55 to 150 C Case Styles 12CWQ10G Base Common Cathode 4 1 Anode 2 Common Cathode 3 Anode D-PAK 1 12CWQ10G Preliminary Data Sheet PD-20682 09/04 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 12CWQ10G 100 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current * See Fig. 5 IFSM EAS IAR (Per Leg) (Per Device) 12CWQ... Units 6 12 330 110 6 1 A mJ A A Conditions 50% duty cycle @ TC = 135C, rectangular wave form Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied 5s Sine or 3s Rect. pulse TJ = 25 C, IAS = 1 Amps, L = 12 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Max. Peak One Cycle Non-Repetitive Surge Current * See Fig. 7(Per Leg) Non-Repetit. Avalanche Energy (Per Leg) Repetitive Avalanche Current(Per Leg) Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) 12CWQ... Units 0.80 0.95 0.65 0.78 0.22 4 0.47 20.68 183 5.0 V V V V mA mA V m Conditions @ 6A @ 12A @ 6A @ 12A TJ = 25 C TJ = 125 C TJ = TJ max. TJ = 25 C TJ = 125 C VR = rated VR IRM Max. Reverse Leakage Current (Per Leg) * See Fig. 2 (1) VF(TO) Threshold Voltage rt CT LS Forward Slope Resistance Typ. Junction Capacitance (Per Leg) Typical Series Inductance (Per Leg) pF nH VR = 5VDC (test signal range 100Khz to 1Mhz) 25C Measured lead to lead 5mm from package body (1) Pulse Width < 300s, Duty Cycle <2% Thermal-Mechanical Specifications Parameters TJ Tstg Max. Storage Temperature Range 12CWQ... Units C C -55 to 150 3.0 1.5 0.3 (0.01) g (oz.) D-Pak 12CWQ10G Conditions Max. Junction Temperature Range (*) -55 to 150 RthJC Max. Thermal Resistance(Per Leg) Junction to Case wt Approximate Weight Case Style Device Marking (*) dPtot dTj < 1 Rth( j-a) C/W DC operation * See Fig. 4 (Per Device) Similar to TO-252AA thermal runaway condition for a diode on its own heatsink 2 12CWQ10G Preliminary Data Sheet PD-20682 09/04 1000 100 10 1 0.1 0.01 0.001 0.0001 TJ= 150C 125C 100C 75C 50C 25C Instantaneous Forward Current - I F (A) 100 R everse Current - I R (mA) 0 10 20 30 40 50 60 70 80 90 100 Reverse Voltage - V R (V) TJ = 150C TJ = 125C 10 Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) 1000 Junction Capacitanc e - C T (pF) TJ = 25C TJ= 25C 100 1 0 0.5 1 1.5 2 2.5 3 3.5 10 0 20 40 60 80 100 Forward Voltage Drop - VFM (V) Reverse Voltage - V R(V) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) 10 T hermal Impedance Z thJC (C/W) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) 1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 P DM 0.1 Notes: S ingle Pulse (T hermal R esistanc e) 0.01 0.00001 0.0001 0.001 0.01 t1 t2 1. Duty factor D = t 1/ t 2 2. Peak T = PDM x Z thJC+ TC J 0.1 1 t 1 , Rectangular Pulse Duration (S onds) ec Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) 3 12CWQ10G Preliminary Data Sheet PD-20682 09/04 150 Allowable Case T emperature - (C) Average Power Loss - (Watts) 6 5 4 3 2 1 0 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMSLimit DC 145 DC 140 135 130 125 see note (2) S quare wave (D = 0.50) 80% Rated V R applied 120 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 Average Forward Current - I F(AV) (A) Average Forward Current - I F(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Non-Repetitive S urge Current - I FSM (A) 1000 Fig. 6 - Forward Power Loss Characteristics (Per Leg) At Any R ated Load Condition And With Rated V RRM Applied Following S urge 100 10 100 1000 10000 S quare Wave Pulse Duration - t p (microsec) Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 12CWQ10G Preliminary Data Sheet PD-20682 09/04 Outline Table 2.38 (0.09) 6.73 (0.26) 6.35 (0.25) 5.46 (0.21) 5.21 (0.20) 4 2.19 (0.08) 1.27 (0.05) 0.88 (0.03) 1.14 (0.04) 0.89 (0.03) 0.58 (0.02) 0.46 (0.02) MINIMUM RECOMMENDED FOOTPRINT 5.97 (0.24) 6.45 (0.24) 6.22 (0.24) 1.64 (0.02) 1 2 3 5.68 (0.22) 10.42 (0.41) 9.40 (0.37) 0.51 (0.02) MIN. 6.48 (0.26) 10.67 (0.42) 5.97 (0.23) 1.52 (0.06) 1.15 (0.04) 2x 1.14 (0.04) 0.76 (0.03) 2.28 (0.09) 2x 4.57 (0.18) 3x 0.89 (0.03) 0.64 (0.02) 1 2 3 4 - Anode - Cathode - Anode - Cathode 2x 2.54 (0.10) 1.65 (0.06) 2x 2.28 (0.09) 2x 0.58 (0.02) 0.46 (0.02) Base Common Cathode 4 Modified JEDEC outline TO-262AA Dimensions in millimeters and (inches) 1 Anode 2 Common Cathode 3 Anode Marking Information THIS IS A 12CWQ10G WITH LOT CODE 5K3A ASSEMBLED ON WW 12, 2000 IN ASSEMBLY LINE "A" INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE 12CWQ10G DATE CODE YEAR 0 = 2000 WEEK 12 LINE A 5 12CWQ10G Preliminary Data Sheet PD-20682 09/04 Tape & Reel Information 4.1 (0.16) 3.9 (0.15) TR 2.1 (0.83) 1.9 (0.07) 1.85 (0.07) DIA. 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.6 (0.30) 7.4 (0.29) 0.35 (0.01) 0.25 (0.01) 16.3 (0.64) 15.7 (0.62) 7.0 (0.28) 6.8 (0.26) 2.75 (0.11) 2.55 (0.10) FEED DIRECTION 12.1 (0.48) 11.9 (0.47) 2.6 (0.10) DIA. 1.5 (0.06) 4.1 (0.16) 3.9 (0.15) TRR 2.1 (0.83) 1.9 (0.07) 1.85 (0.07) DIA. 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.6 (0.30) 7.4 (0.29) 0.35 (0.01) 0.25 (0.01) 10.6 (0.42) 10.4 (0.41) 2.75 (0.11) 2.55 (0.10) 16.3 (0.64) 15.7 (0.62) FEED DIRECTION 8.1 (0.32) 7.9 (0.31) 2.6 (0.10) DIA. 1.5 (0.06) 1.85 (0.07) DIA. 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.6 (0.30) 7.4 (0.29) 4.1 (0.16) 3.9 (0.15) TRL 2.1 (0.83) 1.9 (0.07) 0.35 (0.01) 0.25 (0.01) 16.3 (0.64) 15.7 (0.62) 10.6 (0.42) 10.4 (0.41) 2.75 (0.11) 2.55 (0.10) FEED DIRECTION 8.1 (0.32) 7.9 (0.31) 2.6 (0.10) DIA. 1.5 (0.06) 13 (0.52) DIA. 22.4 (0.88) TO-252AA Tape & Reel When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 2,000 pieces per reel for TR and multiples of 3,000 pieces per reel for both TRL and TRR. 375 (14.17) DIA. MAX. 50 (1.97) DIA. 6 12CWQ10G Preliminary Data Sheet PD-20682 09/04 Ordering Information Table Device Code 12 1 C 2 W 3 Q 4 10 5 G 6 TRL 7 8 1 2 3 4 5 6 7 - Current Rating C = Common Cathode Package W = D-PAK Q = Schottky Q Series Voltage Rating: Code x 10 = VRRM (10 = 100V) Schottky Generation None = Tube (75 pieces) TR = Tape & Reel TRL = Tape & Reel (Left Oriented) TRR = Tape & Reel (Right Oriented) 8 - none = Standard Production PbF = Lead-Free Data and specifications subject to change without notice. This product has been designed for Q1O1. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 09/04 7 |
Price & Availability of 12CWQ10G
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |