|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
NJM2865 LOW DROPOUT VOLTAGE REGULATOR GENERAL DESCRIPTION The NJM2865 is a low dropout voltage regulator with ON/OFF control. Advanced Bipolar technology achieves low noise, high ripple rejection and low quiescent current. It is suitable for cellular phone, camcorder, IC decoder, camera, and other portable items. It features small SC-88A package. FEATURES High Ripple Rejection 75dB typ. (f=1kHz) Output Noise Voltage Vno=45Vrms Output capacitor with 1.0uF ceramic capacitor (Vo2.7V) Output Current Io(max.)=100mA High Precision Output Vo1.0% Low Dropout Voltage 0.10V typ. (Io=60mA) ON/OFF Control (Active High) Internal Short Circuit Current Limit Internal Thermal Overload Protection Bipolar Technology Package Outline SC88A PACKAGE OUTLINE NJM2865F3 PIN CONFIGURATION PIN FUNCTION 5 4 1.CONTROL(Active High) 2.GND 3.NC 4.VOUT 123 5.VIN NJM2865F3 EQUIVALENT CIRCUIT VIN Control Bandgap Reference Thermal Protection VOUT GND OUTPUT VOLTAGE RANK LIST Device Name VOUT NJM2865F3-21 2.1V NJM2865F3-26 2.6V NJM2865F3-29 2.9V NJM2865F3-03 3.0V NJM2865F3-33 3.3V NJM2865F3-05 5.0V NJM2865 (Ta=25C) RATINGS UNIT +14 V +14(*note 1) V 250(*note 2) mW -40 +85 C -40 +125 C (*note 1): When input voltage is less than +14V, the absolute maximum control voltage is equal to the input voltage. (*note 2): On glass epoxy board. (50x50x1.6mm) ELECTRICAL CHARACTERISTICS (VIN=Vo+1V, CIN=0.1F, Co=1.0uF: Vo2.7V (Co=2.2uF: Vo2.6V), Cp=0.01F, Ta=25C) PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. Output Voltage Vo Io=30mA -1.0% +1.0% - Quiescent Current IQ Io=0mA, expect Icont 120 180 - Quiescent Current VCONT=0V 100 IQ(OFF) - - at Control OFF Output Current Io Vo-0.3V 100 130 - Line Regulation 0.10 Vo/VIN VIN=Vo+1V Vo+6V, Io=30mA - - Load Regulation 0.03 Vo/Io Io=0 60mA - - Io=60mA 0.10 0.18 Dropout Voltage VI-O - ein=200mVrms,f=1kHz, Io=10mA, Ripple Rejection RR 75 - - Vo=3V Version Average Temperature Coefficient of Output Vo/Ta Ta=0 85C, Io=10mA 50 - - Voltage f=10Hz 80kHz, Io=10mA, Output Noise Voltage VNO 45 - - Vo=3V Version Control Voltage for 1.6 VCONT(ON) - - ON-state Control Voltage for 0.6 VCONT(OFF) - - OFF-state (*note 3): The above specification is a common specification for all output voltages. Therefore, it may be different from the individual specification for a specific output voltage. TEST CIRCUIT ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Input Voltage VIN Control Voltage VCONT Power Dissipation PD Operating Temperature Topr Storage Temperature Tstg UNIT V A nA mA %/V %/mA V dB ppm/C Vrms V V A VIN IIN VIN VOUT 0.1F 2865 IOUT V VOUT 1.0F OR 2.2F(Vo2.6V) (ceramic) A V VCONT ICONT CONTROL GND NJM2865 TYPICAL APPLICATION 1 In the case where ON/OFF Control is not required: VIN 0.1F R (0300k) VIN VOUT VOUT 1.0F OR 2.2F(Vo2.6V) (ceramic) 2865 CONTROL GND Connect control terminal to VIN terminal The quiescent current can be reduced by using a resistance "R". Instead, it increases the minimum operating voltage. For further information, please refer to Figure "Output Voltage vs. Control Voltage". 2 In use of ON/OFF CONTROL: VIN VIN VOUT VOUT 1.0F OR 2.2F(Vo2.6V) (ceramic) 0.1F R 2865 CONTROL GND State of control terminal: *"H" output is enabled. *"L" or "open" output is disabled. NJM2865 [CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. |
Price & Availability of NJM2865 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |