 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| AG201-63 InGaP HBT Gain Block The Communications Edge TM Product Information Product Features * * * * * * * DC - 6000 MHz +6.5 dBm P1dB at 900 MHz +19 dBm OIP3 at 900 MHz 11 dB Gain at 900 MHz Single Voltage Supply SOT-363 SMT Package Internally matched to 50 Product Description The AG201-63 is a general-purpose buffer amplifier that offers high dynamic range in a low-cost surface-mount package. At 900 MHz, the AG201-63 typically provides 11 dB of gain, +19 dBm Output IP3, and +6.5 dBm P1dB. The device combines dependable performance with consistent quality to maintain MTTF values exceeding 100 years at mounting temperatures of +85 C and is housed in a SOT-363 industry-standard SMT package. The AG201-63 consists of Darlington pair amplifiers using the high reliability InGaP/GaAs HBT technology process technology and only requires DC-blocking capacitors, a bias resistor, and an inductive RF choke for operation. The broadband MMIC amplifier can be directly applied to various current and next generation wireless technologies such as GPRS, GSM, CDMA, and W-CDMA. In addition, the AG201-63 will work for other various applications within the DC to 6 GHz frequency range such as CATV and fixed wireless. Functional Diagram GND 1 6 RF OUT GND GND 2 5 RF IN 3 4 GND Applications * * * * * * Mobile Infrastructure CATV / DBS W-LAN / ISM RFID Defense / Homeland Security Fixed Wireless Function Input Output/Bias Ground Pin No. 3 6 1, 2, 4, 5 Specifications Parameter Frequency Range Gain (900 MHz) Gain (1900 MHz) Input Return Loss Output Return Loss Output P1dB Output IP3 (2) Output IP2 Noise Figure Device Voltage Device Current Thermal Resistance Junction Temperature (3) Typical Performance Units MHz dB dB dB dB dBm dBm dBm dB V mA C / W C Min DC 10 Typ 900 11.3 11 25 16 +6.5 +19.1 +27 4.4 4.0 20 Max 6000 12 Parameter Frequency S21 S11 S22 Output P1dB Output IP3 Noise Figure Units MHz dB dB dB dBm dBm dB 500 11.4 -30 -16 +6.5 +19.5 4.3 Typical 900 11.3 -25 -16 +6.5 +19.1 4.4 1900 11 -20 -16 +5.8 +18.5 4.6 2140 10.9 -15 -16 +5.1 +18.2 4.6 Test conditions: T = 25C, Supply Voltage = +5 V, Rbias = 49.9 , 50 System. 410 177 Test conditions unless otherwise noted. 1. T = 25 C, Supply Voltage = +5 V, Rbias = 49.9 , Frequency = 900 MHz, 50 System. 2. 3OIP measured with two tones at an output power of -10 dBm/tone separated by 10 MHz. The suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule. 3. The junction temperature ensures a minimum MTTF rating of 1 million hours of usage. Absolute Maximum Rating Parameter Operating Case Temperature Storage Temperature DC Voltage RF Input Power (continuous) Junction Temperature -40 to +85 C -55 to +125 C +4.5 V +10 dBm +250 C Ordering Information Part No. AG201-63 AG201-63PCB Rating Description InGaP HBT Gain Block 700 - 2400 MHz Fully Assembled Eval. Board Operation of this device above any of these parameters may cause permanent damage. Specifications and information are subject to change without notice WJ Communications, Inc * Phone 1-800-WJ1-4401 * FAX: 408-577-6621 * e-mail: sales@wj.com * Web site: www.wj.com June 2003 AG201-63 InGaP HBT Gain Block Frequency S21 S11 S22 Output P1dB Output IP3 Noise Figure MHz dB dB dB dBm dBm dB 100 11.4 -30 -16 +6.5 +19.5 4.3 500 11.4 -30 -16 +6.5 +19.5 4.3 900 11.3 -25 -16 +6.5 +19.1 4.4 1900 11.0 -20 -16 +5.8 +18.5 4.6 The Communications Edge TM Product Information Typical Device RF Performance Supply Bias = +5 V, Rbias = 49.9 , Icc = 20 mA 2140 10.9 -15 -16 +5.1 +18.2 4.6 2400 10.8 -16 -16 +5.0 +17.7 4.7 3500 10.4 -18 -20 +4.1 5800 9.2 -20 -14 1. Test conditions: T = 25 C, Supply Voltage = +5 V, Device Voltage = 4.0 V, Rbias = 49.9 , Icc = 20 mA typical, 50 System. 2. 3OIP measured with two tones at an output power of -10 dBm/tone separated by 10 MHz. The suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule. 3. Data is shown as device performance only. Actual implementation for the desired frequency band will be determined by external components shown in the application circuit. Gain vs. Frequency 14 12 S11, S22 (dB) Gain (dB) 10 8 6 -40 C 4 0 1 2 Frequency (GHz) 3 4 +25 C +85 C -40 0 -10 -20 -30 Return Loss 40 Device Current (mA) 30 I-V Curve Optimal operating point 20 10 0 3.0 S11 S22 0 1 2 3 4 5 6 3.5 4.0 4.5 Frequency (GHz) Output IP2 vs. Frequency Device Voltage (V) Noise Figure vs. Frequency Output IP3 vs. Frequency 25 20 15 10 - 40 C +25 C +85 C 35 30 25 20 -40c +25c +85c 6 5 NF (dB) 4 3 2 -40 C +25 C +85 C OIP3 (dBm) OIP2 (dBm) 5 15 1 0 200 400 600 800 1000 0 0.5 1 1.5 2 2.5 3 Frequency (MHz) Output Power / Gain vs. Input Power frequency = 900 MHz 0 0.5 1 1.5 2 2.5 3 Frequency (GHz) P1dB vs. Frequency Frequency (GHz) Output Power / Gain vs. Input Power 12 8 Output Power (dBm) Gain (dB) 4 0 -4 10 8 6 4 2 Output Power -8 0 -20 -16 -12 -8 -4 Input Power (dBm) 0 4 -8 0 4 Gain frequency = 2000 MHz 10 5 0 -5 -40 C +25 C +85 C Gain (dB) 12 10 8 6 4 Gain 12 8 4 0 -4 Output Power (dBm) P1dB (dBm) -10 0 0.5 1 1.5 2 2.5 3 3.5 4 Frequency (GHz) Output Power 2 -20 -16 -12 -8 -4 Input Power (dBm) Specifications and information are subject to change without notice WJ Communications, Inc * Phone 1-800-WJ1-4401 * FAX: 408-577-6621 * e-mail: sales@wj.com * Web site: www.wj.com June 2003 AG201-63 InGaP HBT Gain Block Gain vs. Frequency 14 12 Gain (dB) 10 8 6 -40 C 4 0 1 2 Frequency (GHz) 3 4 +25 C +85 C Output IP3 vs. Frequency The Communications Edge TM Product Information Typical Device RF Performance (cont'd) Supply Bias = +6 V, Rbias = 100 , Icc = 20 mA Output IP2 vs. Frequency 25 20 15 10 -40 C +25 C +85 C 35 30 25 20 -40c +25c +85c OIP3 (dBm) 5 OIP2 (dBm) 15 0 0.5 1 1.5 2 2.5 3 0 200 400 600 800 1000 Frequency (GHz) P1dB vs. Frequency Noise Figure vs. Frequency Frequency (MHz) 10 5 0 -5 -40 C +25 C +85 C 6 5 NF (dB) 4 3 2 -40 C +25 C +85 C P1dB (dBm) -10 0 0.5 1 1.5 2 2.5 3 3.5 4 Frequency (GHz) 1 0 0.5 1 1.5 2 2.5 3 Frequency (GHz) Typical Device RF Performance Supply Bias = +8 V, Rbias = 200 , Icc = 20 mA Gain vs. Frequency 14 12 Gain (dB) 10 8 6 -40 C 4 0 1 2 Frequency (GHz) 3 4 +25 C +85 C 5 OIP3 (dBm) 25 20 15 10 -40 C +25 C +85 C Output IP3 vs. Frequency Output IP2 vs. Frequency 35 30 25 20 -40c +25c +85c OIP2 (dBm) 15 0 0.5 1 1.5 2 2.5 3 0 200 400 600 800 1000 Frequency (GHz) P1dB vs. Frequency Noise Figure vs. Frequency Frequency (MHz) 10 5 0 -5 -40 C +25 C +85 C 6 5 NF (dB) 4 3 2 -40 C +25 C +85 C P1dB (dBm) -10 0 0.5 1 1.5 2 2.5 3 3.5 4 Frequency (GHz) 1 0 0.5 1 1.5 2 2.5 3 Frequency (GHz) Specifications and information are subject to change without notice WJ Communications, Inc * Phone 1-800-WJ1-4401 * FAX: 408-577-6621 * e-mail: sales@wj.com * Web site: www.wj.com June 2003 AG201-63 InGaP HBT Gain Block Vcc Icc = 20 mA The Communications Edge TM Product Information Application Circuit R1 Bias Resistor C4 Bypass Capacitor C3 0.018 F L1 RF Choke RF IN AG201-63 C1 Blocking Capacitor C2 Blocking Capacitor RF OUT Recommended Component Values Reference Designator 50 500 L1 820 nH 220 nH C1, C2, C4 .018 F 1000 pF Ref. Desig. L1 C1, C2 C3 C4 R1 Frequency (MHz) 900 1900 2200 68 nH 27 nH 22 nH 100 pF 68 pF 68 pF Size 0603 0603 0603 0603 2500 18 nH 56 pF 3500 15 nH 39 pF 1. The proper values for the components are dependent upon the intended frequency of operation. 2. The following values are contained on the evaluation board to achieve optimal broadband performance: Value / Type 39 nH wirewound inductor 56 pF chip capacitor 0.018 F chip capacitor Do Not Place 49.9 1% tolerance Recommended Bias Resistor Values S upply R1 value S ize Voltage 5V 50 ohms 0603 6V 100 ohms 0603 7V 150 ohms 0805 8V 200 ohms 0805 9V 250 ohms 1206 10 V 300 ohms 1210 12 V 400 ohms 1210 The proper value for R1 is dependent upon the supply voltage and allows for bias stability over temperature. WJ recommends a minimum supply bias of +5 V. A 1% tolerance resistor is recommended. Specifications and information are subject to change without notice WJ Communications, Inc * Phone 1-800-WJ1-4401 * FAX: 408-577-6621 * e-mail: sales@wj.com * Web site: www.wj.com June 2003 AG201-63 InGaP HBT Gain Block The Communications Edge TM Product Information Outline Drawing Product Marking The component will be marked with an "A" designator followed by a two-digit numeric lot code on the top surface of the package. Tape and reel specifications for this part are located on the website in the "Application Notes" section. MSL / ESD Rating ESD Rating: Value: Test: Standard: ESD Rating: Value: Test: Standard: Class 0 Passes at 150 V Human Body Model (HBM) JEDEC Standard JESD22-A114 Class II Passes at 250 V Charged Device Model (CDM) JEDEC Standard JESD22-C101 MSL Rating: Level 1 Standard: JEDEC Standard J-STD-020A Mounting Config. Notes Land Pattern Specifications and information are subject to change without notice WJ Communications, Inc * Phone 1-800-WJ1-4401 * FAX: 408-577-6621 * e-mail: sales@wj.com * Web site: www.wj.com June 2003 AG201-63 InGaP HBT Gain Block The Communications Edge TM Product Information Typical Device Data S-Parameters (Vdevice = +4.0 V, ICC = 20 mA, T = 25C, calibrated to device leads) Freq (MHz) S11 (dB) S11 (ang) S21 (dB) S21 (ang) S12 (dB) S12 (ang) S22 (dB) S22 (ang) 50 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 3400 3600 3800 4000 4200 4400 4600 4800 5000 5200 5400 5600 5800 6000 -33.36 -33.08 -35.33 -32.87 -29.87 -26.66 -24.75 -23.00 -21.69 -20.76 -19.57 -16.18 -16.30 -16.72 -17.00 -17.52 -17.64 -17.98 -17.97 -17.84 -17.38 -16.96 -16.48 -16.25 -16.17 -16.06 -17.04 -17.82 -18.76 -20.10 -21.05 -6.60 22.90 89.78 91.33 76.36 74.33 72.81 65.29 61.31 59.74 56.83 42.90 41.21 40.26 41.68 42.18 45.79 46.61 48.98 52.10 54.83 56.70 55.79 55.01 54.35 51.28 46.47 39.44 32.66 20.93 8.45 11.22 11.16 11.17 11.15 11.15 11.07 11.04 11.00 10.91 10.85 10.77 10.61 10.56 10.50 10.47 10.38 10.32 10.23 10.16 10.07 9.98 9.83 9.72 9.59 9.48 9.39 9.30 9.15 9.12 9.03 8.95 178.53 174.32 168.51 162.99 157.30 151.65 145.77 140.32 134.63 129.02 123.52 118.27 113.03 109.35 104.27 98.63 93.76 88.30 82.98 77.89 72.24 66.90 61.60 56.27 51.23 45.85 40.96 36.31 31.68 26.69 21.94 -16.01 -16.37 -16.46 -16.36 -16.44 -16.67 -16.36 -16.30 -16.45 -16.43 -16.33 -16.39 -16.26 -16.40 -16.22 -16.10 -16.10 -16.18 -16.29 -16.14 -16.06 -15.99 -16.06 -15.84 -15.83 -15.85 -15.73 -15.79 -15.48 -15.43 -15.61 1.78 -1.28 -1.98 -4.64 -5.42 -10.07 -9.71 -10.75 -13.12 -14.18 -14.76 -17.26 -18.58 -23.36 -22.68 -23.33 -22.59 -25.54 -29.03 -30.12 -32.03 -34.40 -36.42 -37.44 -39.49 -42.28 -44.00 -45.12 -47.04 -49.05 -50.71 -16.22 -16.31 -18.61 -18.36 -18.77 -19.20 -19.57 -19.33 -19.32 -19.22 -19.04 -15.43 -16.03 -16.61 -17.55 -19.06 -20.99 -22.70 -23.86 -23.32 -21.23 -19.07 -17.18 -15.98 -15.01 -14.43 -14.29 -14.36 -14.58 -14.74 -14.99 -2.50 -3.86 -8.11 -12.48 -19.88 -28.63 -39.76 -50.56 -62.61 -73.38 -82.66 -85.55 -92.31 -96.34 -103.94 -113.34 -125.32 -143.10 -174.21 159.26 140.39 127.84 118.81 117.71 116.13 116.89 115.66 118.47 119.26 122.37 122.55 Device S-parameters are available for download off of the website at: http://www.wj.com Specifications and information are subject to change without notice WJ Communications, Inc * Phone 1-800-WJ1-4401 * FAX: 408-577-6621 * e-mail: sales@wj.com * Web site: www.wj.com June 2003 |
Price & Availability of AG201-63
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |