 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PRODUCT BRIEF System-IC Yaw and Acceleration Sensors (opt. for ESP) Inductive or Hall Sensor TLE 494x Inductive or Hall Sensor TLE 494x Inductive or Hall Sensor TLE 494x Inductive or Hall Sensor TLE 494x Sensor Supply TLE 4250 TLE 4251 Signal Conditioning Controller CAN, K-line 4 Low Side Switches (opt. for ESP) Valve Control Solenoid Solenoid Solenoid Solenoid Solenoid Solenoid Solenoid Solenoid Solenoid Solenoid Solenoid Solenoid 8 Low Side Switches Safety Controller 4 Channel 4 Channel 4 Channel 2 Channel TLE 7229 TLE 6217 TLE 6216 TLE 6215 Communication CAN/LIN TLE 6250; TLE 6287 +12 V Rail HS-CAN-Bus Controller Supply Supervision Warning Lamp Drivers TLE 6210/11 Pump and Valve Relay Driver Relay Pump High Side Switch BTS 6143D The TLE 6210/11G is an system-IC consisting of a 5 V voltage regulator with 800 mA current capability, different relay driver outputs and supervision logic. The design is based on Infineon`s Smart Power Technology (SPT) which allows bipolar, CMOS and power DMOS devices on the same monolithic circuit. The supervision logic watches the input voltage and the regulator output voltage both for overvoltage and undervoltage. In addition two window watchdogs supervise the correct operation of 2 independent watchdog signals, e.g. from two Microcontrollers. The TLE 6210/TLE 6211 includes 3 open drain outputs. Two drivers outputs are intended for (valve and motor) relays, while the third driver output is designed for a lamp. Power P-DSO-20-12 Applications System-IC especially for the severe conditions of ABS/ESP applications in an automotive environment Automotive and industrial applications where voltage regulator/ supervision/driver are needed Features 5 V, 800 mA linear regulator Undervoltage/overvoltage logout Undervoltage/overvoltage reset Digital watchdog supervision for two C (motor) relay driver (valve) relay driver Inverted or non inverted lamp relay driver Enable output Overtemperature and overcurrent protection P-DSO-20-12 (Power-SO) package or bare die T L E 6 2 1 0 / 11 G System-IC for Automotive and Industrial Applications Voltage Regulator/Supervision/Lamp, Motor and Valve Drivers Never stop thinking. PRODUCT BRIEF TLE 6210/11G Application Diagram TLE 6210/11 VBat UZP UST Linear Regulator USTS UST 5V Reset Detection VBat VBat UZP UVLO and OVLO Detection MR USTS Under- and Overvoltage Reset Detection RES1 To Microcontroller From Microcontroller From Microcontroller From Microcontroller From Microcontroller RES2 PGND VR Supervision Logic EN PGND VBat VBat WD1 SILA Window Watchdog WD2 PGND NSILA SIA MRA PGND Oscillator PGND Power GND Clock Supervision Charge Pump GND Logic GND UCP CCP 68 nF GND Type TLE 6210/11G Sales Code Q67007A9614/15 Application ABS/ESP Features Voltage regulator (5 V, 800 mA), Watchdog Supervision, motor, valve and lamp drivers Step up (30 V) and step down (5 V) converter, 4 squib and 2 lamp drivers, SPI Package P-DSO-20-12 TLE 6710Q Q67007A9569 Airbag P-MQFP-64-11 How to reach us: http://www.infineon.com Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81669 Munchen (c) Infineon Technologies AG 2003. All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office. Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in lifesupport devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Ordering No. B152-H8283-X-X-7600 Printed in Germany PS 09031.5 NB Template: pb_tmplt.fm/3/2003-07-01 Published by Infineon Technologies AG |
Price & Availability of TLE6710
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |