Part Number Hot Search : 
C4245 045984 HYB18 WW1TC90 KSD1362 LEM2520 HYB18 HT46R017
Product Description
Full Text Search
 

To Download ST6G3238E Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 ST6G3238E
Dual Supply Level Translator for SD/ MINISD/ T-FLASH With 8KV Contact Discharge ESD Protection
Preliminary Data
Features
HIGH SPEED: tPD = 4.4ns (Typ.) at TA = 85C VCCB = 2.7V VCCA = 1.8V LOW POWER DISSIPATION: ICCA = ICCB = 5A (MAX.) AT TA = 85C BALANCED PROPAGATION DELAYS: TPLH TPHL POWER DOWN PROTECTION ON INPUTS AND OUTPUTS 26 SERIES RESISTOR ON A SIDE EMI FILTER ON B SIDE INTEGRATED PULL-UP AND PULL-DOWN RESISTOR ON B SIDE OPERATING VOLTAGE RANGE: - VCCA (OPR) = 1.4V to VCCB - VCCB (OPR) = 1.4V to 3.6V LATCH-UP PERFORMANCE EXCEEDS 500mA (JESD17) ESD PROTECTION FOR CARD SIDE (B PORT, CD and WP pins) 8kV, IEC 61000-4-2 ESD OR CONTACT DISCHARGE: HBM > 15kV (MIL STD 883 method 3015); ESD PROTECTION FOR A-PORT: HBM > 2kV (MIL STD 883 method 3015); ROHS Compliant for TFBGA25 Package TSSOP24
TFBGA25

Description
The ST6G3238E is a dual supply low voltage CMOS Level Translator for SD/ MiniSD/ T-Flash fabricated with sub-micron silicon gate and fivelayer metal wiring C2MOS technology. Designed for use as an interface between a 3.3V bus and a 2.5V or 1.8V bus in a mixed 3.3V/1.8V, 3.3V/2.5V and 2.5V/1.8V supply systems, it achieves high speed operation while maintaining the CMOS low power dissipation. The A port is designed to track VCCA. The B port is designed to track VCCB. This device is intended for two-way asynchronous communication between data buses and the direction of data transmission is determined by CMD-dir/ DATA0-dir/ DAT123-dir inputs. The Bport interfaces with the 3V bus, the A-port with the 2.5V and 1.8V bus. All inputs are equipped with protection circuits against static discharge, giving them 2kV (on Aside except CD and WP pins) and 15kV on (B side, CD and WP pins) ESD immunity and transient excess voltage. See the section on integrated ESD protections and resistors for more information.

Order Codes
Part Number ST6G3238E ST6G3238E December 2005
This is preliminary information on a new product in development or undergoing evaluation. Details are subject to change without notice.
Package TSSOP24 TFBGA25
Tape and Reel ST6G3238ETTR ST6G3238ETBR Rev. 1 1/17
www.st.com 17
ST6G3238E
Contents
1 2 Logic Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pin Connection and Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Pins Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3 4 5 6 7 8 9
Summary Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Maximum Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 DC and AC Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 I/O and Test Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Mechanical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2/17
ST6G3238E
1 Logic Diagram
1
Figure 1.
Logic Diagram
Block Diagram
VCCB
R9 R10 R11 R12
A-SIDE
CMD-dir
R2
B-SIDE
CMD.h CMD
DATA0-dir
R3
DAT0.h DAT123-dir DAT1.h
R5 R4
DAT0
DAT1 DAT2
R6
DAT2.h DAT3.h CLK.h CLK-f
R7 R1
DAT3
CLK
VCCA
R13
R14
WP CD
GND
GND
V
Table 1.
Integrated ESD protection and resistor on B-Side
Resistors Value 40 20% 70k 15k 470k 30% Bi-directional Zener diodes Vbr min. Line capacitance 14V @ 1mA < 20 pF
R1, R2, R3, R4, R5, R6 Tolerance R10, R11, R12 R9 R7 Tolerance
Table 2.
Integrated pull-up resistors on WP and CD pins on A-Side
Resistors R13 R14 Tolerance Value 100k 100k 30%
3/17
2 Pin Connection and Function
ST6G3238E
2
Figure 2.
Pin Connection and Function
Pin Connection (top through view for TFBGA and TSSOP)
1 A B C D E
2
3
4
5
DAT0-dir VCCA CMD-dir CMD.h DAT0.h DAT1.h DAT2.h DAT3.h CLK-f
1 2 3 4 5 6 7 8 9 10 11 12
24 23 22 21 20 19 18 17 16 15 14 13
VCCB
CD
CMD
DAT0 DAT1 DAT2 DAT3 CLK WP DAT123-dir GND NC
TFBGA25
CLK.h GND NC
TSSOP24
1 A B C D E
DAT2.h DAT3.h CLK.h DAT0.h DAT1.h
2
CMDdir NC NC CMD.h CLK-f
3
DAT0. dir VCCA GND CD DAT12 3-dir
4
NC VCCB GND CMD WP
5
DAT2 DAT3 CLK DAT0 DAT1
TFBGA25
4/17
ST6G3238E
2 Pin Connection and Function
2.1
Pin Function

CMD, Command is a bi-directional line. The host and card drivers are operating in pushpull. DAT0-3, Data lines are bi-directional lines. The host and the card drivers are operating in push-pull mode. CLK, Clock is a host to card signal. CLK operates in push-pull mode. Feedback (return) Clock is feedback clock signal from level shifter to host for controlling delays. CD, Card detect, pulls HIGH state of input to VCCA. This pin is protected against ESD up to 8kV contact. WP, Write protect, pulls HIGH state of input to VCCA. This pin is protected against ESD up to 8kV contact.
Table 3.
Pin Description
Type I I/O I/O I I/O I/O I I/O I/O I/O I/O I/O I/O I O O Side A-side A-side B-Side A-Side A-Side B-Side A-Side A-Side A-Side A-Side B-Side B-Side B-Side A-Side B-Side A-Side A-Side A-Side A-Side B-Side Symbol CMD-dir CMD.h CMD DAT0-dir DAT0.h DAT0 Name and Function Command direction HIGH = A to B LOW = B to A A-side Command B-side Command Data Direction HIGH = A to B (write) LOW = B to A (read) Data Input / Output Data Input / Output
TFBGA Pin N TSSOP Pin N A2 D2 D4 A3 D1 D5 E3 E1 A1 B1 E5 A5 B5 C1 C5 E2 D3 E4 B3 B4 C3, C4 A4, B2, C2 3 4 22 1 5 21 15 6 7 8 20 19 18 10 17 9 23 16 2 24 11, 14 12, 13
Data Direction DAT123-dir HIGH = A to B (write) LOW = B to A (read) DAT1.h DAT2.h DAT3.h DAT1 DAT2 DAT3 CLK.h CLK CLK-f CD WP VCCA VCCB GND NC Data Input / Output Data Input / Output Data Input / Output Data Input / Output Data Input / Output Data Input / Output Clock Input Clock Output Clock Feedback Card Detect Write Protect Power supply Power supply Ground (0V) No connect
5/17
3 Summary Description
ST6G3238E
3
Table 4.
Summary Description
Truth Table
Function DAT1.h DAT1 DAT2 DAT3 X X X X OUTPUT INPUT B=A A=B B=A A=B B=A A=B OUTPUT
CMD-dir DAT0-dir DAT123-dir
CMD.h
CMD
DAT0.h
DAT0
DAT2.h DAT3.h
H L X X X X
X X H L X X
X X X X H L
INPUT OUTPUT X X X X
OUTPUT INPUT X X X X
X X INPUT OUTPUT X X
X X OUTPUT INPUT X X
X X X X INPUT OUTPUT
X = Don't care; Z = High Impedance
6/17
ST6G3238E
4 Maximum Rating
4
Maximum Rating
Stressing the device above the rating listed in the "Absolute Maximum Ratings" table may cause permanent damage to the device. These are stress ratings only and operation of the device at these or any other conditions above those indicated in the Operating sections of this specification is not implied. Exposure to Absolute Maximum Rating conditions for extended periods may affect device reliability. Refer also to the STMicroelectronics SURE Program and other relevant quality documents. Table 5.
Symbol VCCA VCCB VI VI/OA VI/OB VI/OA VI/OB IIK IOK IOA IOB ICCA ICCB PD Tstg TL Supply Voltage Supply Voltage DC Input Voltage DC I/O Voltage (Output disabled) DC I/O Voltage (Output disabled) DC Output Voltage DC Output Voltage DC Input Diode Current DC Output Diode Current DC Output Current DC Output Current DC V CC or Ground Current DC V CC or Ground Current Power Dissipation Storage Temperature Lead Temperature (10 sec)
Absolute Maximum Ratings
Parameter Value -0.5 to 4.6 -0.5 to 4.6 -0.5 to 4.6 -0.5 to 4.6 -0.5 to 4.6 -0.5 to VCCA + 0.5 -0.5 to VCCB + 0.5 -20 -50 50 50 100 100 400 -65 to +150 260 Unit V V V V V V V mA mA mA mA mA mA mW C C
Table 6.
Symbol VCCA VCCB VI VI/OA VI/OB Top dt/dv
Recommended Operating Conditions
Parameter Supply Voltage Supply Voltage Input Voltage (CMD-dir/DAT0-dir/DAT123-dir) I/O Voltage I/O Voltage Operating Temperature Input Rise and Fall Time (1) Value 1.4 to V CCB 1.4 to 3.6 0 to V CCA 0 to V CCA 0 to V CCB -40 to +85 0 to 10 Unit V V V V V C ns/V
1. VIN from 0.8V to 2.0V at VCC = 3.0V
7/17
5 DC and AC Parameters
ST6G3238E
5
Table 7.
DC and AC Parameters
DC Specification
Test Conditions Value TA = 25C Min. 0.65VCCA 1.7 2.0 0.35VCCA 0.7 0.8 0.65VCCB 1.7 2.0 0.35VCCB 0.7 0.8 IOH = -100A IOH = -1 mA IOH = -2 mA IOH = -4 mA IOH = -8 mA IOL = 100A IOL = 1 mA IOL = 2 mA IOL = 4 mA IOL = 8 mA IOH = -100A IOH = -1 mA IOH = -4 mA IOH = -6 mA IOH = -8 mA 1.10 1.05 1.20 1.75 2.30 V 1.30 1.20 1.40 1.90 2.45 0.10 0.20 0.25 0.40 0.55 V V 0.65VCCB 1.7 2.0 0.35VCCB 0.7 0.8 V V Max. -40 to 85C Min. 0.65VCCA 1.7 2.0 0.35VCCA 0.7 0.8 V V Max. Unit
Symbol
Parameter
VCCA (V) 1.4-1.95
VCCB (V)
High Level Input (A port) Voltage
VIH
VCCA to 1.95-2.7 3.6 2.7-3.6 1.4-1.95 VCCA to 1.95-2.7 3.6 2.7-3.6 1.4-1.95 1.4 to VCCB 1.95-2.7 2.7-3.6
Low Level Input (A port) Voltage
VIL
High Level Input (B port) Voltage
VIH
Low Level Input (B port) Voltage
VIL
1.4-1.95 1.4 to VCCB 1.4-3.6 1.4 1.95-2.7 2.7-3.6 1.4-3.6 1.4 1.65 2.3 3 1.4-3.6 1.4 1.65 2.3 3 1.4-3.6 1.4 1.65 2.3 3
High Level (A port) Output Voltage
VOH
1.65 2.3 3 1.4-3.6 1.4
Low Level (A port) Output Voltage
VOL
1.65 2.3 3 1.4-3.6 1.4
High Level (B port) Output Voltage
VOH
1.65 2.3 3
Note:
All A-port I/Os and control inputs are powered by VCCA. All B-port I/Os are powered by VCCB.
8/17
ST6G3238E
Table 7. DC Specification
Test Conditions Symbol Parameter VCCA (V) 1.4-3.6 1.4 Low Level (B port) Output Voltage VOL 1.65 2.3 3 Input Leakage Current for Aside VCCB (V) 1.4-3.6 1.4 1.65 2.3 3 IOL = 100A IOL = 1 mA IOL = 4 mA IOL = 6 mA IOL = 8 mA VIA=VCC or GND DIR=HIGH VCD=VWP=V
CCA
5 DC and AC Parameters
Value TA = 25C Min. Max. 0.20 0.35 0.45 0.55 0.70 V -40 to 85C Min. Max. Unit
IIA
1.8
2.9
0.5
5
A
VCLK.h=VCCA VCMD= V CCB IIB Input Leakage Current for Bside VDAT0,DAT1,D AT2=VCCB VDAT3=GND DIR=LOW VCD=VWP=V
CCA
1.8
2.9
0.5
5
A
1.65 ICCA Quiescent Supply Current for A-side 1.8 1.8 3.6 1.65 Quiescent Supply Current for B-side 1.8 1.8 3.6
3.6 2.5 2.6 3.6 3.6 2.5 3.6 3.6
VIA=VCCA or GND VCD=VWP=V
CCA
0.5
5
A
DIR=HIGH VCLK.h=VCCA or GND VIB=OPEN DIR=LOW VCD=VWP=V
CCA
ICCB
0.5
5
A
IWP
WP pin input Leakage Current
1.8
3.0
VIA=VCCA or GND DIR=HIGH VWP=GND VIA=VCCA or GND DIR=HIGH VCD=GND
36
A
ICD
CD pin input Leakage Current
1.8
3.0
36
A
9/17
5 DC and AC Parameters
ST6G3238E
Table 8.
AC Electrical Characteristics (f = 1MHz, 50% duty cycle, CL = 30pF, RL = 500)
Test Condition TA = -40 to 85 C VCCA = 1.8 0.15V VCCA=1.8 0.15V VCCA=2.5 0.2V
Symbol
Parameter VCCB=2.5 0.2V Min. Max. 7.2 8.1 0.5 0.5 52 52 52 52 52 52 52 52 VCCB=2.7 0.3V Min. 1.0 1.0 Max. 6.6 7.5 0.5 0.5 52 52 52 52 VCCB=2.7 0.3V Min. 1.0 1.0 Max. 6.1
Unit
tPLH tPHL tPLH tPHL
Propagation Delay Time An to Bn Propagation Delay Time Bn to An
1.0 1.0
ns 5.0 0.5 0.5 ns ns MHz Mbps
tOSLH tOSHL Output To Output Skew Time (1)(2) tCDLH tCDHL Clock And Data Skew Time Clock fmax Data From A to B From B to A From A to B From B to A
1. Skew is defined as the absolute value of the difference between the actual propagation delay for any two outputs of the same device switching in the same direction, either HIGH or LOW ( tOSLH = | tPLHm = tPLHn |, tOSHL = | tPHLm - tPHLn | ) 2. Parameter guaranteed by design.
Table 9.
Output Slew Rate (f = 1MHz, 50% duty cycle, CL=30pF, RL=500)
Test Condition TA = -40 to 85 C
Symbol
Parameter
From
To
VCCA = 1.8V 0.15V VCCB = 3V 0.3V Min. Max. 3 3
Unit
tr tf
Rise Time Fall Time
20% 80%
80% 20%
ns ns
Table 10.
Capacitance Characteristics
Test Condition Value TA = 25 C Min. Typ. 9 17 Max. -40 to 85 C Min. Max. pF pF Unit
Symbol
Parameter
VCCB (V) open 3.3
VCCA (V) open 2.5
CINB CI/OA
Input Capacitance Input/Output Capacitance for A-SIDE Input/Output Capacitance for B-SIDE Power Dissipation Capacitance
CI/OB CPD(1)
3.3 3.3 3.3
2.5 2.5 1.8 f = 10MHz
33 29 29
pF
pF
1. CPD is defined as the value of the IC's internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average current can be obtained by the following equation. ICC(opr) - C PD x VCC x fIN + ICC/16 (per circuit)
Note:
10/17
VIA = Input I/Os including CLK.h, CMD.h, DAT0.h, DAT1.h, DAT2.h, DAT3.h = Input I/Os including CMD, DAT0, DAT1, DAT2, DAT3
VIB
ST6G3238E
6 I/O and Test Circuit
6
Figure 3.
I/O and Test Circuit
Input and Output Equivalent Circuit
Figure 4.
Test Cicuit
Table 11.
Test Values
Test Switch Open 6V 2VCC GND
tPLH, tPHL tPZL, tPLZ (VCC = 3.0 to 3.6V) tPZL, tPLZ (VCC = 2.3 to 2.7V or VCC = 1.6 to 1.95V) tPZH, tPHZ
11/17
7 Waveforms
ST6G3238E
7
Figure 5.
Waveforms
Waveform - Propagation Delay (f = 1 MHz, 50% duty cycle)
Table 12.
Waveform Symbol Value
VCC
Symbol 3.0 to 3.6V VIH VM VX VY VCC 1.5V VOL+0.3V VOL-0.3V 2.3 to 2.7V VCC VCC/2 VOL+0.15V VOL-0.15V 1.65 to 1.95V VCC VCC/2 VOL+0.15V VOL-0.15V
Note:
CL = 30pF or equivalent (includes jig and probe capacitance) RL = R1 = 500 or equivalent RT = ZOUT of pulse generator (typically 50)
12/17
ST6G3238E
8 Mechanical Data
8
Mechanical Data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second Level Interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com.
13/17
8 Mechanical Data
ST6G3238E
Table 13.
TFBGA25 Mechanical Data
Figure 6.
Package Dimensions
14/17
ST6G3238E
Table 14. TSSOP24 Mechanical Data
Dimension (mm) Dim Ref Min. A A1 A2 b C D E e H L K 6.25 0.50 0 0.19 0.09 7.70 4.3 0.65 0.05 0.90 Typ.
8 Mechanical Data
Max 1.10 0.15 0.30 0.20 790 4.50 6.50 0.70 8
Figure 7.
Package Dimensions
15/17
9 Revision History
ST6G3238E
9
Revision History
Date 14-Nov-2005 Revision 1 First Release Description of Change
16/17
ST6G3238E
9 Revision History
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners (c) 2005 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
17/17


▲Up To Search▲   

 
Price & Availability of ST6G3238E

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X