 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| INTEGRATED CIRCUITS PDIUSBP11A Universal Serial Bus Transceiver Product data Supersedes data of 1999 Jun 04 2001 Jun 12 Philips Semiconductors Philips Semiconductors Product data Universal Serial Bus transceiver PDIUSBP11A FEATURES * Complies with Universal Serial Bus specification 1.1 * Utilizes digital inputs and outputs to transmit and receive USB cable data DESCRIPTION The PDIUSBP11A is a one chip generic USB transceiver. It is designed to allow 5.0V or 3.3V programmable and standard logic to interface with the physical layer of the Universal Serial Bus. It is capable of transmitting and receiving serial data at both full speed (12Mbit/s) and low speed (1.5Mbit/s) data rates. The pinout conforms with the "Serial Interface Engine". Implementation of the Serial Interface Engine along with the USB transceiver allows the designer to make USB compatible devices with off-the-shelf logic and easily modify and update the application. The PDIUSBP11A is backward compatible to the PDIUSBP11 and allows for single-ended data interfacing. * Supports 12Mbit/s "Full Speed" and 1.5Mbit/s "Low Speed" serial data transmission * Compatible with the VHDL "Serial Interface Engine" from USB Implementers' Forum * Supports single-ended data interface * Single 3.3V supply * Available in SO-14, SSOP-14 and TSSOP-14 packages ORDERING INFORMATION TYPE NUMBER PACKAGE NAME PDIUSBP11AD PDIUSBP11ADB PDIUSBP11APW SO14 SSOP14 TSSOP14 DESCRIPTION VERSION SOT108-1 SOT337-1 SOT402-1 plastic small outline package; 14 leads; body width 3.9 mm plastic shrink small outline package; 14 leads; body width 5.3 mm plastic thin shrink small outline package; 14 leads; body width 4.4 mm PIN CONFIGURATION MODE OE# RCV VP VM SUSPND GND 1 2 3 4 5 6 7 14 13 12 11 10 9 8 VCC VMO/FSEO VPO D) D- SPEED NC FUNCTIONAL DIAGRAM OE# SPEED VMO/FSEO VPO D- D+ RCV + - VP SV00559 VM SV00560 2001 Jun 12 2 853-2008 26486 Philips Semiconductors Product data Universal Serial Bus transceiver PDIUSBP11A PIN DESCRIPTION PIN No. 3 2 1 PIN SYMBOL RCV OE# MODE I/O O I I NAME AND FUNCTION Receive data. CMOS level output for USB differential input Output Enable. Active LOW, enables the transceiver to transmit data on the bus. When not active the transceiver is in receive mode Mode. When left unconnected, a weak pull-up transistor pulls it to VCC and in this mode, the PDIUSBP11A is backward compatible to PDIUSBP11. When connected to GND, the VMO/FSEO pin takes the function of FSEO (Force SEO). Inputs to differential driver. (Outputs from SIE). MODE 0 VPO 0 0 1 1 0 0 1 1 VMO/FSEO 0 1 0 1 0 1 0 1 RESULT Logic "0" SE0# Logic "1" SEO# SE0# Logic "0" Logic "1" Illegal code 12, 13 VPO, VMO/FSEO I 1 Gated version of D- and D+. Outputs are logic "0" and logic "1". Used to detect single ended zero (SE0#), error conditions, and interconnect speed. (Inputs to SIE). VP 4, 5 VP, VM O 0 0 1 1 VM 0 1 0 1 RESULT SE0# Low Speed Full Speed Error 11, 10 6 9 14 7 D+, D- SUSPND SPEED VCC GND AI/O I I Data+, Data-. Differential data bus conforming to the Universal Serial Bus standard. Suspend. Enables a low power state while the USB bus is inactive. While the suspnd pin is active it will drive the RCV pin to a logic "0" state. Both D+ and D- are tri-stated. Edge rate control. Logic "1" operates at edge rates for "full speed". Logic "0" operates edge rates for "low speed". 3.0V to 3.6V power supply Ground reference 2001 Jun 12 3 Philips Semiconductors Product data Universal Serial Bus transceiver PDIUSBP11A RECOMMENDED OPERATING CONDITIONS LIMITS SYMBOL VCC VI VAI/O VO Tamb PARAMETER DC supply voltage DC Input voltage range DC input range for AI/Os DC output voltage range Operating ambient temperature range in free air See DC and AC characteristics per device CONDITIONS MIN. MIN 3.0 0 0 0 -40 MAX. MAX 3.6 5.5 VCC VCC +85 V V V V C UNIT ABSOLUTE MAXIMUM RATINGS1 In accordance with the Absolute Maximum Rating System (IEC 134) Voltages are referenced to GND (ground = 0V) LIMITS SYMBOL VCC Ilatchup VI VI/O VO ICC, IGND TSTO PTOT PARAMETER DC supply voltage Latchup current DC input voltage DC input voltage range for I/Os DC output voltage DC VCC or GND current Storage temperature range Power dissipation per package Note 2 VI < 0 or VI > VCC Note 2 CONDITIONS MIN -0.5 - -0.5 -0.5 -0.5 - -60 MAX +6.5 200 +5.5 VCC +0.5 VCC +0.5 100 +150 UNIT V mA V V V mA C mW NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The input and output voltage ratings may be exceeded if the input and output clamp current ratings are observed. 2001 Jun 12 4 Philips Semiconductors Product data Universal Serial Bus transceiver PDIUSBP11A DC CHARACTERISTICS (DIGITAL PINS) LIMITS SYMBOL PARAMETER TEST CONDITIONS Temp = -40C to +85C MIN INPUT LEVELS VIL VIH LOW level input voltage HIGH level input voltage - 2.0 - - 0.8 - V V TYP MAX UNIT OUTPUT LEVELS VO OL LOW level output voltage IOL = 4mA IOL = 20A IOH = 4mA IOH = 20A - - 2.4 VCC-0.1 - - - - - - 0.4 0.1 - - 5 5 V V VO OH HIGH level output voltage LEAKAGE CURRENT IL ICCS ICC Input leakage current Supply current in Suspend - - A A SUPPLY CURRENT Operating supply current - 6 15 mA DC CHARACTERISTICS (AI/O PINS) LIMITS SYMBOL PARAMETER TEST CONDITIONS Temp = -40C to +85C MIN INPUT LEVELS VDI VCM VSE VOL VOH ILO CIN ZDRV1 Differential input sensitivity Differential common mode range Single ended receiver threshold |(D+) - (D-)| Includes VDI range 0.2 0.8 0.8 - 2.5 2.0 V V V MAX UNIT OUTPUT LEVELS Static output LOW voltage Static output HIGH voltage RL of 1.5 k to 3.6V RL of 15 k to GND 0V < VIN < 3.3V Pin to GND - 2.8 0.3 3.6 10 V V A LEAKAGE CURRENT Hi-Z State data line leakage current - CAPACITANCE Transceiver capacitance - 20 pF OUTPUT RESISTANCE Driver output resistance Steady state drive 6 18 NOTE: 1. Excludes external resistor. In order to comply with USB Specifications 1.1, external series resistors of 24 1% each on D+ and D- are recommended. 2001 Jun 12 5 Philips Semiconductors Product data Universal Serial Bus transceiver PDIUSBP11A AC CHARACTERISTICS (AI/O PINS. FULL SPEED) LIMITS SYMBOL PARAMETER TEST CONDITIONS CL = 50pF; Rpu = 1.5k on D+ to VCC Between 10% and 90% Waveform 1 Waveform 1 (tR/tF) 41 41 90 1.3 Waveform 2 Waveform 2 Waveform 4 Waveform 4 Waveform 4 Waveform 4 Waveform 3 Waveform 3 Waveform 3 Waveform 3 20 20 111.1 2.0 18 19 13 13 17 17 16 19 8 8 ns ns % V ns ns ns ns ns ns ns ns ns ns Tamb = -40C to +85C MIN Driver Characteristics Transition Time: Rise time Fall time Rise / Fall time matching Output signal crossover voltage Driver propagation delay (VPO, VMO/FSEO to D+/D-) Driver disable delay (OE# to D+/D-) Driver enable delay (OE# to D+/D-) Receiver propagation delay (D+, D- to RCV) Single-ended receiver delay (D+, D- to VP, VM) TYP MAX UNIT tR tF tRFM VCRS tpLH tpHL tpHZ tpLZ tpZH tpZL tpLH tpHL tpLH tpHL Driver Timings Receiver Timings NOTE: 1. The 4ns specification is only for 0C to +85C. AC CHARACTERISTICS (AI/O PINS. LOW SPEED) LIMITS SYMBOL PARAMETER TEST CONDITIONS CL = 200pF and 600pF; Rpu = 1.5k on D- to VCC Between 10% and 90% CL = 200pF. Waveform 1 CL = 600pF. Waveform 1 CL = 200pF. Waveform 1 CL = 600pF. Waveform 1 (tLR/tLF) 75 300 75 300 80 1.3 Waveform 2 Waveform 2 Waveform 4 Waveform 4 Waveform 4 Waveform 4 Waveform 3 Waveform 3 Waveform 3 Waveform 3 125 2.0 300 300 13 13 205 205 18 18 28 28 ns ns ns ns % V ns ns ns ns ns ns ns ns ns ns Tamb = -40C to +85C MIN Driver Characteristics Transition Time: tLR tLF tLRFM VLCRS Driver Timings tpLH tpHL tpHZ tpLZ tpZH tpZL tpLH tpHL tpLH tpHL Driver propagation delay (VPO, VMO/FSEO to D+/D-) Driver disable delay (OE# to D+/D-) Driver enable delay (OE# to D+/D-) Receiver propagation delay (D+, D- to RCV) Single-ended receiver delay (D+, D- to VP, VM) Rise time Fall time Rise / Fall time matching Output signal crossover voltage TYP MAX UNIT Receiver Timings 2001 Jun 12 6 Philips Semiconductors Product data Universal Serial Bus transceiver PDIUSBP11A AC WAVEFORMS VOL and VOH are the typical output voltage drops that occur with the output load. (VCC never goes below 3.0V). D+ tRISE tFALL D- VOH 90% VOL 10% 90% 10% VOL VOH 1.5V 1.5V tPLH tPHL VCR VCR 1.0V 2.0V SV00186 SV00599 Waveform 1. Rise and Fall Times Waveform 3. D+/D- to RCV, VP/VM 2.7V 1.5V GND INPUT D+ VCR D- VCR tPLH tPHL 1.5V 2.7V 1.5V 0V OE# VOH 0.5VCC VOL D+/D- VM VOL+0.3 tPZH tPZL tPHZ tPLZ VOH-0.3 0.5VCC 1.5V SV00598 SV00597 Waveform 2. VPO, VMO/FSEO to D+/D- Waveform 4. OE# to D+/D- TEST CIRCUITS AND WAVEFORMS Test Point 24 D.U.T. D.U.T. V 25pF V = 0 for tPZH, tPHZ V = VCC for tPZL, tPLZ 50pF + - Test Point 500 SV00149 SV00150 Load for VM/VP and RCV Load for Enable and Disable Times Test Point 24 D.U.T. 15k CL Test CL = 50pF, Full Speed CL = 200pF, Low Speed (Min Timing) CL = 600pF, Low Speed (Max Timing) * 1.5K on D- (Low Speed) or D+ (Full Speed) Only D-/LS D+/LS D-/FS D+/FS S1 VCC 1.5k* S1 close open open close SV01097 Load for D+/D- 2001 Jun 12 7 Philips Semiconductors Product data Universal Serial Bus transceiver PDIUSBP11A SO14: plastic small outline package; 14 leads; body width 3.9 mm SOT108-1 2001 Jun 12 8 Philips Semiconductors Product data Universal Serial Bus transceiver PDIUSBP11A SSOP14: plastic shrink small outline package; 14 leads; body width 5.3 mm SOT337-1 2001 Jun 12 9 Philips Semiconductors Product data Universal Serial Bus transceiver PDIUSBP11A TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm SOT402-1 2001 Jun 12 10 Philips Semiconductors Product data Universal Serial Bus transceiver PDIUSBP11A Data sheet status Data sheet status [1] Objective data Preliminary data Product status [2] Development Qualification Definitions This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-650A. Product data Production [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. Definitions Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support -- These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 (c) Copyright Philips Electronics North America Corporation 2001 All rights reserved. Printed in U.S.A. Date of release: 06-01 Document order number: 9397 750 08478 Philips Semiconductors 2001 Jun 12 11 |
Price & Availability of PDIUSBP11A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |