 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| IAM-91563 Surface Mount Package SOT-363 (SC-70) Pin Connections and Package Marking 91Y LO 1 GND 2 RF 3 6 IF and Vd 5 GND 4 SOURCE BYPASS Simplified Schematic IF and Vd 6 LO 1 SOURCE BYPASS RF 3 GROUND 2, 5 4 IAM-91563 Absolute Maximum Ratings Symbol Vd VRF, VLO Pin Tch TSTG Parameter Device Voltage, RF output to ground RF voltage or LO voltage to ground CW RF Input Power Channel Temperature Storage Temperature Absolute Units Maximum[1] V V dBm C C 6.0 +0.5, -1.0 +13 150 -65 to 150 Thermal Resistance[2]: ch-c = 310C/W IAM-91563 Electrical Specifications, TC = 25C, Vd = 3 V Symbol G test NFtest Id NF Parameters and Test Conditions Gain in test circuit[1] Noise Figure in test circuit[1] Device Current Noise Figure (RF & IF with external matching, IF=250 MHz, LO power=-5 dBm) f = 0.9 GHz f = 1.9 GHz f = 2.4 GHz f = 4.0 GHz f = 6.0 GHz f = 0.9 GHz f = 1.9 GHz f = 2.4 GHz f = 4.0 GHz f = 6.0 GHz f = 0.9 GHz f = 1.9 GHz f = 2.4 GHz f = 4.0 GHz f = 6.0 GHz f = 0.5 - 6.0 GHz f = 0.5 - 6.0 GHz f = 50 - 700 MHz RF = 1.9 GHz, IF = 250 MHz RF = 1.9 GHz, IF = 250 MHz RF = 1.9 GHz RF=1890 GHz, IF=250 MHz RF=1890 GHz, IF=250 MHz Units Min. Typ. Max. Std Dev[2] dB dB mA dB 6.0 4.0 9.0 8.5 9.0 7.0 8.5 11.0 16.5 18.0 11.0 9.0 7.7 4.6 1.7 -6.7 -8.0 -8.7 -15.0 -17.8 -1.7 -9.4 -3.7 -6.0 0 18 2 4 11.0 12.0 0.5 Gc Conversion gain (RF and IF with external matching, IF=250 MHz, LO power=-5 dBm) dB 1.5 P1 dB Output power @ 1 dB compression (RF and IF with external matching, IF=250 MHz, LO power =-5 dBm) dBm 1.3 RL RF RL LO RL IF IP 3 IP 3 ISOLL-R ISOLR-I ISOLL-I RF port return loss LO port return loss IF port return loss Input Third Order Intercept Point Id = 9.0 mA, LO power = -5 dBm Input Third Order Intercept Point Id = 15 mA, LO power = -2 dBm LO-RF Isolation RF-IF Isolation (No Match) LO-IF Isolation (No Match) dB dB dB dBm dBm dB dB dB 0.2 0.3 0.2 1.3 1.1 IAM-91563 Typical Performance, TC = 25C, Vd = 3.0 V, RF=1890 MHz, LO = -5 dBm, IF = 250 MHz, unless otherwise stated. 12 10 8 GAIN (dB) 6 4 2 0 0 1 2 3 4 5 6 FREQUENCY (GHz) TA = +85C TA = +25C TA = -40C 20 18 NOISE FIGURE (dB) 16 14 12 10 8 6 0 1 2 3 4 5 6 FREQUENCY (GHz) TA = +85C TA = +25C TA = -40C P1 dB (dBm) -4 -6 -8 -10 -12 -14 -16 -18 -20 0 1 2 3 4 5 6 FREQUENCY (GHz) TA = +85C TA = +25C TA = -40C Figure 1. Available Conversion Gain vs. Frequency and Temperature. Figure 2. Noise Figure (into 50 ) vs. Frequency and Temperature. Figure 3. Output Power (@ 1 dB Compression) vs. Frequency and Temperature. 12 10 8 GAIN (dB) 6 4 2 0 0 1 2 3 4 5 6 FREQUENCY (GHz) Vd = 3.3V Vd = 3.0V Vd = 2.7V 20 18 NOISE FIGURE (dB) 16 14 12 10 8 6 0 1 2 3 4 5 6 FREQUENCY (GHz) Vd = 3.3V Vd = 3.0V Vd = 2.7V P1 dB (dBm) -4 -6 -8 -10 -12 -14 -16 -18 -20 0 1 2 3 4 5 6 FREQUENCY (GHz) Vd = 3.3V Vd = 3.0V Vd = 2.7V Figure 4. Available Conversion Gain vs. Frequency and Voltage. Figure 5. Noise Figure (into 50 ) vs. Frequency and Supply Voltage. Figure 6. Output Power (@ 1 dB Compression) vs. Frequency and Voltage. 12 0 -1 RETURN LOSS (dB) RF IF -2 -3 -4 -5 -6 -7 -8 -9 -10 0 1 2 3 4 5 6 FREQUENCY (GHz) LO 12 10 8 6 4 2 0 0 1 2 3 4 5 SUPPLY VOLTAGE (V) TA = +85C TA = +25C TA = -40C SSB NOISE FIGURE (dB) DEVICE CURRENT (mA) 10 8 6 4 Vd = 3.3V Vd = 3.0V Vd = 2.7V 2 0 100 200 300 400 500 600 700 IF FREQUENCY (MHz) Figure 7. RF, LO, and IF Return Loss vs. Frequency. Figure 8. Device Current vs. Supply Voltage and Temperature. Figure 9. SSB Noise Figure vs. Frequency and Supply Voltage. IAM-91563 Typical Performance, TC = 25C, Vd = 3.0 V, RF=1890 MHz, LO = -5 dBm, IF = 250 MHz, unless otherwise stated. 12 12 12 SSB NOISE FIGURE (dB) CONVERSION GAIN (dB) 8 8 CONVERSION GAIN (dB) 10 10 10 8 6 4 TA = +85C TA = +25C TA = -40C 6 4 TA = 3.3V TA = 3.0V TA = 2.7V 6 4 TA = +85C TA = +25C TA = -40C 2 0 100 200 300 400 500 600 700 IF FREQUENCY (MHz) 2 0 100 200 300 400 500 600 700 IF FREQUENCY (MHz) 2 0 100 200 300 400 500 600 700 IF FREQUENCY (MHz) Figure 10. SSB Noise Figure vs. Frequency and Temperature. Figure 11. Conversion Gain vs. Frequency and Supply Voltage. Figure 12. Conversion Gain vs. Frequency and Temperature. 14 P1 dB and INPUT IP3 (dBm) 0 ISOLATION (dB, No Match) 0 -2 -4 -6 -8 -10 -12 -14 -16 -18 LO-RF RF-IF LO-IF NF CONVERSION GAIN and NOISE FIGURE (dB) 12 -2 IP3 -4 10 8 GAIN 6 -6 P1 dB -8 4 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 -10 -10 -20 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 LO POWER (dBm) LO POWER (dBm) RF FREQUENCY (GHz) Figure 13. Available Conversion Gain and Noise Figure vs. LO Drive Power. Figure 14. 1 dB Compression and Input 3rd Order Intercept vs. LO Drive Power. Figure 15. Isolation (LO-RF, RF-IF, LO-IF) vs. Frequency with no RF and IF Matching Networks. 0 -4 -8 ISOLATION (dB) RF-LO -12 -16 -20 -24 -28 -32 -36 -40 0 1 2 3 4 5 6 RF FREQUENCY (GHz) LO-IF RF-IF Figure 16. Isolation (RF-LO, RF-IF, LO-IF) vs. Frequency with RF and IF Matching Networks. IAM-91563 Typical Reflection Coefficients, TC = 25C, Z O = 50 , Vd = 3 V Frequency (GHz) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6 RF (Mag) RF (Ang) LO (Mag) 0.43 0.39 0.39 0.39 0.39 0.39 0.40 0.39 0.39 0.38 0.39 0.39 0.40 0.39 0.39 0.39 0.39 0.39 0.38 0.39 0.38 0.38 0.37 0.37 0.36 0.36 0.35 0.35 0.34 0.34 0.33 0.33 0.32 0.32 0.31 0.32 0.31 0.30 0.30 0.29 0.29 0.28 0.29 0.27 0.28 0.26 0.28 0.25 0.27 0.25 0.27 0.25 0.27 0.25 0.27 0.25 0.27 0.25 0.26 0.24 LO (Ang) -1 -6 -8 -9 -10 -11 -14 -14 -16 -17 -17 -19 -22 -22 -24 -25 -26 -27 -29 -29 -31 -31 -32 -33 -34 -35 -36 -36 -37 -37 -38 -39 -39 -40 -40 -42 -42 -45 -43 -46 -45 -47 -48 -49 -50 -51 -52 -52 -54 -54 -57 -56 -58 -58 -61 -61 -64 -65 -67 -65 IF (Mag) 0.64 0.63 0.63 0.63 0.62 0.62 0.62 IF (Ang) -8 -9 -10 -10 -11 -12 -13 0.91 0.91 0.91 0.92 0.91 0.88 0.87 0.85 0.84 0.83 0.82 0.82 0.81 0.81 0.81 0.81 0.81 0.80 0.80 0.81 0.81 0.81 0.82 0.83 0.83 0.83 0.85 0.86 0.87 0.85 0.83 0.83 0.82 0.83 0.83 0.84 0.84 0.84 0.85 0.84 0.85 0.85 0.85 0.86 0.85 0.84 0.84 0.84 0.83 0.83 0.81 0.81 0.80 -18 -21 -23 -25 -28 -29 -32 -33 -34 -35 -37 -37 -39 -40 -41 -42 -44 -45 -45 -46 -48 -50 -51 -53 -55 -56 -59 -61 -64 -67 -71 -71 -73 -76 -79 -82 -85 -87 -91 -95 -97 -100 -103 -106 -108 -113 -115 -117 -121 -123 -125 -128 -130 IF LO FET 2 Vd 100 pF (2) 0.5 pF Z = 110 I=10.4 mm RF 1890 MHz 220 nH Z = 50 RF FET 1 500 pF 68 nH IF 250 MHz 91 Z = 50 LO 1640 MHz 4.7 pF Figure 18. Test Circuit. Figure 17. Cascode FET Mixer. 68% 95% 99% -3 -2 -1 Mean () +1 +2 (typical) Parameter Value +3 Figure 19. Normal Distribution. REFERENCE PLANES C TEST CIRCUIT R Figure 20. Phase Reference Planes. Figure 21. RF Layout. GRF, mm = 10 log10 1 1- RF 2 (1) RF HP Filter LO IF LP Filter Figure 22. Image and IF Filters. RF Input C RF IF L LO RF IF IF Output Figure 23. RF Input HPF Matching. LO Figure 24. IF Output LPF Matching. 0 P1 dB and INPUT IP3 (dBm) -2 IP3 -4 P1 dB -6 -8 -10 Bypass Capacitor RFC RF IF Vd 7 9 11 13 15 17 19 LO IF Output DEVICE CURRENT (mA) 1000 56 21 9 5 3 Approximate Resistor Value () Figure 27. 1 dB Compression and Input 3rd Order Intercept Point vs. Device Current (Resistor). Figure 25. Bias Connection. 14 CONVERSION GAIN and NF (dB) 12 NF 10 8 GAIN 6 4 7 1000 9 11 13 15 17 19 DEVICE CURRENT (mA) 56 21 9 5 3 Approximate Resistor Value () Figure 26. Available Conversion Gain and SSB Noise Figure vs. Device Current (Source Resistor). LO Input RF Input C7 C1 91 L1 = 0 MLIN C3 L3 RFC L2 C2 C4 C5 C6 IF Output Vd Figure 29. Schematic of Example Application Circuit. LO RF IF 1 +V 0.5 A 0.2 C2 B L2 C IF Output 2 IAM-91 Figure 28. PCB Layout. 0.2 1 0.5 2 0.5 1 C 2 A B -0.2 B 0.2 -0.5 0.2 C -0.2 0.5 B A 1 C 2 -2 -1 Figure 31. IF Input Impedance Match. RF C1 Input L A -2 -1 -0.5 Figure 30. RF Input Impedance Match. Component C1 C2 C3, C5, C7 C4 L1 L2 L3 MLIN RFC Value 0.5 pF 9 pF 100 pF 500 pF (not used) 100 nH 8.2 nH Zo=90 l = 0.41 in. 320 nH (R) Table 1. Component Values for 1.9 GHz Downconverter. (IF = 110 MHz) LO C7 RF L3 C1 C3 L1 MUN 1 IF +V C6 C2 L2 C4 RFC C5 IAM-91 Figure 32. Complete 1.9 GHz Mixer. The following performance was measured for a 1.9 GHz circuit: Measured results: Conversion Gain = 9.0 dB SSB Noise Figure = 8.5 dB P1dB (output) = -8.1 dB IP3 (Input) = -7 dBm Operating conditions: RF Frequency = 1.89 GHz LO Frequency = 1.78 GHz IF Frequency = 110 MHz LO-RF Isolation = 17 dB LO-IF Isolation = 34 dB RF-IF Isolation = 23 dB LO Drive Level = -5 dBm DC Power = 3.0V @ 9 mA 100 pF Vd 0.9 pF 50 RF 900 MHz 220 pF 220 nH GC GN RF 10 nH 91 GND LO IF 80 MHz 50 1000 pF 180 nH IF 15 pF 50 LO 980 MHz Measured results: Conversion Gain = 10.6 dB SSB Noise Figure = 7.1 dB 1 dB Compression = -7.0 dB P3 (Input) = -7 dBm Operating conditions: RF Frequency = 900 MHz IF Frequency = 80 MHz LO Frequency = 980 MHz LO-RF Isolation = 21 dB LO-IF Isolation = 33 dB RF-IF Isolation = 17 dB LO Drive Level = -5 dBm DC Power = 3.0V @ 9 mA Figure 33. 800-900 MHz Cellular and ISM Band Mixer. 100 pF Vd 0.5 pF 50 RF 2450 MHz 100 pF 220 nH GC GN RF 110 , 3 mm 91 GND LO IF 250 MHz 50 500 pF 68 nH IF 4.7 pF 3.3 nH 50 LO 2200 MHz Measured results: Conversion Gain = 7.7 dB SSB Noise Figure = 11 dB 1 dB Compression = -8.7 dB IP3 (Input) = -7 dBm Operating conditions: RF Frequency = 2.45 GHz IF Frequency = 250 MHz LO Frequency = 2.2 GHz Figure 34. 2.4 GHz ISM Band Mixer. LO-RF Isolation = 16 dB LO-IF Isolation = 35 dB RF-IF Isolation = 27 dB LO Drive Level = -5 dBm DC Power = 3.0V @ 9 mA 0.026 0.075 0.035 0.016 250 TMAX TEMPERATURE (C) Figure 35. PCB Pad Layout (dimensions in inches). 200 150 Reflow Zone 100 Preheat Zone 50 0 0 60 120 180 240 300 TIME (seconds) Cool Down Zone Figure 36. Surface Mount Assembly Profile. Package Dimensions Outline 63 (SOT-363/SC-70) 1.30 (0.051) REF. PACKAGE MARKING CODE & DATE CODE 2.20 (0.087) 2.00 (0.079) 1.35 (0.053) 1.15 (0.045) Package Characteristics XXY 0.650 BSC (0.026) 2.20 (0.087) 1.80 (0.071) 0.10 (0.004) 0.00 (0.00) 0.425 (0.017) TYP. 0.30 REF. 1.00 (0.039) 0.80 (0.031) 0.25 (0.010) 0.15 (0.006) 10 0.30 (0.012) 0.10 (0.004) 0.20 (0.008) 0.10 (0.004) DIMENSIONS ARE IN MILLIMETERS (INCHES) Part Number Ordering Information Part Number IAM-91563-TR1 IAM-91563-BLK No. of Devices 3000 100 Container 7" Reel antistatic bag Tape Dimensions and Product Orientation For Outline 63 (SC-70 6 Leads) Device Orientation REEL TOP VIEW 4 mm END VIEW CARRIER TAPE USER FEED DIRECTION COVER TAPE 8 mm 91Y 91Y 91Y 91Y Tape Dimensions and Product Orientation, Continued For Outline 63 (SC-70 6Leads) P P0 D P2 Tt (COVER TAPE THICKNESS) E 5 MAX. F C W B0 D1 t1 (CARRIER TAPE THICKNESS) 8 MAX. A0 K0 DESCRIPTION CAVITY LENGTH WIDTH DEPTH PITCH BOTTOM HOLE DIAMETER DIAMETER PITCH POSITION WIDTH THICKNESS WIDTH TAPE THICKNESS CAVITY TO PERFORATION (WIDTH DIRECTION) CAVITY TO PERFORATION (LENGTH DIRECTION) SYMBOL A0 B0 K0 P D1 D P0 E W t1 C Tt F P2 SIZE (mm) 2.24 0.10 2.34 0.10 1.22 0.10 4.00 0.10 1.00 + 0.25 1.55 0.05 4.00 0.10 1.75 0.10 8.00 0.30 0.255 0.013 5.4 0.10 0.062 0.001 3.50 0.05 2.00 0.05 SIZE (INCHES) 0.088 0.004 0.092 0.004 0.048 0.004 0.157 0.004 0.039 + 0.010 0.061 0.002 0.157 0.004 0.069 0.004 0.315 0.012 0.010 0.0005 0.205 0.004 0.0025 0.00004 0.138 0.002 0.079 0.002 PERFORATION CARRIER TAPE COVER TAPE DISTANCE |
Price & Availability of IAM-91563-
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |