|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
INTEGRATED CIRCUITS 74ALVT16241 2.5V/3.3V ALVT 16-bit buffer/driver (3-State) Product specification Supersedes data of 1996 Aug 28 IC23 Data Handbook 1998 Feb 13 Philips Semiconductors Philips Semiconductors Product specification 2.5V/3.3V 16-bit buffer/driver (3-State) 74ALVT16241 * 16-bit bus interface * 5V I/O Compatible * 3-State buffers * Output capability: +64mA/-32mA * TTL input and output switching levels * Input and output interface capability to systems at 5V supply * Bus-hold data inputs eliminate the need for external pull-up * Live insertion/extraction permitted * Power-up 3-State * No bus current loading when output is tied to 5V bus * Latch-up protection exceeds 500mA per JEDEC Std 17 * ESD protection exceeds 2000V per MIL STD 883 Method 3015 and 200V per Machine Model resistors to hold unused inputs FEATURES DESCRIPTION The 74ALVT16241 is a high-performance BiCMOS product designed for VCC operation at 2.5V or 3.3V with I/O compatibility up to 5V. This device is a 16-bit buffer that is ideal for driving bus lines. The device features four Output Enables (1OE, 2OE, 3OE, 4OE), each controlling four of the 3-State outputs. QUICK REFERENCE DATA SYMBOL tPLH tPHL CIN COut ICCZ PARAMETER Propagation delay nAx to nYx Input capacitance nOE Output pin capacitance Total supply current CL = 50pF VI = 0V or VCC VI/O = 0V or VCC Outputs disabled CONDITIONS Tamb = 25C TYPICAL 2.5V 1.6 1.6 3 9 40 3.3V 1.2 1.3 3 9 70 UNIT ns pF pF A ORDERING INFORMATION PACKAGES 48-Pin Plastic SSOP Type III 48-Pin Plastic TSSOP Type II TEMPERATURE RANGE -40C to +85C -40C to +85C OUTSIDE NORTH AMERICA 74ALVT16241 DL 74ALVT16241 DGG NORTH AMERICA AV16241 DL AV16241 DGG DWG NUMBER SOT370-1 SOT362-1 LOGIC SYMBOL 47 46 44 43 1 41 40 38 37 48 1A0 1A1 1A2 1A3 1OE 2A0 2A1 2A2 2A3 2OE 2Y0 2Y1 2Y2 2Y3 1Y0 1Y1 1Y2 1Y3 2 3 5 6 36 35 33 32 25 8 9 11 12 30 29 27 26 24 3A0 3A1 3A2 3A3 3OE 4A0 4A1 4A2 4A3 4OE 4Y0 4Y1 4Y2 4Y3 3Y0 3Y1 3Y2 3Y3 13 14 16 LOGIC SYMBOL (IEEE/IEC) 1OE 2OE 3OE 4OE 1A1 17 1A2 1A3 1A4 19 20 22 23 2A1 2A2 2A3 2A4 3A1 3A2 3A3 1 48 25 24 47 46 44 43 41 1 40 38 37 36 35 33 32 30 29 27 26 1 4 1 3 2 EN1 EN2 EN3 EN4 1 1 2 3 5 6 8 9 11 12 13 14 16 17 19 20 22 23 1Y1 1Y2 1Y3 1Y4 2Y1 2Y2 2Y3 2Y4 3Y1 3Y2 3Y3 3Y4 4Y1 4Y2 4Y3 4Y4 SA00405 3A4 4A1 4A2 4A3 4A4 SA00406 1998 Feb 13 2 853-1875 18959 Philips Semiconductors Product specification 2.5V/3.3V 16-bit buffer/driver (3-State) 74ALVT16241 PIN CONFIGURATION PIN DESCRIPTION PIN NUMBER SYMBOL 1A0-1A3 2A0-2A3 3A0-3A3 4A0-4A3 1Y0-1Y3 2Y0-2Y3 3Y0-3Y3 4Y0-4Y3 1OE, 2OE, 3OE, 4OE GND VCC NAME AND FUNCTION Data inputs 47, 46, 44, 43, 41, 40, 38, 37, 36, 35, 33, 32, 30, 29, 27, 26 2, 3, 5, 6, 8, 9, 11, 12, 13, 14, 16, 17, 19, 20, 22, 23 1, 48, 25, 24 4, 10, 15, 21, 28, 34, 39, 45 7, 18, 31, 42 1OE 1Y0 1Y1 GND 1Y2 1Y3 VCC 2Y0 2Y1 GND 2Y2 2Y3 3Y0 3Y1 GND 3Y2 3Y4 VCC 4Y0 4Y1 GND 4Y2 4Y3 4OE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 2OE 1A0 1A1 GND 1A2 1A3 VCC 2A0 2A1 GND 2A2 2A3 3A0 3A1 GND 3A2 3A3 VCC 4A0 4A1 GND 4A2 4A3 3OE Data outputs Output enables Ground (0V) Positive supply voltage FUNCTION TABLE Inputs 1OE, 4OE 1Ax, 4Ax L H L L H X Inputs 2OE, 3OE 2Ax, 3Ax H H H L L X H = High voltage level L = Low voltage level X = Don't care Z = High Impedance "off " state Outputs 1Yx, 4Yx H L Z Outputs 2Yx, 3Yx H L Z SA00407 1998 Feb 13 3 Philips Semiconductors Product specification 2.5V/3.3V 16-bit buffer/driver (3-State) 74ALVT16241 ABSOLUTE MAXIMUM RATINGS1, 2 SYMBOL VCC IIK VI IOK VOUT IOUT Tstg PARAMETER DC supply voltage DC input diode current DC input voltage3 DC output diode current DC output voltage3 DC output current out ut Storage temperature range VO < 0 Output in Off or High state Output in Low state Output in High state VI < 0 CONDITIONS RATING -0.5 to +4.6 -50 -0.5 to +7.0 -50 -0.5 to +7.0 128 -64 -65 to +150 UNIT V mA V mA V mA C NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150C. 3. The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings are observed. RECOMMENDED OPERATING CONDITIONS SYMBOL VCC VI VIH VIL IOH IOL t/v Tamb DC supply voltage Input voltage High-level input voltage Input voltage High-level output current Low-level output current Low-level output current; current duty cycle 50%; f 1kHz Input transition rise or fall rate; Outputs enabled Operating free-air temperature range -40 PARAMETER 2.5V RANGE LIMITS MIN 2.3 0 1.7 0.7 -8 8 24 10 +85 -40 MAX 2.7 5.5 3.3V RANGE LIMITS MIN 3.0 0 2.0 0.8 -32 32 64 10 +85 MAX 3.6 5.5 UNIT V V V V mA mA ns/V C 1998 Feb 13 4 Philips Semiconductors Product specification 2.5V/3.3V 16-bit buffer/driver (3-State) 74ALVT16241 DC ELECTRICAL CHARACTERISTICS (3.3V "0.3V RANGE) LIMITS SYMBOL VIK VOH PARAMETER Input clamp voltage High-level out ut voltage output TEST CONDITIONS VCC = 3.0V; IIK = -18mA VCC = 3.0 to 3.6V; IOH = -100A VCC = 3.0V; IOH = -32mA VCC = 3.0V; IOL = 100A VOL Low-level out ut voltage output VCC = 3.0V; IOL = 16mA VCC = 3.0V; IOL = 32mA VCC = 3.0V; IOL = 64mA VCC = 3.6V; VI = VCC or GND II Input leakage current VCC = 0 or 3.6V; VI = 5.5V VCC = 3 6V; VI = VCC 3.6V; VCC = 3.6V; VI = 0 IOFF IHOLD Off current Bus Hold current Data inputs6 Current into an output in the High state when VO > VCC Power up/down 3-State output current3 3-State output High current 3-State output Low current Quiescent supply current Additional supply current per input pin2 VCC = 0V; VI or VO = 0 to 4.5V VCC = 3V; VI = 0.8V VCC = 3V; VI = 2.0V VCC = 0V to 3.6V; VCC = 3.6V VO = 5.5V; VCC = 3.0V VCC 1.2V; VO = 0.5V to VCC; VI = GND or VCC OE/OE = Don't care VCC = 3.6V; VO = 3.0V; VI = VIL or VIH VCC = 3.6V; VO = 0.5V; VI = VIL or VIH VCC = 3.6V; Outputs High, VI = GND or VCC, IO = 0 VCC = 3.6V; Outputs Low, VI = GND or VCC, IO = 0 VCC = 3.6V; Outputs Disabled; VI = GND or VCC, IO = VCC = 3V to 3.6V; One input at VCC-0.6V, Other inputs at VCC or GND 05 75 -75 500 10 1 0.5 0.5 0.07 3.5 0.07 0.04 125 100 5 -5 0.1 7 0.1 0.4 mA mA A A A A Data pins4 ins Control pins VCC-0.2 2.0 Temp = -40C to +85C MIN TYP1 -0.85 VCC 2.3 0.07 0.25 0.3 0.4 0.1 0.1 05 0.5 0.1 0.1 130 -140 A 0.2 0.4 0.5 0.55 1 10 1 -5 100 A A A A V MAX -1.2 V V UNIT IEX IPU/PD IOZH IOZL ICCH ICCL ICCZ ICC NOTES: 1. All typical values are at VCC = 3.3V and Tamb = 25C. 2. This is the increase in supply current for each input at the specified voltage level other than VCC or GND 3. This parameter is valid for any VCC between 0V and 1.2V with a transition time of up to 10msec. From VCC = 1.2V to VCC = 3.3V 0.3V a transition time of 100sec is permitted. This parameter is valid for Tamb = 25C only. 4. Unused pins at VCC or GND. 5. ICCZ is measured with outputs pulled up to VCC or pulled down to ground. 6. This is the bus hold overdrive current required to force the input to the opposite logic state. AC CHARACTERISTICS (3.3V "0.3V RANGE) GND = 0V; tR = tF = 2.5ns; CL = 50pF; RL = 500; Tamb = -40C to +85C. LIMITS SYMBOL tPLH tPHL tPZH tPZL tPHZ tPLZ PARAMETER Propagation delay nAx to nYx Output enable time to High and Low level Output disable time from High and Low Level WAVEFORM MIN 1 2 2 0.5 0.5 1.0 0.5 1.5 1.0 VCC = 3.3V "0.3V TYP1 1.2 1.3 2.2 1.6 2.9 2.5 MAX 1.9 2.1 3.9 2.9 5.4 4.6 ns ns ns UNIT NOTE: 1. All typical values are at VCC = 3.3V and Tamb = 25C. 1998 Feb 13 5 Philips Semiconductors Product specification 2.5V/3.3V 16-bit buffer/driver (3-State) 74ALVT16241 DC ELECTRICAL CHARACTERISTICS (2.5V "0.2V RANGE) LIMITS SYMBOL VIK VOH VOL PARAMETER Input clamp voltage High-level out ut voltage output Low-level out ut voltage output TEST CONDITIONS VCC = 2.3V; IIK = -18mA VCC = 2.3 to 3.6V; IOH = -100A VCC = 2.3V; IOH = -8mA VCC = 2.3V; IOL = 100A VCC = 2.3V; IOL = 24mA VCC = 2.7V; VI = VCC or GND II Input leakage current VCC = 0 or 2.7V; VI = 5.5V VCC = 2 7V; VI = VCC 2.7V; VCC = 2.7V; VI = 0 IOFF IHOLD IEX IPU/PD IOZH IOZL ICCH ICCL ICCZ ICC Additional supply current per input pin2 Quiescent supply current Off current Bus Hold current Data inputs6 Current into an output in the High state when VO > VCC Power up/down 3-State output current3 3-State output High current 3-State output Low current VCC = 0V; VI or VO = 0 to 4.5V VCC = 2.5V; VI = 0.7V VCC = 2.5V; VI = 1.7V VO = 5.5V; VCC = 2.3V VCC 1.2V; VO = 0.5V to VCC; VI = GND or VCC OE/OE = Don't care VCC = 2.7V; VO = 2.3V; VI = VIL or VIH VCC = 2.7V; VO = 0.5V; VI = VIL or VIH VCC = 2.7V; Outputs High, VI = GND or VCC, IO = 0 VCC = 2.7V; Outputs Low, VI = GND or VCC, IO = 0 VCC = 2.7V; Outputs Disabled; VI = GND or VCC, IO = 05 VCC = 2.3V to 2.7V; One input at VCC-0.6V, Other inputs at VCC or GND Data pins4 ins Control pins VCC-0.2 1.8 Temp = -40C to +85C MIN TYP1 -0.85 VCC 2.1 0.07 0.3 0.1 0.1 0.1 01 0.1 0.1 90 -70 10 1 0.5 0.5 0.04 2.3 0.04 0.01 125 "100 5 -5 0.1 4.5 0.1 0.4 mA mA 0.2 0.5 1 10 1 -5 "100 A A A A A A A A MAX -1.2 V V V UNIT NOTES: 1. All typical values are at VCC = 2.5V and Tamb = 25C. 2. This is the increase in supply current for each input at the specified voltage level other than VCC or GND 3. This parameter is valid for any VCC between 0V and 1.2V with a transition time of up to 10msec. From VCC = 1.2V to VCC = 2.5V 0.2V a transition time of 100sec is permitted. This parameter is valid for Tamb = 25C only. 4. Unused pins at VCC or GND. 5. ICCZ is measured with outputs pulled up to VCC or pulled down to ground. 6. Not guaranteed. AC CHARACTERISTICS (2.5V "0.2V RANGE) GND = 0V; tR = tF = 2.5ns; CL = 50pF; RL = 500; Tamb = -40C to +85C. LIMITS SYMBOL tPLH tPHL tPZH tPZL tPHZ tPLZ PARAMETER Propagation delay nAx to nYx Output enable time to High and Low level Output disable time from High and Low Level WAVEFORM MIN 1 2 2 0.5 0.5 1.5 1.0 1.0 0.5 VCC = 2.5V "0.2V TYP1 1.6 1.6 3.1 2.2 2.9 2.3 MAX 2.6 2.7 5.1 4.1 5.7 5.0 ns ns ns UNIT NOTE: 1. All typical values are at VCC = 2.5V and Tamb = 25C. 1998 Feb 13 6 Philips Semiconductors Product specification 2.5V/3.3V 16-bit buffer/driver (3-State) 74ALVT16241 AC WAVEFORMS VM = 1.5V at VCC w 3.0V; VM = VCC/2 at VCC v 2.7V VX = VOL + 0.3V at VCC w 3.0V; VX = VOL + 0.15V at VCC v 2.7V VY = VOH - 0.3V at VCC w 3.0V; VY = VOH - 0.15V at VCC v 2.7V nOE INPUT 3.0V or VCC whichever is less 3.0V or VCC, whichever is less nAx INPUT VM VM 0V tPLH tPHL VOH nOE INPUT VM VM tPZL tPLZ 3.0V or VCC nYx OUTPUT tPZH VM VX tPHZ VOL VOH VY nYx OUTPUT VM VM VOL nYx OUTPUT VM 0V SW00160 SW00209 Waveform 1. Input (nAx) to Output (nYx) Propagation Delays Waveform 2. 3-State Output Enable and Disable Times TEST CIRCUIT AND WAVEFORMS VCC 6V or VCC x 2 OPEN VIN PULSE GENERATOR RT D.U.T. CL RL POSITIVE PULSE 10% tW VOUT RL GND 90% NEGATIVE PULSE VM 10% tTHL (tF) tTLH (tR) 90% 90% VM 10% 0V 10% 0V tTLH (tR) tTHL (tF) AMP (V) tW VM 90% AMP (V) Test Circuit for 3-State Outputs VM SWITCH POSITION TEST tPHZ/tPZH tPLZ/tPZL tPLH/tPHL SWITCH GND 6V or VCC x 2 open VM = 1.5V or VCC / 2, whichever is less Input Pulse Definition DEFINITIONS RL = Load resistor; see AC CHARACTERISTICS for value. CL = Load capacitance includes jig and probe capacitance; see AC CHARACTERISTICS for value. RT = Termination resistance should be equal to ZOUT of pulse generators. INPUT PULSE REQUIREMENTS FAMILY Amplitude 74ALVT16 3.0V or VCC whichever is less Rep. Rate 10MHz tW 500ns tR 2.5ns tF 2.5ns SW00162 1998 Feb 13 7 Philips Semiconductors Product specification 2.5V/3.3V ALVT 16-bit buffer/driver (3-State) 74ALVT16241 SSOP48: plastic shrink small outline package; 48 leads; body width 7.5 mm SOT370-1 1998 Feb 13 8 Philips Semiconductors Product specification 2.5V/3.3V ALVT 16-bit buffer/driver (3-State) 74ALVT16241 TSSOP48: plastic thin shrink small outline package; 48 leads; body width 6.1mm SOT362-1 1998 Feb 13 9 Philips Semiconductors Product specification 2.5V/3.3V ALVT 16-bit buffer/driver (3-State) 74ALVT16241 Data sheet status Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Production [1] Please consult the most recently issued datasheet before initiating or completing a design. Definitions Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support -- These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 (c) Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Document order number: Date of release: 05-96 9397-750-03617 Philips Semiconductors yyyy mmm dd 10 |
Price & Availability of 74ALVT16241 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |