 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HCC/HCF40257B QUAD 2-LINE-TO-1-LINE DATA SELECTOR/MULTIPLEXER .3.STANDARDI .5V,10V,AND15VPARAMETRI .I .100%TESTEDFORQUI .MEETSALLREQUI STATE OUTPUTS ZED SYMMETRICAL OUTPUT CHARACTERISTICS C RATINGS NPUT CURRENT OF 100nA AT 18V AND 25C FOR HCC DEVICE ESCENT CURRENT REMENTS OF JEDEC TENTATIVE STANDARD N 13A, "STANDARD SPECIFICATIONS FOR DESCRIPTION OF "B" SERIES CMOS DEVICES" EY (Plastic Package) F (Ceramic Frit Seal Package) M1 (Micro Package) C1 (Plastic Chip Carrier) ORDER CODES : HCC40257BF HCF40257BM1 HCF40257BEY HCF40257BC1 PIN CONNECTIONS DESCRIPTION The HCC40257B (extended temperature range) and HCF40257B (intermediate temperature range) are monolithic integrated circuits, available in 16lead dual in-line plastic or ceramic package and plastic micro package. The HCC/HCF40257B is a Data Selector/Multiplexer featuring three-state outputs which can interface directly with and drive data lines of bus-oriented systems. June 1989 1/11 HCC/HCF40257B FUNCTIONAL DIAGRAM ABSOLUTE MAXIMUM RATINGS Symbol V DD* Vi II Pt ot Parameter Supply Voltage : HC C Types H C F Types Input Voltage DC Input Current (any one input) Total Power Dissipation (per package) Dissipation per Output Transistor for T o p = Full Package-temperature Range Operating Temperature : HCC Types H CF Types Storage Temperature Value - 0.5 to + 20 - 0.5 to + 18 - 0.5 to V DD + 0.5 10 200 100 - 55 to + 125 - 40 to + 85 - 65 to + 150 Unit V V V mA mW mW C C C Top Tstg Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliabili ty. * All voltages are with respect to VSS (GND). RECOMMENDED OPERATING CONDITIONS Symbol V DD VI Top Parameter Supply Voltage : H CC Types H C F Types Input Voltage Operating Temperature : HCC Types H CF Types Value 3 to 18 3 to 15 0 to V DD - 55 to + 125 - 40 to + 85 Unit V V V C C 2/11 HCC/HCF40257B LOGIC DIAGRAM TRUTH TABLE Inputs 3-State O utput Disable 1 0 0 0 0 Select X 0 0 1 1 A X 0 1 X X B X X X 0 1 Output D Z 0 1 0 1 X = Don't Care Logic 1 = High Logic 0 = Low Z = High impedance. 3/11 HCC/HCF40257B STATIC ELECTRICAL CHARACTERISTICS (over recommended operating conditions) Symbol IL Parameter Quiescent Current Test Conditions VO |I O | V D D T L o w* (V) (A) (V) Min. Max. 0/ 5 5 1 0/10 10 2 0/15 15 4 0/20 20 20 0/ 5 5 4 0/10 10 8 0/15 15 16 0/ 5 <1 5 4.95 0/10 <1 10 9.95 0/15 <1 15 14.95 5/10 <1 5 0.05 10/0 <1 10 0.05 15/0 <1 15 0.05 0.5/4.5 < 1 5 3.5 1/9 <1 10 7 1.5/13.5 < 1 15 11 4.5/0.5 < 1 5 1.5 9/1 <1 10 3 13.5/1.5 < 1 15 4 0/ 5 2.5 5 -2 0/ 5 4.6 5 - 0.64 0/10 9.5 10 - 1.6 0/15 13.5 15 - 4.2 0/ 5 2.5 5 - 1.53 0/ 5 4.6 5 - 0.52 0/10 9.5 10 - 1.3 0/15 13.5 15 - 3.6 0/ 5 0.4 5 0.64 0/10 0.5 10 1.6 0/15 1.5 15 4.2 0/ 5 0.4 5 0.52 0/10 0.5 10 1.3 0/15 1.5 15 3.6 VI (V) 0/18 Any Input 0/15 0/18 0/18 0/18 0/18 Any Input 15 18 18 0.3 0.4 1.0 10- 5 0.3 10- 4 0.4 10- 4 1.0 5 7.5 1 12 A 7.5 pF 18 0.1 Value 25 C Min. Typ. Max. 0.02 1 0.02 2 0.02 4 0.04 20 0.02 4 0.02 8 0.02 16 4.95 9.95 14.95 0.05 0.05 0.05 3.5 7 11 1.5 3 4 - 1.6 - 3.2 - 0.51 - 1 - 1.3 - 2.6 - 3.4 - 6.8 - 1.36 - 3.2 - 0.44 - 1 - 1.1 - 2.6 - 3.0 - 6.8 0.51 1 1.3 2.6 3.4 6.8 0.44 1 1.1 2.6 3.0 6.8 10- 5 0.1 T Hi g h * Min. Max. 30 60 120 600 30 60 120 4.95 9.95 14.95 0.05 0.05 0.05 3.5 7 11 1.5 3 4 - 1.15 - 0.36 - 0.9 - 2.4 - 1.1 - 0.36 - 0.9 - 2.4 0.36 0.9 2.4 0.36 0.9 2.4 1 A Unit HCC Types A HCF Types V OH Output High Voltage Output Low Voltage Input High Voltage V V OL V V IH V V IL Input Low Voltage V I OH Output Drive Current HCC Types mA HCF Types IOL Output Sink Current HCC Types HCF Types mA HCC Types HCF Types I O H , I O L ** 3-State HCC Output Types Leakage HCF Current Types CI Input Capacitance I IH, I IL Input Leakage Current * TLow = - 55C for HCC device : - 40C for HCF device. * THigh = + 125C for HCC device : + 85C for HCF device. The Noise Margin for both "1" and "0" level is : 1V min. with VDD = 5V, 2V min. with VDD = 10V, 2.5V min. with VDD = 15V. ** Forced output disable. 4/11 HCC/HCF40257B DYNAMIC ELECTRICAL CHARACTERISTICS (T amb = 25C, CL = 50pF, R L = 200k, typical temperature coefficient for all V D D values is 0.3%/C, all input rise and fall time = 20ns) Symbol t PL H, t PHL Parameter Propagation Delay Time Data Input to Output Test Conditions V D D (V) Min. 5 10 15 Select to Output 5 10 15 Output Disable to Output 5 10 15 t T HL t T L H, Transition Time 5 10 15 Value Typ. 150 70 50 190 85 65 95 50 40 100 50 40 Max. 300 140 100 380 170 130 190 100 80 200 100 80 ns ns ns ns Unit Output Low (sink) Current Characteristics. Output High (source) Current Characteristics. Typical Propagation Delay Time vs. Load Capacitance (Data Input to Output). Typical Transition Time vs. Load Capacitance. 5/11 HCC/HCF40257B Typical Dynamic Power Dissipation vs. Input Frequency (one input to one output). TEST CIRCUITS Quiescent Device Current. Input Voltage. Input Leakage Current. 6/11 HCC/HCF40257B Plastic DIP16 (0.25) MECHANICAL DATA mm MIN. a1 B b b1 D E e e3 F I L Z 3.3 1.27 8.5 2.54 17.78 7.1 5.1 0.130 0.050 0.51 0.77 0.5 0.25 20 0.335 0.100 0.700 0.280 0.201 1.65 TYP. MAX. MIN. 0.020 0.030 0.020 0.010 0.787 0.065 inch TYP. MAX. DIM. P001C 7/11 HCC/HCF40257B Ceramic DIP16/1 MECHANICAL DATA mm MIN. A B D E e3 F G H L M N P Q 7.8 2.29 0.4 1.17 0.22 0.51 0.38 17.78 2.79 0.55 1.52 0.31 1.27 10.3 8.05 5.08 0.307 0.090 0.016 0.046 0.009 0.020 3.3 0.015 0.700 0.110 0.022 0.060 0.012 0.050 0.406 0.317 0.200 TYP. MAX. 20 7 0.130 MIN. inch TYP. MAX. 0.787 0.276 DIM. P053D 8/11 HCC/HCF40257B SO16 (Narrow) MECHANICAL DATA DIM. MIN. A a1 a2 b b1 C c1 D E e e3 F G L M S 3.8 4.6 0.5 9.8 5.8 1.27 8.89 4.0 5.3 1.27 0.62 8 (max.) 0.149 0.181 0.019 10 6.2 0.35 0.19 0.5 45 (typ.) 0.385 0.228 0.050 0.350 0.157 0.208 0.050 0.024 0.393 0.244 0.1 mm TYP. MAX. 1.75 0.2 1.65 0.46 0.25 0.013 0.007 0.019 0.004 MIN. inch TYP. MAX. 0.068 0.007 0.064 0.018 0.010 P013H 9/11 HCC/HCF40257B PLCC20 MECHANICAL DATA mm MIN. A B D d1 d2 E e e3 F G M M1 1.27 1.14 7.37 1.27 5.08 0.38 0.101 0.050 0.045 9.78 8.89 4.2 2.54 0.56 8.38 0.290 0.050 0.200 0.015 0.004 TYP. MAX. 10.03 9.04 4.57 MIN. 0.385 0.350 0.165 0.100 0.022 0.330 inch TYP. MAX. 0.395 0.356 0.180 DIM. P027A 10/11 HCC/HCF40257B Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. (c) 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A 11/11 |
Price & Availability of HCCHCF40257B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |