View MN31121SA_279883.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Video Camera LSI
MN31121SA
CCD Image Sensor Vertical Driver IC
I Overview
The MN31121SA is a 2D interline CCD image sensor vertical driver IC that integrates four vertical driver channels and one SUB drive channel on a single chip. This IC can reduce power consumption and the number of external parts. The MN31121SA consists of a vertical driver block that includes both level shifter circuits and 2-value and 3-value output driver circuits, and a SUB driver block that includes level shifter and 2-value output driver circuits.
I Features
* Level shifter circuits Input (VDC, ground) output (VHH , VL) * 2-value output driver circuits (vertical driver block) Outputs: VM24 and VL * 3-value output driver circuits (vertical driver block) Outputs: VH, VM13, and VL * 2-value output driver circuits (SUB driver block) Outputs: VHH and VL
OSUB VL OV2 VM13 OV1 VDC IV1 CH1 IV2 ISUB
1 2 3 4 5 6 7 8 9 10
20 19 18 17 16 15 14 13 12 11
VHH VM24 OV4 OV3 VH N.C. IV3 CH2 IV4 N.C.
(TOP VIEW)
I Applications
* Video cameras, surveillance cameras, digital still cameras, CCD camera systems
Publication date: November 2001
SDB00054BEM
1
MN31121SA
I Block Diagram
OSUB
1
20
VHH
VL
2
19
VM24
OV2
3
18
OV4
VM13
4
3-value driver
17
OV3
OV1
5
3-value driver
16
VH
VDC
6
15
N.C.
IV1
7
Level shifter
Level shifter
14
IV3
CH1
8
Level shifter
Level shifter
13
CH2
IV2
9
Level shifter
Level shifter
12
IV4
ISUB
10
Level shifter
11
N.C.
Note) VDC , VL: Common power supply VM13 , VM24: Vertical driver block 2-value and 3-value independent power supply VHH , VH: SUB driver block and vertical driver block 3-value independent power supply
2
SDB00054BEM
MN31121SA
I Pin Descriptions
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Pin name OSUB VL OV2 VM13 OV1 VDC IV1 CH1 IV2 ISUB N.C. IV4 CH2 IV3 N.C. VH OV3 OV4 VM24 VHH I/O O I O I O I I I I I I I I I O O I I Description SUB pulse output Low-level power supply 2-value transfer pulse output Mid-level power supply 3-value transfer pulse output Input block high-level power supply Transfer pulse input Charge pulse input Transfer pulse input SUB pulse input Unused Transfer pulse input Charge pulse input Transfer pulse input Unused High-level power supply of vertical driver block 3-value transfer pulse output 2-value transfer pulse output Mid-level power supply High-level power supply of SUB driver block
I Electrical Characteristics
1. Absolute Maximum Ratings Parameter Supply voltage 1 Supply voltage 2 Supply voltage 3 Supply voltage 4 Negative supply voltage Input voltage Input and output clamp diode currents Maximum DC load current Maximum load capacitance Power dissipation Operating temperature Storage temperature Symbol VHH-VL VH-VL VM13 , VM24 VDC VL VI IIC , IOC IODC CL PD Topr Tstg Rating 32 30 VL to 6 0 to 7 -12 to 0 VL- 0.3 to VDC+0.3 10 3 5 500 180 -10 to +70 -50 to +125 Unit V V V V V V mA mA pF/PIN mW C C
Note) The absolute maximum ratings are stress ratings only, and do not guarantee operation. Stress in excess of the maximum rating may destroy the device.
SDB00054BEM
3
MN31121SA
I Electrical Characteristics (continued)
2. Operating Conditions at Ta = -10C to +70C Parameter Supply voltage 1 Supply voltage 2 Supply voltage 3 Supply voltage 4 Supply voltage 5 Negative supply voltage Input frequency Symbol VHH-VL VH-VL VM13 , VM24 VHH-VM13 VHH-VM24 VDC VL fIN Conditions Min VH-VL 17 -1 12 2.5 -10 Typ Max 30.5 28 4 3.6 -4 20 Unit V V V V V V kHz
3. DC Characteristics at VHH = 18.0 V, VH = 13.0 V, VM13 = VM24 = 1.0 V, VL = -7.0 V, VDC = 3.00 V, Ta = -10C to +70C Parameter Quiescent supply current Symbol IDDST IDDDYN Conditions VI = GND, VDC = 2.6 V VI = GND, VDC = 3.0 V Operating supply current Refer to test conditions (Input pulse timing, output load circuit) VI = GND, VDC VDC = 2.6 V VDC = 3.0 V VI = 0 V to VDC IOM1 = -1 mA IOL1 = 1 mA IOM1 = -50 mA IOL1 = 50 mA IOH2 = -1 mA IOM2 = -1 mA IOL2 = 1 mA IOH2 = -50 mA IOM2 = 50 mA IOL2 = 50 mA IOHH3 = -1 mA IOL3 = 1 mA
SDB00054BEM
Min
Typ
Max 2 5 7
Unit mA
mA
Input Pins
IV1 , IV2 , IV3 , IV4 , CH1, CH2, ISUB VIH VIL VIH VIL IILK 1.75 0.0 2.5 0.0 -1.0 VDC 0.15 VDC 0.3 +1.0 V V V V A
High-level voltage Low-level voltage High-level voltage Low-level voltage Input leakage current Output Pins 1 (2-value outputs) Mid-level output voltage Low-level output voltage Output on resistance (mid level) Output on resistance (low level) Output Pins 2 (3-value outputs) High-level output voltage Mid-level output voltage Low-level output voltage Output on resistance (high level) Output on resistance (mid level) Output on resistance (low level) Output Pins 3 (SUB outputs) High-level output voltage Low-level output voltage
OV2 , OV4 VOM1 VOL1 RONM1 RONL1 0.9 VL VM24 -6.9 60 40 V V
OV1 , OV3 VOH2 VOM2 VOL2 RONH2 RONM2 RONL2 OSUB VOHH3 VOL3 17.9 VL VHH -6.9 V V 12.9 0.9 VL VH VM13 -6.9 70 60 60 V V V
4
MN31121SA
I Electrical Characteristics (continued)
3. DC Characteristics (continued) at VHH = 18.0 V, VH = 13.0 V, VM13 = VM24 = 1.0 V, VL = -7.0 V, VDC = 3.00 V, Ta = -10C to +70C Parameter Symbol OSUB IONHH3 = -50 mA IONL3 = 50 mA 60 50 Conditions Min Typ Max Unit Output Pins 3 (SUB outputs) (continued) Output on resistance (high level) Output on resistance (low level) RONHH3 RONL3
4. AC Characteristics at VHH = 18.0 V, VH = 13.0 V, VM13 = VM24 = 1.0 V, VL = -7.0 V, VDC = 3.00 V, Ta = -10C to +70C Parameter Output Pins 1 (2-value outputs) Propagation delay time Rise time Fall time Output Pins 2 (3-value outputs) Propagation delay time Propagation delay time Rise time Fall time Rise time Fall time Output Pins 3 (SUB output) Propagation delay time Rise time Fall time Symbol OV2 , OV4 TPLM TPML TTLM TTML No load, Low level to mid level Refer to test conditions (Output load circuit) 150 300 250 400 ns ns Conditions Min Typ Max Unit
OV1 , OV3 TPLM TPML TPMH TPHM TTLM TTML TTMH TTHM OSUB TPLHH TPHHL TTLHH TTHHL No load, Low level to high level Refer to test conditions (Output load circuit) 150 300 250 400 ns ns No load, Low level to mid level No load, Mid level to high level Refer to test conditions (Output load circuit) Refer to test conditions (Output load circuit) 150 200 300 350 250 400 400 550 ns ns ns ns
I Test Conditions
1. Output Load Circuit
800 pF 500 pF OV1 1 500 pF OV2 1 000 pF 500 pF
1 000 pF OV4 1 500 pF OV3 800 pF OSUB 2 700 pF
SDB00054BEM
5
MN31121SA
I Test Conditions (continued)
2. Input Pulse Timing Charts (NTSC)
63.5 s 2 s IV1
508 s
63.5 s
IV2
IV3
IV4
CH1 15 s
CH2
1 cycle 60 Hz ISUB
I Function Tables
1. 2-Value Transfer Pulse (vertical driver block) IV2 IV4 High Low OV2 OV4 Low Mid Low 2. 3-Value Transfer Pulse CH1 CH2 High IV1 IV3 High Low High Low
Note) IV1, IV2, IV3, IV4, CH1, CH2 High: VDC, Low: Ground OV1, OV2, OV3, OV4 High: VH, Mid: VM13 or VM24, Low: VL
OV1 OV3 Low Mid Low High
6
SDB00054BEM
MN31121SA
I Function Tables (continued)
3. Unnecessary Charge Sweep-Out Pulse (SUB driver block) ISUB High Low OSUB Low High
Note) ISUB High: VDC, Low: Ground OSUB High: VHH, Low: VL
I Timing Charts
1. 2-value transfer pulse 63.5 s 2 s IV2 OV2 Low 2. 2-value transfer pulse IV4 OV4 3. 3-value transfer pulse IV1 15 s CH1 High Low High Low High OV1 Mid Low 4. 3-value transfer pulse IV3 CH2 High Low High Low High Mid OV3 Low
SDB00054BEM
508 s
63.5 s High Low Mid
High Low Mid Low
7
MN31121SA
I Timing Charts (continued)
5. SUB pulse ISUB OSUB Low High Low High
I Usage Notes
1. If the SUB driver is not used: 1) Connect VHH (pin 20) to VH (pin 16). 2) Connect ISUB (pin 10) to VDC (pin 6). 3) Leave OSUB (pin 1) open. 2. Mount the bypass capacitors for power supply pins VHH (pin 20), VH (pin 16), VM13 (pin 4), VM24 (pin 19), VL (pin 2), and VDC (pin 6) as close as possible to the pin itself. 3. If the overcurrents that occur at power on and power off are limited to under 10 ms and under 100 mA, then the MN31121SA is guaranteed for 10,000 power cycle (power on/power off) operations. 4. Guarantee period after packing is opened The guarantee period after opening the moisture-proof packing is three weeks under environmental conditions of 30C and 70% RH. 5. The recommended reflow soldering temperature is 230C.
8
SDB00054BEM
768H CCD image sensor MN39143FT/39243FT OSUB 1 20 VHH VHH VM24 V1 12 V2 13 V3 14 VH 3.3 F/5 V N.C.
1 M 2 200pF
VL OV2 3 VM13 4 3-value driver 3-value driver 15 Level shifter Level shifter Level shifter Level shifter 11 N.C. 12 IV4
200 k
VL 2 18 OV4 17 OV3 16 VH
I Application Circuit Example
19 VM24
VM13 OV1 5 VDC 6 IV1 7 14 IV3 13 CH2 CH1 8 Level shifter Level shifter Level shifter IV2 9 ISUB 10
V4 15 SUB 10
VDC
SDB00054BEM
CCD drive logic MN6732741
8 V1
6 V2
+16 V
47 k
3.3 F/50 V
3 V3
2 V4
14 CH1
12 CH2
10 SUB
MN31121SA
Note) Mount the bypass capacitors for the MN31121SA power supply pins (VHH, VH, VM13, VM24, VL, and VDC) as close as possible to the pin itself.
9
MN31121SA
I Package Dimensions (Unit: mm)
* SSOP020-P-0225
6.500.20 20 11
1.000.20
4.300.20 6.300.30
0.15 -0.05
+0.10
0 to 8 0.30 min. 1 (0.33) 0.65 10 0.250.10
1.500.20
0.13 M
1.90 max.
Seating plane
0.100.10
0.10
Seating plane
Note) The package of this product will be changed to the following lead-free type (SSOP020-P-0225C).
I New Package Dimensions (Unit: mm)
* SSOP020-P-0225C (Lead-free package) 6.500.20 20 11 1.000.20
4.300.20 6.300.30
+0.10 0.15-0.05
0 to 8 1 (0.325) 10 0.250.10 0.30 min. 0.13 M
0.100.10 1.500.20 1.90 max.
0.65
Seating plane
0.10
Seating plane
10
SDB00054BEM
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR

▲Up To Search▲

Price & Availability of MN31121SA

	To Download MN31121SA Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .