 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers CERAMIC FILTERS (CERAFILr) Murata Manufacturing Co., Ltd. Cat.No.P61E-7 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 CONTENTS Part Numbering 1 CERAFILr Chip Type SFECV Series Chip CERAFILr SFECV Series Notice 1 CERAFILr and "CERAFIL" in this catalog are the trademarks of Murata Manufacturing Co., Ltd. 2 3 6 7 10 11 14 17 20 23 25 28 33 36 37 38 41 42 44 45 49 50 53 54 2 3 2 CERAFILr Small Chip Type SFECS Series Chip CERAFILr SFECS Series Notice 4 3 4 5 6 7 8 9 10 CERAFILr Standard Lead Type CERAFILr Low-loss Type CERAFILr Low-profile Type CERAFILr Lower Spurious Response Type CERAFILr Wider Band-width Type CERAFILr Narrow Band Type CERAFILr For FM -IF Tuners CERAFILr Three-Elements Type SFTLA Series 5 6 7 8 Lead Type CERAFILr Test Circuit and Characteristics Data Lead Type CERAFILr Characteristics Data and Notice 11 Discriminators Chip Type CDACV Series Chip Type Discriminators CDACV Series Notice 9 10 12 Discriminators Chip Low-profile Type CDSCA Series Chip Type Discriminators CDSCA Series Notice 11 13 Discriminators CDALA Series Lead Type Discriminators Notice 12 Packaging Test Circuit of Ceramic Discriminator Example of Appllied Circuit 13 Recycled Paper Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 o Part Numbering the "Global Part Numbers" that have been adopted and the ( The structure ofquestions about details, inquire at your usual Muratasince June 2001distributor.meaning of each code are described herein.) If you have any sales office or CERAFILr for FM (Global Part Number) qProduct ID Product ID SF wOscillation/Numbers of Element Code E T K V Oscillation/Numbers of Element 2 Elements Thickness Expander mode 3 Elements Thickness Expander mode 2 Elements Thickness Expander mode (2nd Harmonic) 2 Elements Thickness Expander mode (3rd Over Tone) yPackaging Code -B0 -R0 -R1 -A0 -A1 eStructure/Size Code Lp Cp Structure/Size Lead Type Chip Type Packaging Bulk Plastic Taping o180mm Plastic Taping o330mm 1500pcs. /Radial Taping H0=18mm 1000pcs. /Radial Taping H0=18mm Ceramic Filters FAA0 SF q E w LA e 10M7 FAA0 r t -R0 y tProduct Specification Code Product Specification Four-digit alphanumerics express pass-bandwidth, center frequency tolerance, rank, series, others. Radial taping is applied to lead type and plastic taping to chip type. With non-standard products, two-digit alphanumerics indicating "Individual Specification" is added between "tProduct Specification" and "yPackaging". p is expressed "A" or subsequent code, which indicates the size. rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (MHz). Decimal point is expressed by capital letter "M". Discriminators for FM (Global Part Number) qProduct ID Product ID CD wOscillation Code A eStructure/Size Code Lp Cp Structure/Size Lead Type Chip Type uPackaging Code -B0 -A0 -R0 rNominal Center Frequency Expressed by four-digit alphanumerics . The unit is in hertz (MHz). Decimal point is expressed by capital letter "M". -R1 Packaging Bulk Radial Taping H0=18mm Plastic Taping (o180mm) Plastic Taping (o330mm) Oscillation Thickness Expander mode yIC Code 001 IC Applicable IC Control Code Discriminators CD q A w LA e 10M7 r GA t 001 -R0 y u tProduct Specification Code GA Product Specification Two-digit alphanumerics express type, center frequency, rank, others p is expressed "A" or subsequent code, which indicates the size. Radial taping is applied to lead type and plastic taping to chip type. With non-standard products, an alphanumerics indicating "Individual Specification" is added between "yIC" and "uPackaging". 2 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers CERAFILr Chip Type SFECV Series 6.90.3 4.050.4 1 1.50.2 SFECV10M7 series for FM-receivers are monolithic type ceramic filters which utilize the energy trapped thickness vibration-mode of the piezoelectric ceramic. By taking advantage of the very low profile, new SFECV series and PFWCC(kHz filter for AM receiver) enable costomers to make AM/FM set so thin, and it can be of help to the total chip circuit. 1.20.5 1.20.3 1.20.5 1.50.2 2.90.3 * * (3) (2) * (1) Side Electrode : Marking (1) : Input (2) : Ground (3) : Output Bottom Electrode s Features 1. Super-thin. Only 1.5mm. The most suitable ceramic filter available for thinning substrates. 2. Heat resistant. Reflow soldering can be performed because of its excellent heat resistance. 3. Piezoelectric element is connected in the sandwich shape by heat resistant substrate, thus it has excellent mechanical strength, and it is suitable for automatic mounting. 4. Various bandwidths are available. Select a suitable type in accordance with the desired selectivity. 5. Electrical characteristics are the same as conventional "CERAFIL". 1.00.5 1.00.5 1.00.5 ** : EIAJ Monthly Code ** : Center Frequency Rank Code (in mm) s Applications 1. Small, thin radios 2. Automotive radios 3. Headphone steros Center Frequency (fo) (MHz) 10.700 30kHz 10.700 30kHz 10.700 30kHz 10.700 30kHz 10.700 30kHz 3dB Bandwidth (kHz) within110 30kHz within150 40kHz within180 40kHz within230 50kHz within280 50kHz Attenuation (kHz) 320 max. 380 max. 470 max. 510 max. 590 max. Insertion Loss (dB) within6.0 2.0dB 10.0 max. within4.0 2.0 dB within3.5 2.0 dB within3.0 2.0 dB Spurious Attenuation (dB) 35 min. 30 min. 35 min. 35 min. 35 min. Part Number SFECV10M7KA00-R0 SFECV10M7JA00-R0 SFECV10M7HA00-R0 SFECV10M7GA00-R0 SFECV10M7FA00-R0 Area of Attenuation : [within 20dB] Area of Spurious Attenuation : [within 9MHz to 12MHz] Center frequency(fo) defined by the center of 3dB bandwidth. s Center Frequency Rank Code CODE D B A C E Z M 30kHz Step 10.64MHz30kHz 10.67MHz30kHz 10.70MHz30kHz 10.73MHz30kHz 10.76MHz30kHz 25kHz Step 10.650MHz25kHz 10.675MHz25kHz 10.700MHz25kHz 10.725MHz25kHz 10.750MHz25kHz Combination A,B,C,D,E Combination A,B,C 3 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 1 s Frequency Characteristics SFECV10M7KA00-R0 0 10 20 Attenuation (dB) 30 40 50 60 70 9.700 Attenuation (dB) 0 10 20 30 40 50 60 70 9.700 SFECV10M7JA00-R0 10.200 10.700 Frequency (MHz) 11.200 11.700 10.200 10.700 Frequency (MHz) 11.200 11.700 SFECV10M7HA00-R0 0 6.00 0 1 2 Attenuation (dB) G.D.T. (sec.) 3 4 5 6 6 7 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 3.00 2.50 7 10.500 SFECV10M7GA00-R0 5.50 5.00 4.50 4.00 3.50 3.00 2.50 2.00 G.D.T. (sec.) 1 5.50 2 Attenuation (dB) 5.00 3 4.50 4 4.00 5 3.50 10.600 10.700 Frequency (MHz) 10.800 10.900 SFECV10M7FA00-R0 0 1 2 Attenuation (dB) 3 4 5 6 7 5.00 4.50 4.00 3.50 3.00 2.50 2.00 1.50 G.D.T. (sec.) 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 s Frequency Characteristics (Spurious) SFECV10M7KA00-R0 0 10 20 Attenuation (dB) Attenuation (dB) 30 40 50 60 70 8.700 0 10 20 30 40 50 60 70 8.700 SFECV10M7JA00-R0 9.700 10.700 Frequency (MHz) 11.700 12.700 9.700 10.700 Frequency (MHz) 11.700 12.700 Continued on the following page. 4 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. Continued from the preceding page. P61E7.pdf 01.10.17 s Frequency Characteristics (Spurious) SFECV10M7HA00-R0 0 0 SFECV10M7GA00-R0 1 10 10 20 Attenuation (dB) Attenuation (dB) 9.700 10.700 Frequency (MHz) 11.700 12.700 20 30 30 40 40 50 50 60 70 8.700 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 SFECV10M7FA00-R0 0 10 20 Attenuation (dB) 30 40 50 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 s Standard Land Pattern Dimensions 1.2 1.2 1.2 s Test Circuit (1): Input (2): Ground (3): Output R1 (1) (2) E1 S.S.G. =-10dBm R2 C2 E2 RF Voltmeter (3) 4.0 Rg 1.65 2.85 1.65 2.85 Rg = 50 R1 = 280 5% R2 = 330 5% C2 = 10 2 pF (Including stray capacitance and Input capacitance of RF Volt Meter) E1 : S.S.G. S.S.G. Output Voltage Land (in mm) 5 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 1 Chip CERAFILr SFECV Series Notice s Notice (Soldering and Mounting) 1. Standard Reflow Soldering Condition (1) Reflow 240 230 Temperaturu(C) 5sec. Gradual Cooling 150 60 30 Time(sec.) (2) Soldering Iron Lead terminal is directly contacted with the tip of soldering iron of 2805C for 3.00.5 seconds. 2. Wash The component cannot be withstand washing. s Notice (Handling) 1. The component will be damaged when an excessive stress is applied. 2. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 3. Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. 4. After installing chips, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to lower. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. 5. When the positioning claws and pick up nozzle are worn, the load is applied to the chip while positioning is concentrated to one positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. 6. When correcting chips with a soldering iron, the tip of the soldering iron should not directly touch the chip component. Depending on the soldering conditions, the effective area of terminations may be reduced. the use of solder containing Ag should be done to prevent the electrode erosion. 7. Do not clean or wash the component as it is not hermetically sealed. 8. In case of covering filter with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated well. 9. Do not use strong acidity flux, more than 0.2wt% chlorine content, in re-flow soldering. 10. Accurate test circuit values are required to measure electrical characteristics.It may be a cause of miscorrelation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 6 [Component direction] Put the component lateral to the direction in which stress acts. [Component layout close to board] Perforation B A Slit C Susceptibility to stress is in the order of : A>C>B Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers CERAFILr Small Chip Type SFECS Series 2 SFECS10M7 series for FM-receivers are small, high performance and super thin (1.4mm) filters. Piezoelectric element is connected in the sandwich shape by ceramics substrate. They have 1.4mm thickness and small mounting area. (3.5x3.1mm) New SFECS series and PFWCC(kHz filter for AM receiver) enable customers to make AM/FM set so thin and small sized. 3.10T0.2 0.85T0.3 3.45T0.2 1.4T0.1 0.7T0.3 0.7T0.3 0.7T0.3 0.85T0.3 FA (1) (2) (4) (3) (1.30) (1.30) 0-0.3 Input electrode marker 0.4 W0.3 Y0.2 0.6T0.3 0-0.3 0-0.3 0-0.3 0.6T0.3 (1.35) (1.35) (1) : Input (2) : Ground (3) : Float (Signal line) (4) : Output (*) : Reference : EIAJ Monthly Code (in mm) s Features 1. The filters are mountable by automatic placers. 2. They are slim, at only 1.4mm thickness, and have a small mounting area (3.5x3.1mm) enabling flexible PCB design. 3. Various bandwidths are available. Select a suitable type in accordance with the desires selectivity. 4. Operating temperature range : -20 to +80 (degree C) Storage temperature range : -40 to +85 (degree C) s Applications 1. Small, thin radios 2. Headphone stereos Center Frequency (fo) (MHz) 10.700 30kHz 10.700 30kHz 10.700 30kHz 3dB Bandwidth (kHz) within180 40kHz within230 50kHz within280 50kHz Attenuation (kHz) 470 max. 510 max. 590 max. Insertion Loss (dB) within4.5 2.0 dB within3.5 2.0 dB within3.0 2.0 dB Spurious Attenuation (dB) 30 min. 30 min. 30 min. Part Number SFECS10M7HA00-R0 SFECS10M7GA00-R0 SFECS10M7FA00-R0 Area of Attenuation : [within 20dB] Area of Spurious Attenuation : [within 9MHz to 12MHz] Center frequency(fo) defined by the center of 3dB bandwidth. s Center Frequency Rank Code CODE D B A C E Z M 30kHz Step 10.64MHz30kHz 10.67MHz30kHz 10.70MHz30kHz 10.73MHz30kHz 10.76MHz30kHz 25kHz Step 10.650MHz25kHz 10.675MHz25kHz 10.700MHz25kHz 10.725MHz25kHz 10.750MHz25kHz Combination A,B,C,D,E Combination A,B,C 7 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 s Frequency Characteristics SFECS10M7HA00-R0 0 5.60 5.40 0 SFECS10M7GA00-R0 5.00 4.80 2 Attenuation (dB) 4.60 4.40 G.D.T. (sec.) 4 4.20 4.00 6 3.80 3.60 8 3.40 3.20 10 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 3.00 G.D.T. (sec.) 2 Attenuation (dB) 2 5.20 5.00 4 4.80 4.60 6 4.40 4.20 8 4.00 3.80 10 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 3.60 SFECS10M7FA00-R0 0 4.60 4.40 2 Attenuation (dB) 4.20 4.00 4 3.80 3.60 6 3.40 3.20 8 3.00 2.80 10 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 2.60 G.D.T. (sec.) s Frequency Characteristics (Spurious) SFECS10M7HA00-R0 0 0 SFECS10M7GA00-R0 10 Attenuation (dB) Attenuation (dB) 9.700 10.700 Frequency (MHz) 11.700 12.700 10 20 20 30 30 40 40 50 8.700 50 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 SFECS10M7FA00-R0 0 10 Attenuation (dB) 20 30 40 50 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 8 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 s Standard Land Pattern Dimensions 0.1 s Test Circuit (3) 1.05 R1 (2) 0.3 0.1 (4) 0.3 (1) 1.40 Rg E1 S.S.G. =-10dBm 1.05 (4) 2 R2 C2 E2 RF Voltmeter 0.3 0.1 0.8 0.6 0.8 0.6 0.8 0.1 Rg=50 R1=280 R2=330 C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) (1) : Input (2) : Ground (3) : Float (4) : Output (1) : Input (2) : Ground (3) : Float Signal Line (4) : Out put It shows solder resist land pattern. (in mm) 0.1 (1) (2) (3) 0.1 9 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Chip CERAFILr SFECS Series Notice s Notice (Soldering and Mounting) 2 1. Standard Reflow Soldering Condition (1) Reflow Temperature (C) 240 200 Pre-heating (120-170C) Heating (200C) Gradual Cooling Peak (240C max.) 100 (2) Soldering Iron Filter shall be soldered at 2805C for 3.00.5 seconds. The soldering iron shall not touch the filter white soldering. 2. Wash The component cannot be withstand washing. 30 sec. min. 60-120 sec. 30 sec. max. 120 sec. min. s Notice (Handling) 1. The component will be damaged when an excessive stress is applied. 2. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 3. Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. 4. After installing chips, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to lower. To prevent this, be extremly careful in determining shape and dimension before designing the circuit board diagram. 5. When the positioning claws and pick up nozzle are worn, the load is applied to the chip while positioning is concentrated to one positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. 6. When correcting chips with a soldering iron, the tip of the soldering iron should not directly touch the chip component. Depending on the soldering conditions, the effective area of terminations may be reduced. The use of solder containing Ag should be done to prevent the electrode erosion. 7. Do not clean or wash the component as it is not hermetically sealed. 8. In case of covering filter with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated well. 9. Do not use strong acidity flux, more than 0.2wt% chlorine content, in re-flow soldering. 10. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of mis-correlation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 10 [Component layout close to board] Perforation B A Slit C Susceptibility to stress is in the order of : A>C>B Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers CERAFILr Standard Lead Type 7.02.0 EIAJ CODE s Features 1. These miniature filters have high mechanical strength. 2. Low loss, favorable waveform symmetry, and high selectivity. 3. Various band widths are available for applications in wide to narrow bands. 4. Small dispersion and stable characteristics. 5. Change in center frequency is typically within 30ppm/(degree C) at -20 to +80 (degree C). 6. High reliability. 1.380.2 1.70.1 0.50.1 5.01.0 2.50.2 2.50.2 0.30.1 3.01.0 7.02.0 SFELA10M7 series for FM-receivers are monolithic type ceramic filters which use the energy trapped thickness vibration-mode of the piezoelectric ceramic. MARKING 3 SFELA10M7HA00-B0 (1) : Input (2) : Ground (3) : Output (in mm) (3) (2) (1) 7.02.0 MARKING EIAJ CODE 1.380.2 1.70.1 0.50.1 5.01.0 2.50.2 2.50.2 0.30.1 3.01.0 7.02.0 SFELA10M7GA00-B0 (1) : Input (2) : Ground (3) : Output (in mm) (3) (2) (1) 7.02.0 MARKING EIAJ CODE 1.380.2 1.70.1 0.50.1 5.01.0 2.50.2 2.50.2 0.30.1 3.01.0 7.02.0 SFELA10M7FA00-B0 (1) : Input (2) : Ground (3) : Output (in mm) (3) (2) (1) Part Number SFELA10M7HA00-B0 SFELA10M7GA00-B0 SFELA10M7FA00-B0 Center Frequency (fo) (MHz) 10.700 30kHz 10.700 30kHz 10.700 30kHz 3dB Bandwidth (kHz) within180 40kHz within230 50kHz within280 50kHz Attenuation (kHz) 520 max. 570 max. 650 max. Insertion Loss (dB) 7.0 max. within4.0 2.0dB within4.0 2.0dB Spurious Attenuation (dB) 40 min. 40 min. 30 min. Area of Attenuation : [within 20dB] Area of Spurious Attenuation : [within 9MHz to 12MHz] Center frequency(fo) defined by the center of 3dB bandwidth. 11 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 s Center Frequency Rank Code CODE D B A C E Z 30kHz Step 10.64MHz30kHz 10.67MHz30kHz 10.70MHz30kHz 10.73MHz30kHz 10.76MHz30kHz 25kHz Step 10.650MHz25kHz 10.675MHz25kHz 10.700MHz25kHz 10.725MHz25kHz 10.750MHz25kHz Combination A,B,C,D,E Combination A,B,C 3 M s Frequency Characteristics SFELA10M7HA00-B0 0 1 2 Attenuation (dB) 6.00 5.50 5.00 Attenuation (dB) G.D.T. (sec.) 4.50 4.00 3.50 3.00 2.50 0 1 2 SFELA10M7GA00-B0 5.50 5.00 4.50 4.00 3.50 3.00 2.50 2.00 G.D.T. (sec.) 3 4 5 6 3 4 5 6 7 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 7 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 SFELA10M7FA00-B0 0 1 2 Attenuation (dB) 5.00 4.50 4.00 3.50 3.00 2.50 2.00 1.50 G.D.T. (sec.) 3 4 5 6 7 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 s Frequency Characteristics (Spurious) SFELA10M7HA00-B0 0 10 20 Attenuation (dB) Attenuation (dB) 0 10 20 SFELA10M7GA00-B0 30 40 50 60 30 40 50 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 Continued on the following page. 12 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. Continued from the preceding page. P61E7.pdf 01.10.17 s Frequency Characteristics (Spurious) SFELA10M7FA00-B0 0 10 20 Attenuation (dB) 30 40 50 60 3 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 s Spurious Response SFELA10M7FA00-B0 0 10 20 Attenuation (dB) 30 40 50 60 70 0 20 40 60 80 100 Frequency (MHz) 13 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers CERAFILr Low-loss Type 7.02.0 EIAJ CODE s Features 1.380.2 1.70.1 0.50.1 5.01.0 2.50.2 2.50.2 0.30.1 3.01.0 4 1. Insertion loss is 1 to 1.5dB lower than conventional products. This types are useful for elevating the sensitivity of sets. 2. Small dispersion and stable characteristics. 3. Excellent shape factor of frequency response. 4. Good waveform symmetry. 7.02.0 SFELA10M7 series for FM-receivers are monolithic type ceramic filters which use the energy trapped thickness vibration-mode of the piezoelectric ceramic. MARKING SFELA_JAA0-B0 (1) : Input (2) : Ground (3) : Output (in mm) (3) (2) (1) 7.02.0 MARKING EIAJ CODE 1.380.2 1.70.1 0.50.1 5.01.0 2.50.2 2.50.2 0.30.1 3.01.0 7.02.0 SFELA_HAA0-B0 (1) : Input (2) : Ground (3) : Output (in mm) (3) (2) (1) 7.02.0 7.02.0 MARKING 7.02.0 EIAJ CODE MARKING EIAJ CODE 1.380.2 1.70.1 5.01.0 0.50.1 1.380.2 1.70.1 0.50.1 5.01.0 2.50.2 2.50.2 3.01.0 3.01.0 (1) : Input (2) : Ground (3) : Output (in mm) (3) (2) (1) 0.30.1 2.50.2 2.50.2 0.30.1 7.02.0 SFELA_GAA0-B0 SFELA_FAA0-B0 (1) : Input (2) : Ground (3) : Output (in mm) (3) (2) (1) Part Number SFELA10M7JAA0-B0 SFELA10M7HAA0-B0 SFELA10M7GAA0-B0 SFELA10M7FAA0-B0 Center Frequency (fo) (MHz) 10.700 30kHz 10.700 30kHz 10.700 30kHz 10.700 30kHz 3dB Bandwidth (kHz) within150 40kHz within180 40kHz within230 50kHz within280 50kHz Attenuation (kHz) 360 max. 470 max. 520 max. 590 max. Insertion Loss (dB) within4.5 2.0dB within3.5 1.5dB within3.0 2.0dB within2.5 2.0dB Spurious Attenuation (dB) 35 min. 35 min. 35 min. 30 min. Area of Attenuation : [within 20dB] Area of Spurious Attenuation : [within 9MHz to 12MHz] Center frequency(fo) defined by the center of 3dB bandwidth. 14 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 s Center Frequency Rank Code CODE D B A C E Z M 30kHz Step 10.64MHz30kHz 10.67MHz30kHz 10.70MHz30kHz 10.73MHz30kHz 10.76MHz30kHz 25kHz Step 10.650MHz25kHz 10.675MHz25kHz 10.700MHz25kHz 10.725MHz25kHz 10.750MHz25kHz Combination A,B,C,D,E Combination A,B,C s Frequency Characteristics SFELA10M7JAA0-B0 0 1 2 Attenuation (dB) 3 4 5 6 7 7.50 7.00 6.50 Attenuation (dB) G.D.T. (sec.) 6.00 5.50 5.00 4.50 4.00 0 1 2 3 4 5 6 7 SFELA10M7HAA0-B0 6.50 6.00 5.50 5.00 4.50 4.00 3.50 3.00 G.D.T. (sec.) 4 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 SFELA10M7GAA0-B0 0 1 2 Attenuation (dB) 3 4 5 6 7 6.50 6.00 5.50 Attenuation (dB) G.D.T. (sec.) 5.00 4.50 4.00 3.50 3.00 0 1 2 3 SFELA10M7FAA0-B0 5.50 5.00 4.50 4.00 G.D.T. (sec.) 4 5 3.50 3.00 6 7 2.50 2.00 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 s Frequency Characteristics (Spurious) SFELA10M7JAA0-B0 0 10 20 Attenuation (dB) Attenuation (dB) 30 40 50 60 70 8.700 0 10 20 30 40 50 60 70 8.700 SFELA10M7HAA0-B0 9.700 10.700 Frequency (MHz) 11.700 12.700 9.700 10.700 Frequency (MHz) 11.700 12.700 Continued on the following page. 15 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. Continued from the preceding page. P61E7.pdf 01.10.17 s Frequency Characteristics (Spurious) SFELA10M7GAA0-B0 0 10 20 Attenuation (dB) Attenuation (dB) 30 40 50 60 70 8.700 0 10 20 30 40 50 60 70 8.700 SFELA10M7FAA0-B0 4 9.700 10.700 Frequency (MHz) 11.700 12.700 9.700 10.700 Frequency (MHz) 11.700 12.700 16 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers CERAFILr Low-profile Type 7.52.0 MARKING SFELB10M7KA00-B0 3.01.0 1. Installed height is 5 mm, making it well suited for compact, thin sets. 2. Environmental reliability is the same as those of the ceramic filter SFELA10M7 series. 0.50.1 2.50.2 2.50.2 0.30.1 (1) : Input (2) : Ground (3) : Output in mm 5.01.0 s Features 1.50.1 1.30.1 6.0 max. SFELB10M7 series for FM-receivers are monolithic type ceramic filters which use the energy trapped thickness vibration-mode of the piezoelectric ceramic. EIAJ CODE 5 (1) (2) (3) 7.52.0 7.52.0 6.0 max. MARKING MARKING 1.50.1 1.30.1 5.01.0 0.50.1 1.50.1 1.30.1 0.50.1 5.01.0 2.50.2 2.50.2 (1) : Input (2) : Ground (3) : Output in mm (1) (2) (3) 0.30.1 (1) : Input (2) : Ground (3) : Output in mm 7.52.0 2.50.2 2.50.2 (1) : Input (2) : Ground (3) : Output in mm (1) (2) (3) 0.30.1 (1) : Input (2) : Ground (3) : Output in mm 2.50.2 2.50.2 0.30.1 3.01.0 SFELB10M7JA00-B0 SFELB10M7HA00-B0 (1) (2) (3) 7.52.0 6.0 max. MARKING MARKING 1.50.1 1.30.1 5.01.0 0.50.1 1.50.1 1.30.1 0.50.1 5.01.0 2.50.2 2.50.2 0.30.1 3.01.0 SFELB10M7GA00-B0 SFELB10M7FA00-B0 (1) (2) (3) Part Number SFELB10M7KA00-B0 SFELB10M7JA00-B0 SFELB10M7HA00-B0 SFELB10M7GA00-B0 SFELB10M7FA00-B0 Center Frequency (fo) (MHz) 10.700 30kHz 10.700 30kHz 10.700 30kHz 10.700 30kHz 10.700 30kHz 3dB Bandwidth (kHz) within110 30kHz within150 40kHz within180 40kHz within230 50kHz within280 50kHz Attenuation (kHz) 350 max. 360 max. 470 max. 570 max. 650 max. Insertion Loss (dB) within7.0 2.0dB within4.5 2.0dB within3.5 2.0dB within3.0 2.0dB within3.0 2.0dB Spurious Attenuation (dB) 30 min. 35 min. 35 min. 40 min. 30 min. Area of Attenuation : [within 20dB] Area of Spurious Attenuation : [within 9MHz to 12MHz] Center frequency(fo) defined by the center of 3dB bandwidth. 3.01.0 6.0 max. EIAJ CODE EIAJ CODE 3.01.0 6.0 max. EIAJ CODE EIAJ CODE 17 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 s Center Frequency Rank Code CODE D B A C E Z M 30kHz Step 10.64MHz30kHz 10.67MHz30kHz 10.70MHz30kHz 10.73MHz30kHz 10.76MHz30kHz 25kHz Step 10.650MHz25kHz 10.675MHz25kHz 10.700MHz25kHz 10.725MHz25kHz 10.750MHz25kHz Combination A,B,C,D,E Combination A,B,C s Frequency Characteristics SFELB10M7KA00-B0 0 1 8.00 7.50 7.00 Attenuation (dB) 6.50 G.D.T. (sec.) 0 1 2 3 4 5 6 7 SFELB10M7JA00-B0 7.50 7.00 6.50 6.00 5.50 5.00 4.50 4.00 G.D.T. (sec.) G.D.T. (sec.) 5 Attenuation (dB) 2 3 4 5 6 7 6.00 5.50 5.00 4.50 10.620 10.660 10.700 Frequency (MHz) 10.740 10.780 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 SFELB10M7HA00-B0 0 1 2 Attenuation (dB) 3 4 5 6 7 7.00 6.50 6.00 Attenuation (dB) G.D.T. (sec.) 5.50 5.00 4.50 4.00 3.50 0 1 2 3 4 5 6 7 SFELB10M7GA00-B0 6.50 6.00 5.50 5.00 4.50 4.00 3.50 3.00 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 SFELB10M7FA00-B0 0 1 2 Attenuation (dB) 3 4 5 6 7 5.50 5.00 4.50 4.00 3.50 3.00 2.50 2.00 G.D.T. (sec.) 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 18 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 s Frequency Characteristics (Spurious) SFELB10M7KA00-B0 0 10 20 Attenuation (dB) Attenuation (dB) 30 40 50 60 70 8.700 0 10 20 30 40 50 60 70 8.700 SFELB10M7JA00-B0 9.700 10.700 Frequency (MHz) 11.700 12.700 9.700 10.700 Frequency (MHz) 11.700 12.700 SFELB10M7HA00-B0 0 10 20 Attenuation (dB) Attenuation (dB) 30 40 50 60 70 8.700 0 10 20 30 40 50 60 70 8.700 SFELB10M7GA00-B0 5 9.700 10.700 Frequency (MHz) 11.700 12.700 9.700 10.700 Frequency (MHz) 11.700 12.700 SFELB10M7FA00-B0 0 10 20 Attenuation (dB) 30 40 50 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 19 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers CERAFILr Lower Spurious Response Type 7.52.0 EIAJ CODE s Features 1. This type has lower spurious response compared to the standard filters. 2. This types are suitable for higher spurious suppression radio. 1.380.2 1.70.1 0.50.1 5.01.0 2.50.2 2.50.2 3.01.0 (3) (2) (1) 7.52.0 MARKING 7.02.0 EIAJ CODE 7.02.0 2.50.2 2.50.2 3.01.0 3.01.0 (3) (2) (1) 7.52.0 MARKING 7.02.0 EIAJ CODE 7.02.0 2.50.2 2.50.2 3.01.0 3.01.0 (3) (2) (1) SFELA10M7KAB0-B0 7.52.0 6 MARKING EIAJ CODE 1.380.2 1.70.1 5.01.0 0.50.1 0.30.1 1.380.2 1.70.1 0.50.1 5.01.0 2.50.2 2.50.2 0.30.1 SFELA10M7JAB0-B0 SFELA10M7HAB0-B0 (3) (2) (1) 7.52.0 MARKING EIAJ CODE 1.380.2 1.70.1 5.01.0 0.50.1 0.30.1 1.380.2 1.70.1 0.50.1 5.01.0 2.50.2 2.50.2 0.30.1 SFELA10M7GAB0-B0 SFELA10M7FAB0-B0 (3) (2) (1) Part Number SFELA10M7KAB0-B0 SFELA10M7JAB0-B0 SFELA10M7HAB0-B0 SFELA10M7GAB0-B0 SFELA10M7FAB0-B0 Center Frequency (fo) (MHz) 10.700 30kHz 10.700 30kHz 10.700 30kHz 10.700 30kHz 10.700 30kHz 3dB Bandwidth (kHz) within110 30kHz within150 40kHz within180 40kHz within230 50kHz within280 50kHz Attenuation (kHz) 350 max. 380 max. 520 max. 570 max. 650 max. Insertion Loss (dB) 7.0 2.0dB 5.5 2.0dB 5.0 2.0dB 3.0 2.0dB 3.0 2.0dB 0.30.1 Spurious Attenuation (dB) 45 min. 45 min. 45 min. 45 min. 45 min. Area of Attenuation : [within 20dB] Area of Spurious Attenuation : [within 9MHz to 12MHz] Center frequency(fo) defined by the center of 3dB bandwidth. 20 7.02.0 SFELA10M7 series for FM-receivers are monolithic type ceramic filters which use the energy trapped thickness vibration-mode of the piezoelectric ceramic. MARKING Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 s Center Frequency Rank Code CODE D B A C E Z M 30kHz Step 10.64MHz30kHz 10.67MHz30kHz 10.70MHz30kHz 10.73MHz30kHz 10.76MHz30kHz 25kHz Step 10.650MHz25kHz 10.675MHz25kHz 10.700MHz25kHz 10.725MHz25kHz 10.750MHz25kHz Combination A,B,C,D,E Combination A,B,C s Frequency Characteristics SFELA10M7KAB0-B0 0 1 2 Attenuation (dB) 3 4 5 6 7 8.00 7.50 7.00 Attenuation (dB) G.D.T. (sec.) 6.50 6.00 5.50 5.00 4.50 0 1 2 3 4 5 6 7 SFELA10M7JAB0-B0 7.00 6.50 6.00 5.50 5.00 4.50 4.00 3.50 G.D.T. (sec.) 6 10.620 10.660 10.700 Frequency (MHz) 10.740 10.780 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 SFELA10M7HAB0-B0 0 1 2 Attenuation (dB) 3 4 5 6 7 6.50 6.00 5.50 Attenuation (dB) G.D.T. (sec.) 5.00 4.50 4.00 3.50 3.00 0 1 2 3 4 5 6 7 SFELA10M7GAB0-B0 6.00 5.50 5.00 4.50 4.00 3.50 3.00 2.50 G.D.T. (sec.) 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 SFELA10M7FAB0-B0 0 1 2 Attenuation (dB) 3 4 5 6 7 5.00 4.50 4.00 3.50 3.00 2.50 2.00 1.50 G.D.T. (sec.) 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 21 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 s Frequency Characteristics (Spurious) SFELA10M7KAB0-B0 0 10 20 Attenuation (dB) Attenuation (dB) 30 40 50 60 70 0 10 20 30 40 50 60 70 SFELA10M7JAB0-B0 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 SFELA10M7HAB0-B0 0 10 0 10 20 Attenuation (dB) 30 40 50 60 70 SFELA10M7GAB0-B0 6 Attenuation (dB) 20 30 40 50 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 SFELA10M7FAB0-B0 0 10 20 Attenuation (dB) 30 40 50 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 22 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers CERAFILr Wider Band-width Type 7.02.0 EIAJ CODE s Features 1. Realizes wider or narrower band characteristics not obtained by conventional ceramic filters. 2. Temperature characteristics are the best available, the same as those of Murata's conventional ceramic filters. Thus, even in the case of narrow band filters, the center frequency is stable even if temperature changes. 1.380.2 1.70.1 0.50.1 5.01.0 2.50.2 2.50.2 0.30.1 3.01.0 7.02.0 SFELA10M7 Series for FM-receivers are monolithic type ceramic filters which use the energy trapped thickness vibration-mode of the piezoelectric ceramic. MARKING SFELA10M7EA00-B0 (1) : Input (2) : Ground (3) : Output (in mm) (3) (2) (1) 7.02.0 MARKING EIAJ CODE 7.02.0 1.380.2 1.70.1 0.50.1 5.01.0 7 2.50.2 2.50.2 0.30.1 3.01.0 SFELA10M7DF00-B0 (1) : Input (2) : Ground (3) : Output (in mm) (3) (2) (1) Part Number SFELA10M7EA00-B0 SFELA10M7DF00-B0 Nominal Center Frequency (fo) Center Frequency(fn) (MHz) (MHz) 10.700 30kHz 10.700 3dB Bandwidth (kHz) within330 50kHz fn175 min. Attenuation (kHz) 680 max. 950 max. Insertion Loss (dB) within4.0 2.0dB within3.0 2.0dB Spurious Attenuation (dB) 30 min. 20 min. Area of Attenuation : [within 20dB] Area of Spurious Attenuation : [within 9MHz to 12MHz] Center frequency(fo) defined by the center of 3dB bandwidth. (fn) means nominal center frequency. s Center Frequency Rank Code CODE D B A C E Z M 30kHz Step 10.64MHz30kHz 10.67MHz30kHz 10.70MHz30kHz 10.73MHz30kHz 10.76MHz30kHz 25kHz Step 10.650MHz25kHz 10.675MHz25kHz 10.700MHz25kHz 10.725MHz25kHz 10.750MHz25kHz Combination A,B,C,D,E Combination A,B,C 23 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 s Frequency Characteristics SFELA10M7EA00-B0 0 1 2 Attenuation (dB) 4.50 4.00 3.50 Attenuation (dB) G.D.T. (sec.) 3.00 2.50 2.00 1.50 1.00 0 SFELA10M7DF00-B0 4.00 1 2 3.50 3.00 G.D.T. (sec.) 3 4 5 6 3 4 5 2.50 2.00 1.50 6 1.00 0.50 7 7 10.300 10.500 10.700 Frequency (MHz) 10.900 11.100 10.300 10.500 10.700 Frequency (MHz) 10.900 11.100 s Frequency Characteristics (Spurious) SFELA10M7EA00-B0 0 10 20 Attenuation (dB) Attenuation (dB) 0 10 20 SFELA10M7DF00-B0 30 40 50 60 30 40 50 60 7 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 24 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers CERAFILr Narrow Band Type 10.02.0 0.50.1 3.5 -1.0 +1.5 SFKLA10M7NF00-B0 0.30.1 2.50.2 2.50.2 5.01.0 (3) (2) (1) in mm 7.0 2.0 E IAJ CODE 5.0 1.0 7.0 2.0 SFELA10M7LFTA/KAH0, SFVLA/SFKLA series realizes narrower band characteristics not obtained by conventional ceramic filters. Besides, low spurious and temperature characteristics is stable. This series suits for European car-audio or AM up conversion use that needs narrow band characteristics. MARKING EIAJ CODE 1.380.2 1.70.1 7.0 2.0 EI AJ CODE 7.0 2.0 MARKI NG MA RK ING 1. 650.1 1. 40. 1 0. 50. 1 0.30. 1 2.50.2 2.50.2 3.0 1.0 (1) : Input (2) : Ground (3) : Output in mm 5.0 1.0 1 .65 0. 1 1 .40 .1 0. 50 .1 0.30. 1 2.50.2 2.50.2 3.0 1.0 (1) : Input (2) : Ground (3) : Output in mm 10.02.0 8 SFVLA10M7MF00-B0 (3) (2) (1 ) SFVLA10M7LF00-B0 (3) (2) (1 ) 7.0 2.0 7.02.0 MARKING 7.0 2.0 MARKING EIAJ CODE EIAJ CODE 1.38 0.2 1.7 0.1 5.01.0 0.5 0.1 1.380.2 1.70.1 0.50.1 5.01.0 2.50.2 2.50.2 0.3 0.1 3.0 1.0 (in mm) (1) Input (2) Ground (3) Output 0.30.1 2.5 2.5 0.2 0.2 7.02.0 (3) (2) (1) 3.01.0 SFELA10M7LFTA01-B0 SFELA10M7KAH0-B0 (1) : Input (2) : Ground (3) : Output (in mm) (3) (2) (1) Part Number SFKLA10M7NF00-B0 SFVLA10M7MF00-B0 SFVLA10M7LF00-B0 SFELA10M7LFTA-B0 SFELA10M7KAH0-B0 Nominal Center Frequency (fo) Center Frequency(fn) (MHz) (MHz) 10.700 15kHz 10.700 30kHz 10.700 10.700 10.700 - 3dB Bandwidth (kHz) 20 min. fn13 min. fn25 min. fn25 min. within110 30kHz Attenuation (kHz) 95 max. 135 max. 200 max. 280 max. 350 max. Insertion Loss (dB) 6.0 max. within5.5 2.5dB within5.5 2.5dB within7.0 2.0dB within7.0 2.0dB Spurious Attenuation (dB) 24 min. 30 min. 30 min. 30 min. 30 min. Area of Attenuation : [within 20dB] Area of Spurious Attenuation : [within 9MHz to 12MHz] 25 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 s Center Frequency Rank Code CODE D B A C E Z M 30kHz Step 10.64MHz30kHz 10.67MHz30kHz 10.70MHz30kHz 10.73MHz30kHz 10.76MHz30kHz 25kHz Step 10.650MHz25kHz 10.675MHz25kHz 10.700MHz25kHz 10.725MHz25kHz 10.750MHz25kHz Combination A,B,C,D,E Combination A,B,C s Frequency Characteristics SFKLA10M7NF00-B0 0 0 1 2 Attenuation (dB) 3 SFVLA10M7MF00-B0 19.0 18.0 17.0 16.0 G.D.T. (sec.) 11.00 10.50 10.00 G.D.T. (sec.) 9.50 9.00 8.50 8.00 7.50 7.00 10.580 10.640 10.700 Frequency (MHz) 10.760 10.820 6.50 Attenuation ( dB ) 4 5 6 15.0 14.0 13.0 12.0 10 10.600 10.650 10.700 Frequency ( kHz ) 10.750 10.800 7 10.620 10.660 10.700 Frequency (MHz) 10.740 10.780 8 0 1 2 Attenuation (dB) 3 SFVLA10M7LF00-B0 13.0 12.0 11.0 G.D.T. (sec.) 10.0 Attenuation (dB) 0 1 2 3 4 5 6 7 6 7 7.00 6.00 8 9 SFELA10M7LFTA01-B0 4 5 9.00 8.00 10.620 10.660 10.700 Frequency (MHz) 10.740 10.780 SFELA10M7KAH0-B0 0 1 2 Attenuation (dB) 8.00 7.50 7.00 6.50 6.00 5.50 5.00 4.50 G.D.T. (sec.) 3 4 5 6 7 10.620 10.660 10.700 Frequency (MHz) 10.740 10.780 26 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 s Frequency Characteristics (Spurious) SFKLA10M7NF00-B0 0 10 20 Attenuation ( dB ) 30 40 50 Attenuation (dB) 0 10 20 30 40 50 60 70 8.700 SFVLA10M7MF00-B0 60 70 9.700 10.200 10.700 Frequency ( MHz ) 11.200 11.700 9.700 10.700 Frequency (MHz) 11.700 12.700 SFVLA10M7LF00-B0 0 0 10 10 20 Attenuation (dB) 30 40 50 60 70 8.700 Attenuation (dB) 20 30 40 50 60 70 80 90 9.700 SFELA10M7LFTA01-B0 9.700 10.700 Frequency (MHz) 11.700 12.700 10.200 10.700 Frequency (MHz) 11.200 11.700 8 SFELA10M7KAH0-B0 0 10 20 Attenuation (dB) 30 40 50 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 27 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers CERAFILr For FM -IF Tuners 9.0 max. E IAJ CODE 9 1. Little dispersion of amplitude characteristics and phase characteristics (G. D. T. characteristics). 2. The SFELA10M7G_X series has G. D. T characteristics and is useful for obtaining low distortion. SFELA10M7F_L series, in these ceramic filters, being in harmony with flatness of G. D. T. , roundness of the amplitude and selectivity characteristics, therefore, these ceramic filters are suitable to high-grade stereo tuners. Even if mismatching condition, they can keep little distortion because of low Qm of ceramic material. The SFELA10M7FA0G series is based on SFELA10M7FA00/GA00/HA00, and it obtains high selectivity with low loss. There is little dispersion of amplitude and G. D. T. characteristics, and low distortion rate can be obtained. 3. All products are inspected for symmetry and roundness of amplitude characteristics, and the flatness of G. D. T. characteristics. 0.5 0. 1 0.3 0.1 2.50.2 2.50.2 4.0 max. (3 ) (2) (1 ) 7.02.0 MARKING EIAJ CODE SFELA10M7JAXE-B0 1.380.2 1.70.1 0.50.1 5.01.0 2.50.2 2.50.2 0.30.1 3.01.0 7.02.0 5.0 1.0 (1) : Input (2) : Ground (3) : Output (in mm) (2) (1) 9.0 max. E IAJ CODE 2.50.2 2.50.2 4.0 max. (3 ) ( 2) (1 ) 7.02.0 MARKING EIAJ CODE s Features 1. 38 0.2 1. 70 .1 SFELA10M7HA0G-B0 (3) 0.5 0. 1 SFELA10M7HAXD-B0 7.02.0 MARKING 7.02.0 EIAJ CODE 0. 30 .1 1.380.2 1.70.1 5.01.0 0.50.1 1.380.2 1.70.1 0.50.1 5.01.0 2.50.2 2.50.2 3.01.0 3.01.0 (1) : Input (2) : Ground (3) : Output (in mm) (3) (2) (1) 0.30.1 2.50.2 2.50.2 0.30.1 7.02.0 5. 01 .0 (1) : Input (2) : Ground (3) : Output (in mm) 1. 38 0 .2 1. 70 .1 SFELA10M7GA0G-B0 SFELA10M7GALM-B0 (3) (2) (1) Continued on the following page. 28 10 .0 max. MA RK ING 10. 0 ma x. SFELA10M7 series for FM-receivers are monolithic type ceramic filters which use the energy trapped thickness vibration-mode of the piezoelectric ceramic. MA RK ING Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. Continued from the preceding page. 9. 0 ma x. 7.02.0 P61E7.pdf 01.10.17 11. 0 ma x. MARKING EI AJ CODE MARKING EIAJ CODE 5.0 1.0 1. 380. 2 1. 70. 1 0. 50.1 1.380.2 1.70.1 0.50.1 5.01.0 2.50.2 2.50.2 0.30.1 0.3 0.1 2.50.2 2.50.2 4.0 max. (1) : Input (2) : Ground (3) : Output in mm 7.02.0 3.01.0 SFELA10M7GAXA-B0 SFELA10M7FA0G-B0 (1) : Input (2) : Ground (3) : Output (in mm) (3) (2 ) (1) (3) (2) (1) 7.02.0 9.0 max. EIAJ CODE E IAJ CODE 5.01.0 0.50.1 0.5 0. 1 0.3 0.1 2.50.2 2.50.2 0.30.1 3.01.0 2.50.2 2.50.2 4.0 max. (1) : Input (2) : Ground (3) : Output in mm SFELA10M7GALP03-B0 (1) : Input (2) : Ground (3) : Output (in mm) SFELA10M7GAXX-B0 (3) (2) (1) (3) (2) (1 ) 7.02.0 MARKING EIAJ CODE 7.02.0 5.0 1.0 1.380.2 1.70.1 1. 38 0.2 1. 70 .1 11. 0 ma x. MARKING 7.02.0 MA RK ING 1.380.2 1.70.1 0.50.1 5.01.0 9 2.50.2 2.50.2 0.30.1 3.01.0 SFELA10M7FALL-B0 (1) : Input (2) : Ground (3) : Output (in mm) (3) (2) (1) Part Number SFELA10M7JAXE-B0 SFELA10M7HA0G-B0 SFELA10M7HAXD-B0 SFELA10M7GA0G-B0 SFELA10M7GALM-B0 SFELA10M7GAXA-B0 SFELA10M7FA0G-B0 SFELA10M7GALP03-B0 SFELA10M7GAXX-B0 SFELA10M7FALL-B0 Center Frequency (fo) 3dB Bandwidth Attenuation Insertion Loss Spurious Attenuation (MHz) (kHz) (kHz) (dB) (dB) 10.700 30kHz 10.700 30kHz 10.700 30kHz 10.700 30kHz 10.700 30kHz 10.700 30kHz 10.700 30kHz 10.700 30kHz 10.700 30kHz 10.700 30kHz within150 30kHz within180 40kHz within180 30kHz within230 50kHz within230 50kHz within220 40kHz within280 50kHz within250 50kHz within250 40kHz within280 50kHz 500 max. 520 max. 530 max. 600 max. 610 max. 650 max. 670 max. 14.0 max. 7.0 max. 14.0 max. 7.0 max. 12.5 max. 10.0 max. 12.0 max. 35 min. 40 min. 33 min. 40 min. 30 min. 30 min. 30 min. 30 min. 25 min. 25 min. GDT Bandwidth (kHz) fo50 min.[within 0.15sec.] fo45 min.[within 0.5sec.] fo60 min.[within 0.15sec.] fo60 min.[within 0.5sec.] fo60 min.[within 0.25sec.] fo80 min.[within 0.15sec.] fo85 min.[within 0.5sec.] fo65 min.[within 0.25sec.] fo110 min.[within 0.2sec.] fo70 min.[within 0.25sec.] 600 max. within9.0 2.0dB 650 max. within4.0 2.0dB 700 max. within7.0 2.0dB Area of Attenuation : [within 20dB] Area of Spurious Attenuation : [within 9MHz to 12MHz] Center frequency(fo) defined by the center of 3dB bandwidth. 29 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 s Center Frequency Rank Code CODE D B A C E Z M 30kHz Step 10.64MHz30kHz 10.67MHz30kHz 10.70MHz30kHz 10.73MHz30kHz 10.76MHz30kHz 25kHz Step 10.650MHz25kHz 10.675MHz25kHz 10.700MHz25kHz 10.725MHz25kHz 10.750MHz25kHz Combination A,B,C,D,E Combination A,B,C s Freq. Characteristics SFELA10M7JAXE-B0 0 1 2 Attenuation (dB) 3 4 5 6 7 5.00 4.75 4.50 Attenuation (dB) G.D.T. (sec.) 4.25 4.00 3.75 3.50 3.25 0 1 2 3 4 5 6 7 SFELA10M7HA0G-B0 6.00 5.50 5.00 4.50 4.00 3.50 3.00 2.50 G.D.T. (sec.) G.D.T. (sec.) G.D.T. (sec.) 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 SFELA10M7HAXD-B0 0 1 4.50 4.25 4.00 Attenuation (dB) G.D.T. (sec.) 3.75 3.50 3.25 3.00 2.75 0 1 2 3 SFELA10M7GA0G-B0 6.00 5.50 5.00 4.50 9 Attenuation (dB) 2 3 4 5 6 7 4 5 6 7 4.00 3.50 3.00 2.50 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 SFELA10M7GALM-B0 0 1 2 Attenuation (dB) 3 4 5 6 7 4.00 3.75 3.50 3.25 3.00 2.75 2.50 2.25 Attenuation (dB) G.D.T. (sec.) 0 1 2 3 4 5 6 7 SFELA10M7GAXA-B0 3.75 3.50 3.25 3.00 2.75 2.50 2.25 2.00 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 Continued on the following page. 30 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. Continued from the preceding page. P61E7.pdf 01.10.17 s Freq. Characteristics SFELA10M7FA0G-B0 0 1 2 Attenuation (dB) 3 5.00 4.50 4.00 Attenuation (dB) 3.50 G.D.T. (sec.) 0 1 2 3 4 5 6 7 SFELA10M7GALP03-B0 3.75 3.50 3.25 3.00 2.75 2.50 2.25 2.00 G.D.T. (sec.) G.D.T. (sec.) 4 5 6 7 3.00 2.50 2.00 1.50 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 SFELA10M7GAXX-B0 0 1 2 Attenuation (dB) 3 4 5 6 7 3.25 3.00 2.75 2.50 2.25 2.00 1.75 1.50 Attenuation (dB) G.D.T. (sec.) 0 1 2 3 4 5 6 7 SFELA10M7FALL-B0 3.25 3.00 2.75 2.50 2.25 2.00 1.75 1.50 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 s Spurious Frequency SFELA10M7JAXE-B0 0 10 20 Attenuation (dB) Attenuation (dB) 30 40 50 60 70 8.700 0 10 20 30 40 50 60 70 9.900 SFELA10M7HA0G-B0 9 9.700 10.700 Frequency (MHz) 11.700 12.700 10.300 10.700 Frequency (MHz) 11.100 11.500 SFELA10M7HAXD-B0 0 10 20 Attenuation (dB) 30 40 50 60 70 8.700 Attenuation (dB) 0 10 20 30 40 50 60 70 8.700 SFELA10M7GA0G-B0 9.700 10.700 Frequency (MHz) 11.700 12.700 9.700 10.700 Frequency (MHz) 11.700 12.700 Continued on the following page. 31 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. Continued from the preceding page. P61E7.pdf 01.10.17 s Spurious Frequency SFELA10M7GALM-B0 0 10 20 Attenuation (dB) 30 40 50 60 70 8.700 Attenuation (dB) 0 10 20 30 40 50 60 70 8.700 SFELA10M7GAXA-B0 9.700 10.700 Frequency (MHz) 11.700 12.700 9.700 10.700 Frequency (MHz) 11.700 12.700 SFELA10M7FA0G-B0 0 10 20 Attenuation (dB) Attenuation (dB) 30 40 50 60 70 8.700 0 10 20 30 40 50 60 70 8.700 SFELA10M7GALP03-B0 9.700 10.700 Frequency (MHz) 11.700 12.700 9.700 10.700 Frequency (MHz) 11.700 12.700 9 0 10 20 Attenuation (dB) 30 40 50 60 70 8.700 SFELA10M7GAXX-B0 0 10 20 Attenuation (dB) 30 40 50 60 70 8.700 SFELA10M7FALL-B0 9.700 10.700 Frequency (MHz) 11.700 12.700 9.700 10.700 Frequency (MHz) 11.700 12.700 32 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers CERAFILr Three-Elements Type SFTLA Series 10.01.0 SFTLA10M7 series for FM-receivers are monolithic type ceramic filters which use the energy trapped thickness vibration-mode of the piezoelectric ceramic. MARKING EIAJ CODE 6.01.0 5.01.0 2.50.2 2.50.2 0.30.1 (1) : Input (2) : Ground (3) : Output in mm (3) (2) (1) 10.01.0 MARKING EIAJ CODE 6.01.0 5.01.0 2.50.2 2.50.2 0.30.1 (1) : Input (2) : Ground (3) : Output in mm (3) (2) (1) 10.01.0 MARKING 6.01.0 EIAJ CODE 3.01.0 3.01.0 s Features 1. It has an excellent shape factor, and it is possible to obtain 1.5 times more excellent selectivity than SFELA10M7 series (by detuning +-300 or 400kHz). 2. Good performance of spurious suppression. 3. Having the same terminal pitch as the SFELA10M7 series, it easily replaces that series. 4. By replacing two SFELA10M7 series filters with one SFTLA10M7 filter,more compact sets can be made. 5. Well-suited for 1-chip ICs. 0.40.1 0.650.1 1.40.1 0.50.1 SFTLA10M7HA00-B0 0.40.1 0.650.1 1.40.1 0.50.1 SFTLA10M7GA00-B0 10 0.40.1 1.40.1 0.50.1 5.01.0 2.50.2 2.50.2 0.30.1 (1) : Input (2) : Ground (3) : Output in mm (3) (2) (1) 0.650.1 SFTLA10M7FA00-B0 Part Number SFTLA10M7HA00-B0 SFTLA10M7GA00-B0 SFTLA10M7FA00-B0 Center Frequency (fo) (MHz) 10.700 30kHz 10.700 30kHz 10.700 30kHz 3dB Bandwidth (kHz) within180 40kHz within230 40kHz within280 50kHz Attenuation (kHz) 550 max. 650 max. 700 max. Insertion Loss (dB) within5.5 2.5dB within6.0 2.0dB within6.0 2.0dB Spurious Attenuation (dB) 50 min. 50 min. 50 min. Area of Attenuation : [within 40dB] Area of Spurious Attenuation : [within 9MHz to 12MHz] Center frequency(fo) defined by the center of 3dB bandwidth. 3.01.0 33 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 s Center Frequency Rank Code CODE D B A C E Z M 30kHz Step 10.64MHz30kHz 10.67MHz30kHz 10.70MHz30kHz 10.73MHz30kHz 10.76MHz30kHz 25kHz Step 10.650MHz25kHz 10.675MHz25kHz 10.700MHz25kHz 10.725MHz25kHz 10.750MHz25kHz Combination A,B,C,D,E Combination A,B,C s Frequency Characteristics SFTLA10M7HA00-B0 0 1 2 Attenuation (dB) 3 4 5 6 7 8.00 7.50 7.00 Attenuation (dB) G.D.T. (sec.) 6.50 6.00 5.50 5.00 4.50 0 1 2 3 4 5 6 7 SFTLA10M7GA00-B0 7.00 6.50 6.00 5.50 5.00 4.50 4.00 3.50 G.D.T. (sec.) 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 SFTLA10M7FA00-B0 0 1 2 Attenuation (dB) 3 4 5 6 7 6.00 5.50 5.00 4.50 4.00 3.50 3.00 2.50 G.D.T. (sec.) 10 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 s Frequency Characteristics (Spurious) SFTLA10M7HA00-B0 0 10 20 Attenuation (dB) 30 40 50 60 70 8.700 Attenuation (dB) 0 10 20 30 40 50 60 70 8.700 SFTLA10M7GA00-B0 9.700 10.700 Frequency (MHz) 11.700 12.700 9.700 10.700 Frequency (MHz) 11.700 12.700 Continued on the following page. 34 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. Continued from the preceding page. P61E7.pdf 01.10.17 s Frequency Characteristics (Spurious) SFTLA10M7FA00-B0 0 10 20 Attenuation (dB) 30 40 50 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 10 35 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Lead Type CERAFILr Test Circuit and Characteristics Data s Test Circuit (1) : Input (2) : Output (3) :Ground R1 (1) (2) (3) Rg R2 S.S.G C RF Voltmeter Rg + R1 = R2 = 330 C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) s Temperature Characteristics Variation (kHz) Variation (kHz) W40 W20 0 Y20 Y40 W2 W1 0 Y1 Y2 W40 W20 0 Y20 Y40 Y20 0 W20 W40 Temperature (C) W60 W80 Y20 3dB Band width 0 W20 W40 Temperature (C) W60 W80 Variation (kHz) Y20 Insertion loss 0 W20 W40 Temperature (C) W60 W80 Variation (dB) Center frequency SFELA10M7GA00-B0 W40 W20 0 Y20 Y40 W2 W1 0 Y1 Y2 W40 W20 0 Y20 Y40 Y20 0 W20 W40 Temperature (C) W60 W80 Y20 3dB Band width 0 W20 W40 Temperature (C) W60 W80 Y20 Insertion loss 0 W20 W40 Temperature (C) W60 W80 Center frequency SFELA10M7HA00-B0 s Matching Conditions Variation (kHz) Variation (dB) 10 *When using ceramic filters, it is most important to match the input/output load to impedance 330 ohm (only SFELA10M7DF00-B0 is 470 ohm matching). Waveform symmetry is damaged when reactance is added to the input/output load. *Two ceramic filters directly connected can be used for high selelctivity. For reducing waveform variation, it is recommended to input a buffer AMP between ceramic filters. *The SFELA10M7 and SFTLA10M7 series are of input/output symmetric structure so that in theory there is no input/output directionality. Actual circuits may use different input/output loading conditions (for example, mismatched impedance) or capacitance load. In such cases, the waveform will be a little changed by the direction of the input/output of the ceramic filters. 36 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Lead Type CERAFILr Characteristics Data and Notice s Loaded Resistance and Waveform (Rg+R1=330ohm) SFELA10M7GA00-B0 Group Delay Time (sec.) 0 1 2 3 4 5 6 7 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) R2=560 0 1 2 3 4 5 6 7 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) Attenuation (dB) 0 1 2 3 4 5 6 7 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) R2=1k 0 1 2 3 4 5 6 7 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) Attenuation (dB) Group Delay Time (sec.) Group Delay Time (sec.) Group Delay Time (sec.) Group Delay Time (sec.) R2=220 Attenuation (dB) R2=330 Attenuation (dB) s Loaded Capacitance and Waveform (Rg+R1=R2=330ohm) SFELA10M7GA00-B0 0 1 2 3 4 5 6 7 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) C=56pF 0 1 2 3 4 5 6 7 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) Attenuation (dB) Group Delay Time (sec.) C=10pF Attenuation (dB) C=33pF 0 1 2 3 4 5 6 7 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) C=82pF 0 1 2 3 4 5 6 7 1.2 1.0 0.8 0.6 0.4 0.2 0 10.5 10.6 10.7 10.8 10.9 Frequency (MHz) Attenuation (dB) Attenuation (dB) s Notice (Soldering and Mounting) The component cannot be withstand washing. Group Delay Time (sec.) Group Delay Time (sec.) 10 chlorine content, in flow soldering. 6. In case of covering discriminator with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated well. 7. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of mis-correlation if there is any deviation, especially stray capacitance, from the test circuit in the specification. s Notice (Handling) 1. Do not use this product with bend. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 2. The component may be damaged when an excess stress will be applied. 3. All kinds of re-flow soldering must not be applied on the component. 4. Do not clean or wash the component as it is not hermetically sealed. 5. Do not use strong acidity flux, more than 0.2wt% 37 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers Discriminators Chip Type CDACV Series 3.40.5 1.50.3 s Features 1. Compact and excellent mechanical strength. 2. Can be combined with various ICs. The IC is determined by the last number in the part number. 3. Stable demodulation characteristics can be obtained without adjustment. 4. The MG type for wide bandwidths and the MC type for narrow bandwidths are available. 5. Stable temperature characteristics. 6. We recommend kits : ceramic discriminator CDACV10M7 series and "CERAFIL" SFECV10M7 of the same frequency rank. CDACV10M7 series forms a resonator on a piezoelectric ceramic substrate. In combination with ICs, this type obtains stable demodulation characteristics in wide bandwidths. 0.90.3 0.90.3 2.60.3 : EIAJ Monthly Code : Rank in mm Part Number CDACV10M7GA001-R0 CDACV10M7GA016-R0 CDACV10M7GA046-R0 CDACV10M7GA069-R0 CDACV10M7CA001-R0 Center Frequency (fo) Recovered Audio 3dB BW Recovered Audio Output Distortion (MHz) (kHz) (mV) (%) 10.700 30kHz 10.700 30kHz 10.700 30kHz 10.700 30kHz 10.700 30kHz fo150 min. 300 min. 330 min. 330 min. fo150 min. 55 min. within60 to 90mV 280 min. 80 min. 55 min. 1.0 max. 0.9 max. 1.5 max. 1.0 max. 1.0 max. IC CX20029 TA8122F LA1832 CXA1538N CX20091 Detection Method Quadrature Quadrature Quadrature Quadrature Quadrature s Center Frequency Rank Code CODE D B A C E Z M 30kHz Step 10.64MHz30kHz 10.67MHz30kHz 10.70MHz30kHz 10.73MHz30kHz 10.76MHz30kHz 25kHz Step 10.650MHz25kHz 10.675MHz25kHz 10.700MHz25kHz 10.725MHz25kHz 10.750MHz25kHz 11 Combination A,B,C,D,E Combination A,B,C s Standard Land Pattern Dimensions 1.5 1.5 2.6 1.4 1.5 1.4 38 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 s CDACV10M7GA001-R0 Test Circuit 1000 AFC Frequency Characteristics 100 REF 5 280 Fg=50 0.01 39 CX20029 9 CDALA10M7GA001 28 33 32 + 100k 1 - AF OUTPUT Recovered AF Output Voltage (mV) 100 AF Output 10 Vcc=+3.0V Unit R: C:F 10 Distortion 1 1 0.1 Input signal conditions Input Level Mod. Freq. Freq.Dev. 100dB 1000Hz 22.5kHz 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 s CDACV10M7GA016-R0 Test Circuit VCC +3V DC Out AF Out 330p 1k 2.5 1000 Frequency Characteristics 100 + 0.033 24 23 22 21 20 19 18 17 16 15 14 13 Recovered AF Output Voltage (mV) 0.1 24k 100 AF Output 10 TA8122F (TOSHIBA) 1 2 3 4 22 5 + 6 7 0.022 8 9 10 11 12 CDACV10M7GA016 Distortion (%) 1 0.1 Input signal conditions Input Level Mod. Freq. Freq.Dev. 80dB 1000Hz 22.5kHz Distortion (%) S.S.G. IF in SFELA10M7DF00 Unit R: C:F 0.022 270 10 Distortion 1 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 11 s CDACV10M7GA046-R0 Test Circuit AF OUT CSBLA456KE2ZF15 0.01 5.6k AFC + 3.3 6.8k 1 2 Frequency Characteristics 1000 AF Output 100 0.047 1200p + 22 + 1 + 16 15 14 20 19 18 17 0.01 1 24 23 22 21 13 LA1832 3 4 5 6 (SANYO) 7 8 9 10 11 12 100 Recovered AF Output Voltage (mV) 10 300 0.047 IF-IN 75 10 + 0.047 270 CDALA10M7GA046 2.2 3k 1 10 1 + 100 REG Unit R: C:F Vcc (5V) 1 0.1 Input signal conditions Input Level Mod. Freq. Freq.Dev. 112dB 1000Hz 75kHz 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 Continued on the following page. Distortion (%) Distortion 39 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. Continued from the preceding page. P61E7.pdf 01.10.17 s CDACV10M7GA069-R0 Test Circuit CDACV10M7GZ069-B0 VCC (3V) 3.3 2.2k 0.01 + Reg 1000 Frequency Characteristics 100 100 10 + 10 + AF Output 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 CXA1538N 33 4.7 1 2 3 4 5 + 1 AF OUT + + 0.01 0.01 10 Distortion 1 0.022 3.3k 0.022 VCC (3V) 3.3k AFC IF IN Unit R: C:F 1 0.1 Distortion (%) Input signal conditions Input Level 100dB 1000Hz 75kHz Mod.Freq. Freq.Dev. Distortion (%) Input signal conditions Input Level 100dB 1000Hz 22.5kHz Mod.Freq. Freq.Dev. 100 0.01 ++ 6 7 8 9 10 11 12 13 14 15 Recovered AF Output Voltage (mV) 100 10 1 10.4 10.5 10.6 10.7 10.8 10.9 11.0 Frequency (MHz) s CDACV10M7CA001-R0 Test Circuit Vcc 3V AF OUT AFC OUT INPUT S.S.G.(Rg=50) 0.01 280 1000 Frequency Characteristics 10 100 0.022 10 4.7 + + + 28 27 26 25 24 23 + 22 21 20 19 18 17 0.01 10 100 16 15 10 AF Output CX20091 (SONY) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Recovered AF Output Voltage (mV) 10 Distortion 1 100 4.7 + 1000p CDACV10M7CZ001-B0 REG OUT Unit R: C:F 1 0.1 10.4 10.5 10.6 10.7 10.8 10.9 11.0 Frequency (MHz) 11 40 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Chip Type Discriminators CDACV Series Notice s Notice (soldering and mounting) 1. Standard Reflow Soldering Condition (1) Reflow 240 230 Temperature (C) 5sec. Gradual Cooling 150 60 30 Time (sec.) (2) Soldering Iron Lead terminal is directly contacted with the tip of soldering iron of 2805C for 3.00.5 seconds. 2. Wash The component cannot be withstand washing. s Notice (handling) 1. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 2. Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. 3. After installing chips, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to lower. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. 4. When the positioning claws and pick up nozzle are worn, the load is applied to the chip while positioning is concentrated to one positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. 5. When correcting chips with a soldering iron, the tip of the soldering iron should not directly touch the chip component. Depending on the soldering conditions, the effective area of terminations may be reduced. the use of solder containing Ag should be done to prevent the electrode erosion. 6. Do not clean or wash the component as it is not hermetically sealed. 7. In case of covering discriminator with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated well. 8. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of mis-correlation if there is any deviation, especially stray capacitance, from the test circuit in the specification. [Component direction] Put the component lateral to the direction in which stress acts. [Component layout close to board] Perforation B A Slit C Susceptibility to stress is in the order of : A>C>B 11 41 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers Discriminators Chip Low-profile Type CDSCA Series 0.30.2 4.50.1 2.00.1 1.4max 0.40.05 4.1max 1.2max 0.4(ref.) 0.80.1 0.4(ref.) 0.80.1 1.50.1 1.50.1 (in mm) CDSCA10M7 series forms a resonator on a piezo electric ceramic sabstrate. In combination with ICs, this type obtains stable demoduration characteristics in wide bandwidth. 0.20.2 s Features 1. Compact and high reliability and recommended for automotive applications. 2. Can be combined with various ICs. The IC is determined by the last number in the part number. 3. Stable demoduration characteristics can be obtained without adjustment. 4. Stable temperature characteristics. 5. Recommended for Pb free soldering. Part Number CDSCA10M7GF107-R0 Center Frequency (fo) Recovered Audio 3dB BW Recovered Audio Output Distortion (MHz) (kHz) (mV) (%) 10.700 (fn) fn80 min. 52 min. 3.0 max. IC TA31272F Detection Method Quadrature (fn) means nominal center frequency. s Standard Land Pattern Dimensions 3.0 1.0 2.0 1.0 2.6 (in mm) 12 42 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 s Test Circuit Vcc (5.0V) AF OUT 0.01F s Frequency Characteristics 1000 100 0.01F 24 23 22 21 20 19 18 17 16 15 14 13 Recovered AF Output Voltage (mV) TA31272F 1 2 3 4 5 6 7 8 9 10 11 12 100 AF Output 10 1000pF 0.01F 0.01F X 0.1F R C 0.01F S.S.G. 0.1F 10 1 X: CDSCA10M7GF107-B0 R: 1.2 [kohm] C: open Distortion (%) Input signal conditions Input Level Mod. Freq. Freq.Dev. Distortion 1 0.1 100dB 1000Hz 40kHz 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 12 43 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Chip Type Discriminators CDSCA Series Notice s Notice (Soldering and Mounting) 1. Standard Reflow Soldering Condition (1) Reflow 5 sec 260 240 Temperature (C) Gradual Cooling 150 60 60 Time (sec.) (2) Soldering Iron Lead terminal is directly contacted with the tip of soldering iron of +2805C for 3.0 seconds0.5 seconds. 2. Wash The component cannot be withstand washing. s Notice (Handling) 1. The component mounted on the PCB may be damaged if excess mechanical stress is applied. 2. Layout the components on the PCB to minimize the stress imposed by the warp or flexure of the board. 3. After installing components, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to be lower. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. 4. When the positioning claw or pick up nozzle are worn, the excess load is applied to the components while positioning or placing are performed. Careful checking and maintenance are necessary to prevent unexpected trouble. 5. When correcting component's position with a soldering iron, the tip of the soldering iron should not directly touch the chip component. Depending on the soldering conditions, the effective area of terminations may be reduced. The use of solder containing Ag should be considerd to prevent the electrode erosion. 6. Do not clean or wash the component as it is not hermetically sealed. 7. In case of overcoating the part, coating conditions such as material, curing temperature, and so on must be evaluated deeply. 8. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of mis-correlation if there is any deviation, especially stray capacitance, from the test circuit in the specification. [Component direction] Put the component laterally to the direction in which stress acts. [Component layout close to board] Perforation B A Slit C Susceptibility to stress is in the order of : A>C>B 12 44 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Ceramic Filters (CERAFILr) for FM Receivers Discriminators CDALA Series 8.01.0 CDALA10M7 series forms a resonator on a piezoelectric ceramic substrate. In combination with ICs, this type obtains stable demodulation characteristics in wide bandwidths. 0.40.1 Freq. Rank (Color Dot) MARKING EIAJ CODE s Features 1. Compact and excellent mechanical strength. 2. Can be combined with various ICs. The IC is determined by the last number in the part number. 3. Stable demodulation characteristics can be obtained without adjustment. 4. The MG type for wide bandwidths and the MC type for narrow bandwidths are available. 5. Stable temperature characteristics. 6. We recommend combination : ceramic discriminator CDALA10M7 series and "CERAFIL" SFELA10M7 of the same frequency rank. 0.650.1 0.50.1 0.30.1 5.00.2 CDALA10M7G_ Series 3.01.0 5.01.0 5.01.0 (in mm) 8.01.0 Freq. Rank (Color Dot) MARKING EIAJ CODE 0.40.1 0.650.1 0.50.1 0.30.1 5.00.2 3.01.0 5.01.0 CDALA10M7C_ Series 5.01.0 (in mm) Part Number CDALA10M7GA001-B0 CDALA10M7GA016-B0 CDALA10M7GA018-B0 CDALA10M7GA046-B0 CDALA10M7GA048-B0 CDALA10M7GA092-B0 CDALA10M7CA001-B0 CDALA10M7CA005A-B0 CDALA10M7CA040-B0 Center Frequency (fo) Recovered Audio 3dB BW Recovered Audio Output Distortion (MHz) (kHz) (mV) (%) 10.700 30kHz 10.700 30kHz 10.700 30kHz 10.700 30kHz 10.700 30kHz 10.700 30kHz 10.700 30kHz 10.700 30kHz 10.700 30kHz 345 min. 300 min. 300 min. 330 min. 400 min. 300 min. 242 min. 100 min. 130 min. 25 min. within60 to 90mV 60 min. 280 min. 700 min. 60 min. 35 min. 600 min. 40 min. 0.6 max. 0.9 max. 0.9 max. 1.0 max. 1.0 max. 1.0 max. 6.0 max. 0.7 max. IC CX20029 TA8122F TA8132N LA1832 LA1835 TA2132P CX20091 LA7770 TEA5710 Detection Method Quadrature Quadrature Quadrature Quadrature Quadrature Quadrature Quadrature Quadrature Quadrature s Center Frequency Rank Code CODE D B A C E Z M 30kHz Step 10.64MHz30kHz 10.67MHz30kHz 10.70MHz30kHz 10.73MHz30kHz 10.76MHz30kHz 25kHz Step 10.650MHz25kHz 10.675MHz25kHz 10.700MHz25kHz 10.725MHz25kHz 10.750MHz25kHz 13 Combination A,B,C,D,E Combination A,B,C 45 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 s CDALA10M7GA001-B0 Test Circuit 500 AFC Frequency Characteristics REF 5 280 Fg=50 0.01 39 CX20029 9 CDALA10M7GA001 28 33 32 + 100k 1 - AF OUTPUT Recovered AF Output Voltage (mV) AF Output 100 10 S.S.G. Vcc=+3.0V Unit R: C:F 10 1 Distortion 1 0.1 Input signal conditions Input Level Mod. Freq. Freq.Dev. 110dB 400Hz 22.5kHz 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 s CDALA10M7GA016-B0 Test Circuit VCC +3V DC Out AF Out 330p 1k 2.5 500 Frequency Characteristics + 0.033 0.1 24k 100 Recovered AF Output Voltage (mV) AF Output 10 24 23 22 21 20 19 18 17 16 15 14 13 TA8122F (TOSHIBA) 1 2 3 4 22 5 + 6 7 0.022 8 9 10 11 12 CDACV10M7GA016 10 Distortion 1 IF in SFELA10M7DF00 Unit R: C:F 0.022 270 1 0.1 Input signal conditions Input Level Mod. Freq. Freq.Dev. 80dB 1000Hz 22.5kHz 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 s CDALA10M7GA018-B0 Test Circuit CDALA10M7GA018 1k 1F in 270 Vcc 3V DC out AF out 2.2 + 0.033 24k 1000 Frequency Characteristics 100 SFELA10M7DF00 13 0.022 0.1 330p Recovered AF Output Voltage ( mV ) Distortion (%) 10 1 0.1 Input signal conditions Input Level 80 dB Mod. Freq. 1000 Hz Freq. Dev. 22.5 kHz Distortion (%) 100 AF Output 24 23 22 21 20 19 18 17 16 15 14 13 TA8132N (TOSHIBA) 1 2 3 4 5 6 7 8 9 10 11 12 22 + 0.022 Unit R: C:F 10 Distortion Vcc 3V 1 10.4 10.5 10.6 10.7 10.8 10.9 Frequency ( MHz ) 11.0 Continued on the following page. 46 Distortion (%) Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. Continued from the preceding page. P61E7.pdf 01.10.17 s CDALA10M7GA046-B0 Test Circuit AF OUT CSBLA456KE2ZF15 0.01 5.6k AFC + 3.3 6.8k 1 2 Frequency Characteristics 1000 0.01 AF Output 100 0.047 1200p + 22 + 1 + 16 15 14 20 19 18 17 1 Recovered AF Output Voltage ( mV ) 24 23 22 21 13 LA1832 3 4 5 6 (SANYO) 7 8 9 10 11 12 100 10 300 0.047 IF-IN 75 10 + 0.047 CDALA10M7GA046 2.2 1 10 1 + 100 REG Unit R: C:F Vcc (5V) 1 0.1 Input signal conditions Input Level 112 dB Mod. Freq. 1000 Hz Freq. Dev. 75 kHz 10.4 10.5 10.6 10.7 10.8 Frequency ( MHz ) 10.9 11.0 s CDALA10M7GA048-B0 Test Circuit Vt CSBLA456KE2ZF15 33n 1500p AFC 47n 3.3 + 15k 5k 30 29 28 27 26 25 Frequency Characteristics 500 L. P. F. L. P. F. 10 10 ++ 22 21 20 19 18 17 16 33n + 1 24 23 Rch Lch Recovered AF Output Voltage (mV) AF Output 100 10 LA1835 (SANYO) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 300 75 IF-IN 1k 1k 20k 3k + 10 + + 0.47 10 Distortion 1 47n 10 CDALA10M7GA048 REG. VCC(7V) Unit R: C:F 1 0.1 Input signal conditions Input Level Mod. Freq. Freq.Dev. 112dB 1000Hz 75kHz 10.4 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 11.0 s CDALA10M7GA092-B0 Test Circuit DC OUT 2.2 + 20k AF OUT CDALA10M7GZ092-B0 0.033 4.7 + Vcc(3.0V) Recovered AF Output Voltage (mV) 100 AF Output 10 500 Frequency Characteristics 330p Distortion (%) 510 0.047 0.047 + 10 1 Distortion ( % ) 270 3k Distortion 13 1 Distortion (%) Input signal conditions Input Level 80dB 1000Hz 22.5kHz Mod.Freq. Freq.Dev. 16 15 14 13 12 11 10 9 TA2132P(TOSHIBA) 1 2 3 4 5 6 7 8 10 Distortion 4.7 + 270 0.01 IF-IN Unit R: C:F 1 0.1 10.4 10.5 10.6 10.7 10.8 10.9 11.0 Frequency (MHz) Continued on the following page. 47 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. Continued from the preceding page. P61E7.pdf 01.10.17 s CDALA10M7CA001-B0 Test Circuit VCC 5V AF Output AFC IF in 0.01 33 0.1 1000 Frequency Characteristics 100 10 4.7 100 10 + + Recovered AF Output Voltage ( mV ) + + + 0.01 28 27 26 25 24 23 22 21 20 19 CX20090 1 2 3 CDALA10M7CA001 4 5 6 7 8 (SONY) 9 10 18 17 16 15 100 AF Output 10 11 12 13 14 10 1 10 100 1k + Ref. Unit R: C:F Distortion 1 0.1 Input signal conditions Input Level 110 dB Mod. Freq. 400 Hz Freq. Dev. 22.5 kHz 10.4 10.5 10.6 10.7 10.8 Frequency ( MHz ) 10.9 11.0 s CDALA10M7CA005A-B0 Test Circuit 5000 470p 0.1 DC Bias +5.2V 5.6k 0.01 470p 2k Frequency Characteristics 500 DC Bias +5V 0.1 10k 20k 2k 220p 10k 10k Demod.OUT CDALA10M7CA005A 1000 AF Output 100 DATA OUT 20 19 18 17 16 15 14 13 12 11 IC : LA7770 (SANYO) 1 2 3 4 5 6 7 8 9 10 Recovered AF Output Voltage ( mV ) 50 1000p + 0.01 0.01 0.01 33 Vcc=12V 0.022p 5p 0.01 100 10 IF IN Unit R: C:F 10 1 Input signal conditions Input Level 100 dB Mod. Freq. 1000 Hz Freq. Dev. 75 kHz 10.6 10.7 Frequency ( MHz ) 10.8 s CDALA10M7CA040-B0 Test Circuit VCC (3V) 1000 Frequency Characteristics 100 0.01 100 + 22 + 21 10 20 19 + 100 AF-OUT 0.01 + 1 DC-OUT Recovered AF Output Voltage ( mV ) 100 AF Output 10 13 24 23 18 17 16 15 14 13 TEA5710 1 2 3 4 0.22 5 6 (PHILIPS) 7 0.01 280 50 0.22 8 9 10 11 12 Distortion 10 1 S.S.G. Unit R: C:F 1 0.1 Input signal conditions Input Level 100 dB Mod. Freq. 1000 Hz Freq. Dev. 22.5 kHz 10.4 10.5 10.6 10.7 10.8 10.9 11.0 Frequency ( MHz ) 48 Distortion (%) Distortion ( % ) Distortion Distortion ( % ) Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Lead Type Discriminators Notice s Notice (Soldering and Mounting) The component cannot be withstand washing. s Notice (Handling) 1. Do not use this product with bend. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 2. The component may be damaged when an excess stress will be applied. 3. All kinds of re-flow soldering must not be applied on the component. 4. Do not clean or wash the component as it is not hermetically sealed. 5. Do not use strong acidity flux, more than 0.2wt% chlorine content, in flow soldering. 6. In case of covering discriminator with over coat, conditions such as material of resin, cure temperature, and so on should be evaluated well. 7. Accurate test circuit values are required to measure electrical characteristics. It may be a cause of mis-correlation if there is any deviation, especially stray capacitance, from the test circuit in the specification. 13 49 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Packaging s Minimum Quantity Part Number SFECV SFECS SFELA SFELB SFVLA SFKLA SFTLA CDACV / CDSCA CDALA 2,000 1,500 500 Taping o180mm 2,000 2,000 1,500 1,500 1,000 1,500 500 500 500 500 500 Ammo Pack Bulk s Chip Type CERAFILr SFECV Series 1.75T0.1 1.5 W0.1 Y0.0 s Small Chip Type CERAFILr SFECS Series 4.0T0.1 40T0.15 10 pitch accumulated 4.0T0.1 1.55T0.05 2.0T0.05 5.5T0.05 Chip Filter 5.5T0.05 0.3T0.05 4.0T0.1 10 max. 3max. 3.45 Cover film 2.0T0.05 7.3T0.01 3.0T0.1 0.3T0.05 3 max. W0.1 Peeling strengh (0.1Y0.7N) Cover Tape 10 max. 1.7 Y0.05 1.9T0.1 Part number marked side is always facing upside. The feeding holes side of cavity tape is always input terminal. User Direction of Feed User direction of feed * Part Number marked side is always facing upside. * The feeding holes side of cavity tape is always input terminal. (in mm) s Chip Type Discriminator CDACV Series 1.75T0.1 s Chip Type Low-Profile Type Discriminator CDSCA Series 4.00.1 2.00.05 O1.5 +0.1 -0 1.5 Y0.0 W0.1 2.0T0.05 4.0T0.1 12.0T0.2 5.50.05 5.5T0.5 1.750.1 0.3T0.01 3.8T0.1 3.0T0.1 0.3T0.05 1.7 Y0.05 1.9T0.1 4.0T0.1 Peeling strengh (0.1Y0.7N) Cover Tape 10 max. 3m ax . 4.00.1 The cover film peel strength force 0.1~0.7N 10 W0.1 O1.5 +0.1 -0 4.70.1 (9.5) 2.20.1 Cover Film 3max. Part number marked side is always facing upside. User Direction of Feed Part Number marked side is always facing upside Direction of Feed (in mm) Continued on the following page. 13 50 (1.85max.) 0.30.05 1.250.05 12.00.2 2.02T0.1 0.05 4.0T0.1 Chip Filter Peeling strength 0.1~0.7N 3.35T0.1 4.3 12.0T0.2 12.0 +0.08 -0.2 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Packaging Continued from the preceding page. s Lead Type CERAFILr SF_LA Series h h P2 P S1 W2 W0 L2 W F1 F1 P1 F P0 W1 D0 H0 L1 t Item Lead Length under the Hold Down Tape Length of Cat off Pitch of Components Pitch of Sprocket Hole (1) Length from Hole Center to Lead Length from Hole Center to Component Center Pitch of the Terminal (1) Pitch of the Terminal (2) Slant to the Forward or Backward Slant to the Left or Right Width of Carrier Tape Width of Hold Down Tape Position of Sprocket Hole Gap of Hold Down Tape and Carrier Tape Distance Between the Center of Sprocket Hole and Lead Stpper Diameter of Sprocket Hole Total Tape Thickness Pitch of Sprocket Hole (2) Code L1 L2 P P0 P1 P2 F F1 h S1 W W0 W1 W2 H0 D0 t P020 Dimensions 3.0 min. 2.0 max. 12.7 12.7 3.85 6.35 5.0 2.5 0 0 18.0 6.0 min. 9.0 0 18.0 o4.0 0.6 254.0 Tolerance Remarks To distinguish the direction 0.5 0.2 0.5 0.5 +0.5 -0.2 0.2 1.0 1.0 0.5 Must not protrude to the carrier tape 0.5 +0.5 -0 0.5 0.2 0.2 1.5 The pitch of 20 sprocket holes (in mm) Continued on the following page. 13 51 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Packaging Continued from the preceding page. s Lead Type Discriminator CDALA Series h h P2 P S1 W2 W0 W W1 D0 P1 F P0 t Item Code Dimensions Tolerance H0 L1 Remarks Lead length under the hole down tape Pitch of component Pitch of sprocket hole (1) Length from hole center to lead Length from hole center to component center Lead spacing Slant to the forward or backward Slant to the left or right Width of carrier tape Width of hold down tape Position of sprocket hole Gap of hold down tape and Carrier tape Distance between the center of sprocket hole and lead stopper Diameter of sprocket hole Total tape thickness Pitch of sprocket hole (2) L1 P P0 P1 P2 F h S1 W W0 W1 W2 H0 D0 t Po20 3.0 min. 12.7 12.7 3.85 6.35 5.0 0 0 18.0 6.0 min. 9.0 0 18.0 o4.0 0.6 254.0 ---- -- 0.5 0.2 0.5 0.5 +0.5 -0.2 1.0 1.0 0.5 ---- -- 0.5 +0.5 -0.0 0.5 0.2 0.2 1.5 The pitch of 20 sprocket holes (in mm) Hold down tape doesn't exceed the carrier tape 13 52 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Test Circuit of Ceramic Discriminator Part Number CDALA10M7GA001 CDALA10M7GA002 CDALA10M7GA004 CDALA10M7GA005 CDALA10M7GA006 CDALA10M7GA007 CDALA10M7GA008 CDALA10M7GA009 CDALA10M7GA011 CDALA10M7GA012 CDALA10M7GA013 CDALA10M7GA014A CDALA10M7GA015 CDALA10M7GA016 CDALA10M7GA017 CDALA10M7GA018 CDALA10M7GA019 CDALA10M7GA020 CDALA10M7GF021A CDALA10M7GA022 CDALA10M7GA023 CDALA10M7GF024 CDALA10M7GA025 CDALA10M7GA026 CDALA10M7GA027 CDALA10M7GA027N CDALA10M7GA028 CDALA10M7GA029 CDALA10M7GA030 CDALA10M7GA031 CDALA10M7GA032 CDALA10M7GA033 CDALA10M7GA034V CDALA10M7GA035 CDALA10M7GA036 CDALA10M7GA037 CDALA10M7GA038 CDALA10M7GA039 CDALA10M7GA040 CDALA10M7GA041 CDALA10M7GA042 CDALA10M7GA043 CDALA10M7GA044 CDALA10M7GA045 CDALA10M7GA046 CDALA10M7GA047 CDALA10M7GA048 CDALA10M7GA049 CDALA10M7GA050 CDALA10M7GA051 CDALA10M7GA052 CDALA10M7GA053 CDALA10M7GA054 CDALA10M7GA055 CDALA10M7GA056 CDALA10M7GA057 CDALA10M7GA058 CDALA10M7GA059 CDALA10M7GA060 CDALA10M7GA061 IC Manufacturer Sony Sony Rohm Rohm Toshiba Sanyo Toshiba Toshiba Panasonic Sony Panasonic Panasonic Sanyo Toshiba Philips Toshiba Rohm Philips Philips Sanyo Sanyo Philips Telefunken Sanyo Sony Sony Telefunken Philips Philips Toshiba Sony Toshiba Telefunken Philips Toshiba Sanyo Siemens Toshiba Philips Rohm Philips Sanyo Siemens Toshiba Sanyo Philips Sanyo Motorola Toshiba Siemens Motorola Panasonic Sony Philips NEC Toshiba Toshiba Samsung Rohm Philips IC CX20029 CX20076 BA4234L BA4230AF TA7640AP LA1260 TA7303P TA7130P AN7004 CXA1030P AN7007SU AN7006S LA1816 TA8122AN/F TEA5591 TA8132AN/AF BA1440 NE604 TBA229-2 LA1810 LA7770 TDA2557 U829B LA1805 CXA1238 CXA1238N U2501B TBA120U TEA5592 TA2003 CXA1343M TA2007N U4490B TEA5594 TA2029 LA1830 TDA6160X TA8186 TEA5710 BA4220 SA605 LA1831 TDA6160-2X TA2008A/AN LA1832/M SA626 LA1835/M MC13156 TA2022 TDA1576T MC13173 AN7232 CXA1376AM TEA5712T PC1391M TA2057 TA2046 KA2244 BA1448 TEA5762/5757 Part Number CDALA10M7CA001 CDALA10M7CA002 CDALA10M7CA004A CDALA10M7CA005A CDALA10M7CA006 CDALA10M7CA009 CDALA10M7CA040 IC Manufacturer Sony Toshiba Motorola Sanyo Philips Toshiba Philips IC CX20091 TA7687P/F MC3356P LA7770 TEA5591 TA7640AP TEA5710 Part Number CDALA10M7GF062 CDALA10M7GA063 CDALA10M7GA064 CDALA10M7GA065 CDALA10M7GA066 CDALA10M7GA067 CDALA10M7GA068 CDALA10M7GA069 CDALA10M7GA070 CDALA10M7GA071 CDALA10M7GF072 CDALA10M7GA073 CDALA10M7GA075 CDALA10M7GA076 CDALA10M7GA077 CDALA10M7GA078 CDALA10M7GA079 CDALA10M7GA080 CDALA10M7GA080A CDALA10M7GA081 CDALA10M7GA082 CDALA10M7GA083 CDALA10M7GA084 CDALA10M7GA085 CDALA10M7GA086 CDALA10M7GA087 CDALA10M7GA088 CDALA10M7GA089 CDALA10M7GA090 CDALA10M7GA091 CDALA10M7GA092 CDALA10M7GA092D CDALA10M7GA093 CDALA10M7GA094 CDALA10M7GA095 CDALA10M7GA096 CDALA10M7GA097 CDALA10M7GA098 CDALA10M7GA100 CDALA10M7GA100A CDALA10M7GA101 CDALA10M7GA102 CDALA10M7GA103 CDALA10M7GA104 CDALA10M7GA105A CDALA10M7GA106 CDALA10M7GF107 CDALA10M7GF108A CDALA10M7GF109 CDALA10M7GA110 IC Manufacturer Toko Samsung Samsung Samsung Rohm Rohm Sony Sony Sanyo Toshiba Toshiba Motorola Sony Sony Toshiba Sony Sanyo Toshiba Toshiba Telefunken Toshiba Sanyo Rohm Philips Sanyo Motorola Toshiba Samsung Samsung Samsung Toshiba Toshiba Sony Sanyo Temic Philips Matsushita Philips Toshiba Toshiba Sanyo Toshiba Samsung Rfmd Philips Fujitsu Toshiba Sanyo Toko Dspg IC TK14581 KA2292 KA2295 KA2298 BA4110 BA4240L CXA1991N CXA1538M/N/S LA1150 TA7765 TA31161 MC13158 CXA1611 CXA3067M TA2111 CX1691M LA1838/M TA2104AFN TA2104F U4313B TA2099N LA1827 BH4126FV SA639 LA1833 MC3363 TA8721ASN KA22425 KA22901 KA2297 TA2132 TA2132BP CXA1111 LA1822 U2765B SA636DK AN6138SH CAA3220TS TA2149N TA2149AN LA1823 TA2142FN KB22902 RF2925 TEA5757HL MB15G611 TA31272FN LA1225M TK14588 DS9RF21 13 53 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Example of Appllied Circuit s LA1140(Automotive Radio) AGC R7 200 C3 0.047 SFELA10M7HAA0-B0 R4 10k R1 100 C1 0.022 R6 SFELA10M7HAA0-B0 330 C.F. VR1 150k C7 0.047 L1 2.2H L2 R14 C8 0.047 Vref. 16 1 12 9 11 13 7 + R13 12k AFC C9 0.047 C10 4.7 + C11 33p FRONT END C.F. 1.8k R2 1.8k R2 1k R3 C2 0.022 R8 330 0.047 C6 2 3 4 5 6 R9 220k 2.2 LA1140 (SANYO) 8 22k R10 + C4 0.047 x 2 C5 14 C14 0.047 15 R12 10 C15 R2 47k C13 33p s CXA1019M(Radio) FM PF FM OSC CERAMIC DISCRIMINATOR FM CERAFIL(R) (SFELA10M7FA00-B0) (CDALA10M7CA001-B0) R W W 8 FM BPF AM ANT 7 FM FRONT END IF FM IF OUT IN 6 14 17 FM/AM BAND SELECT 26 Vcc 13 8 28 REG OUT W 2 FM DISCRI 19 METER 25 RIPPLE FILTER 12 FM IF AMP DETECTOR TUNING METER REGULATOR 13 CXA1019M(SONY) 10 AM FRONT END 5 18 AM IF AMP DETECTOR AM IF IN 20 16 22 W 1 AF PRE/POWER AMP 27 VOL W SP 11 AM OSC 23 DEP OUT 21 W 4 24 AF IN 3 W W AM CERAFIL(R) (SFULA455KU2B-B0) VOL No adjustment is needed the FM detection stage due to use the ceramic discriminator. Continued on the following page. 13 54 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Example of Appllied Circuit Continued from the preceding page. s TA8122F(Radio) IS2236 100k 0.022F 8p 100k CSBLA456KE2ZF16-B0 330p 0.1 ST 22k FM W AM VCO 0.015 0.015 4.7 W W L R 20p 22p 33k L3 L1 5p L2 T1 AM PF IN FM PF 15p OUT Vcc1 FM OSC AM OSC DEF OUT W MPX IN MO LPF1 0.1 10F W LPF2 0.068 24 23 22 21 20 19 18 PRE 17 16 15 OUT L 14 OUT R 4.7 13 FM OSC AM OSC AF Phase COM Phase COM VCO ST DECODER TA8122F(TOSHIBA) AM RF AM MIX FM DET AM/FM MONO SW Freq Divider HYX SW FM RF AM MIX AM AGC AM IF L DET FM IF FM DET TUN LED ST LED FM RF IN 1 GND1 2 FM MIX 3 AM MIX 4 BPF T2 33 AM AGC W 5 Vcc2 6 AM IF IN 7 FM IF IN 8 GND2 0.033 9 10 TUN LED 11 ST LED QUAD 12 560 560 0.022 SFULA455KU2B-B0 SFELA10M7FA00-B0 Detection and MPX stage adjustment ceramic discriminator and ceramic resonator (CERALOCK(R)) 22 10H W CDALA 10M7GA16-B0 Vcc (3V) 13 55 Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. P61E7.pdf 01.10.17 Note: 1. Export Control For customers outside Japan Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons. For customers in Japan For products which are controlled items subject to the "Foreign Exchange and Foreign Trade Law" of Japan, the export license specified by the law is required for export. < < > > 2. Please contact our sales representatives or product engineers before using our products listed in this catalog for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property, or when intending to use one of our products for other applications than specified in this catalog. q Aircraft equipment w Aerospace equipment e Undersea equipment r Power plant equipment t Medical equipment y Transportation equipment (vehicles, trains, ships, etc.) u Traffic signal equipment i Disaster prevention / crime prevention equipment o Data-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed in the above 3. Product specifications in this catalog are as of May 2001. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before your ordering. If there are any questions, please contact our sales representatives or product engineers. 4. Please read CAUTION and Notice in this catalog for safety. This catalog has only typical specifications. Therefore you are requested to approve our product specification or to transact the approval sheet for product specification, before your ordering. 5. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or third party's intellectual property rights and other related rights in consideration of your using our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 6. None of ozone depleting substances (ODS) under the Montreal Protocol is used in manufacturing process of us. http://www.murata.co.jp/products/ Head Office 2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone:81-75-951-9111 International Division 3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan Phone:81-3-5469-6123 Fax:81-3-5469-6155 E-mail:intl@murata.co.jp |
Price & Availability of CDALA10M7GA019
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |