|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
SPICE Device Model SUD15N15-95 Vishay Siliconix N-Channel 150-V (D-S) 175 MOSFET CHARACTERISTICS * N-Channel Vertical DMOS * Macro Model (Subcircuit Model) * Level 3 MOS * Apply for both Linear and Switching Application * Accurate over the -55 to 125C Temperature Range * Model the Gate Charge, Transient, and Diode Reverse Recovery Characteristics DESCRIPTION The attached spice model describes the typical electrical characteristics of the n-channel vertical DMOS. The subcircuit model is extracted and optimized over the -55 to 125C temperature ranges under the pulsed 0 to 10V gate drive. The saturated output impedance is best fit at the gate bias near the threshold voltage. A novel gate-to-drain feedback capacitance network is used to model the gate charge characteristics while avoiding convergence difficulties of the switched Cgd model. All model parameter values are optimized to provide a best fit to the measured electrical data and are not intended as an exact physical interpretation of the device. SUBCIRCUIT MODEL SCHEMATIC This document is intended as a SPICE modeling guideline and does not constitute a commercial product data sheet. Designers should refer to the appropriate data sheet of the same number for guaranteed specification limits. Document Number: 71756 05-Jun-04 www.vishay.com 1 SPICE Device Model SUD15N15-95 Vishay Siliconix SPECIFICATIONS (TJ = 25C UNLESS OTHERWISE NOTED) Parameter Static Gate Threshold Voltage On-State Drain Current b Symbol Test Conditions Simulated Data 2.6 71 0.069 0.115 0.139 0.080 0.89 Measured Data Unit VGS(th) ID(on) VDS = VGS, ID = 250 A VDS = 5 V, VGS = 10 V VGS = 10 V, ID = 15 A V A 0.077 0.081 0.90 V Drain-Source On-State Resistanceb rDS(on) VGS = 10 V, ID = 15 A, TJ = 125C VGS = 10 V, ID = 15 A, TJ = 175C VGS = 6 V, ID = 10 A Forward Voltageb VSD IS = 15 A, VGS = 0 V Dynamic a Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Chargec Gate-Source Chargec Gate-Drain Chargec Turn-On Delay Timec Rise Timec Turn-Off Delay Timec Fall Time c Ciss Coss Crss Qg Qgs Qgd td(on) tr td(off) tf trr IF = 15 A, di/dt = 100 A/s VDD = 75 V, RL = 5 ID 15 A, VGEN = 10 V, RG = 2.5 VDS = 75 V, VGS = 10 V, ID = 15 A VGS = 0 V, VDS = 25 V, f = 1 MHz 897 126 73 21 5.5 7 12 19 36 41 48 900 115 70 20 5.5 7 8 35 17 30 55 ns nC pF Source-Drain Reverse Recovery Time Notes a. Guaranteed by design, not subject to production testing. b. Pulse test; pulse width 300 s, duty cycle 2%. c. Independent of operating temperature. www.vishay.com 2 Document Number: 71756 05-Jun-04 SPICE Device Model SUD15N15-95 Vishay Siliconix COMPARISON OF MODEL WITH MEASURED DATA (TJ=25C UNLESS OTHERWISE NOTED) Document Number: 71756 05-Jun-04 www.vishay.com 3 |
Price & Availability of SUD15N15-95 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |