View NJW1147_223534.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NJW1147
AUDIO PROCESSOR with BBE ViVA
s GENERAL DESCRIPTION The NJW1147 is a TV audio processor with BBE ViVA High Definition 3D Sound process. BBE's traditional sound clarity enhancement technology is combined with the new ViVA 3D process to create an authentic and exciting spatial effect. BBE ViVA is compatible with news, music and movie programs as well as video games. The NJW1147 contains all necessary functions to process TV audio signal such as volume control, tone control, balance, mute, AGC and NJRC's proprietary surround sound process, eala. The eala reproduces a natural surround sound with clear vocal orientation. 2 The total modes and variables are controlled by the I C bus interface. s PACKAGE OUTLINE
NJW1147M
NJW1147L
s FEATURES q Operating Voltage 8 to 13V 2 q I C BUS Interface q BBE Sound Enhancement (Low Boost and High Boost: 15dB max.) q BBE ViVA High Definition 3D Sound q eala (NJRC Original Surround) q AGC Circuit (It reduces volume difference among input sources.) q Simulated Surround q Bi-CMOS Technology q Package Outline SDMP30, SDIP30
s BLOCK DIAGRAM
VOL1 ViVA HD3D & eala & Sim ulated Surround VOL1
BBE
TONE
VOL2
I2C Bus Interface
AGC
BBE
TONE
VOL2 Bias
-1-
NJW1147
s PIN FUNCTION
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
INa BBE1a BBE2a BBEOUTa TONE INa TONE-Ha TONE-La OUTa AGC SS-FIL CVB CVA SDA SCL GND
INb BBE1b BBE2b BBEOUTb TONE INb TONE-Hb TONE-Lb OUTb SR-FIL VREF CTH CTL AUX0 AUX1 Vcc
30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Symbol
INa BBE1a BBE2a BBE OUTa TONE INa TONE-Ha TONE-La OUTa AGC SS-FIL CVB CVA SDA SCL GND Ach Input
Function
Ach BBE Filter1 (Process) Ach BBE Filter2 (Lo Contour) Ach Output for the Other Accessories Ach Input From the Other Accessories Ach Treble Filter Ach Bass Filter Ach Output AGC Filter Simulated Stereo Filter Pop Noise Reduction for Volume & Balance Pop Noise Reduction for Volume & Balance SDA Data Input (I2C BUS) SCL Data Input (I C BUS) GND
2
No
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
Symbol
Vcc AUX1 AUX0 CTL CTH VREF SR-FIL OUTb TONE-Lb TONE-Hb TONE INb BBE OUTb BBE2b BBE1b INb Power Supply Pin Auxiliary Output1 Auxiliary Output0
Function
Pop Noise reduction for Bass Control Pop Noise reduction for Treble Control Reference Voltage Surround Filter Bch Output Bch Bass Filter Bch Treble Filter Bch Input from the Other Accessories Bch Output for the Other Accessories Bch BBE Filter2 (Process) Bch BBE Filter1 (Lo Contour) Bch Input
-2-
NJW1147
s ABSOLUTE MAXIMUM RATING (Ta=25C)
PARAMETER Supply Voltage Power Dissipation Operating Temperature Range Storage Temperature Range SYMBOL V
+
RATING 14 700 -20 to +75 -40 to +125
UNIT V mW C C
PD Topr Tstg
s ELECTRICAL CHARACTERISTICS (Ta=25C, V+=9V, Rg=600, RL=47k, Vin=100mVrms/1kHz unless otherwise specified)
PARAMETER Operating Voltage Supply Current Reference Voltage Maximum Input Voltage Maximum Output Voltage Channel Balance Balance Boost A Balance Cut A Balance Boost B Balance Cut B Total Harmonic Distortion Maximum Gain Minimum Gain Channel Separation Output Noise 1 Output Noise 2 AUX Output Voltage SYMBOL V
+
TEST CONDITION
MIN. 8.0
TYP. 9.0 13 4.5 3.0 2.5 0.0 0.0 0.0 0.0 -90 (31.6) -106 (5.0) -
MAX. 13.0 25 5.0 1.5 2.0 -70 2.0 -70 0.5 2.0 -70 -70 -85 (56.2) -96 (15.8) 5.0 0.3
UNIT V mA V Vrms Vrms dB dB dB dB dB % dB dB dB dBV (Vrms) dBV (Vrms) V
ICC VREF VIM VOM GCB BABST BACUT BBBST BBCUT THD GVMAX GVMIN CS VNO1 VNO2 VAUX
No Signal No Signal VOL=-20dB,THD=1% OUTPUT VOL=0dB,THD=1% VOL=0dB CHS="0", BAL="11111" CHS="1", BAL="11111" Vin = 1Vrms CHS="1", BAL="11111" CHS="0", BAL="11111" Vin = 1Vrms Vo=0.5Vrms BW=400Hz to 30kHz VOL= 0dB VOL= MUTE Vin = 2Vrms VOL = 0dB BW=400Hz to 30kHz VOL = MUTE BW = 400Hz to 30kHz Logic Output: High Logic Output: Low
4.0 2.8 -1.5 -2.0 -2.0 -2.0 4.5 0
BW: Band Width
-3-
NJW1147
TONE CONTROL
PARAMETER High Frequency Boost High Frequency Flat High Frequency Cut Low Frequency Boost Low Frequency Flat Low Frequency Cut SYMBOL HFBST HFFLT HFCUT LFBST LFFLT LFCUT TEST CONDITION BCT="1", TREB="1111", f=10kHz TRBE="0000", f=10kHz BCT="0", TRBE="1111", f=10kHz BCB="1", BASS="1111", f=100Hz BASS="0000", f=100Hz BCB="0", BASS="1111", f=100Hz MIN. 12.5 -2.0 -17.5 12.5 -2.0 -17.5 TYP. 15.0 0.0 -15.0 15.0 0.0 -15.0 MAX. 17.5 2.0 -12.5 17.5 2.0 -12.5 UNIT dB dB dB dB dB dB
SUB-TONE CONTROL
PARAMETER High Frequency Boost High Frequency Cut Low Frequency Boost Low Frequency Cut SYMBOL SHFBST SHFCUT SLFBST SLFCUT TEST CONDITION BCST="1", SUB-TREB="11", f=10kHz BCST="0", SUB-TREB="11", f=10kHz BCSB="1", SUB-BASS="11", f=100Hz BCSB="0", SUB-BASS="11", f=100Hz MIN. 2.0 -4.0 2.0 -4.0 TYP. 3.0 -3.0 3.0 -3.0 MAX. 4.0 -2.0 4.0 -2.0 UNIT dB dB dB dB
AGC CONTROL
PARAMETER AGC Boost AGC Flat1 AGC Flat2 AGC Flat3 AGC Flat4 AGC Cut SYMBOL AGCBST AGCFLT1 AGCFLT2 AGCFLT3 AGCFLT4 AGCCUT TEST CONDITION Vin=50mVrms, f=1kHz Vin=150mVrms, f=1kHz Vin=300mVrms, f=1kHz Vin=400mVrms, f=1kHz Vin=540mVrms, f=1kHz Vin=2Vrms, f=1kHz MIN. 1.5 -2.5 -2.5 -2.5 -2.5 -14 TYP. 3.5 0.0 0.0 0.0 0.0 -10 MAX. 5.5 2.5 2.5 2.5 2.5 -6.0 UNIT dB dB dB dB dB dB
BBE
PARAMETER BBE Low Frequency Boost Range BBE High Frequency Boost Range SYMBOL BBELOW BBEHIGH TEST CONDITION BBE-Low="1111", f = 50Hz BBE-High="1111", f = 10KHz MIN. TYP. 15.0 15.0 MAX. UNIT dB dB
SURROUND (SURROUND-ON)
PARAMETER Surround Gain1 Surround Gain2 Surround Gain3 Surround Gain4 Simulated Surround Gain1 Simulated Surround Gain2 SYMBOL SRGAIN1 SRGAIN2 SRGAIN3 SRGAIN 4 SRSIM1 SRSIM2 TEST CONDITION AinAout, f=100Hz SUR0="0", SUR="1" AinBout, f=100Hz SUR0="0", SUR="1" AinAout, f=100Hz SUR0="1", SUR="1" AinBout, f=100Hz SUR0="1", SUR="1" Ain+BinAout, f=1kHz SUR0="1", SUR="0" Ain+BinBout, f=1kHz SUR0="1", SUR="0" MIN. 3.5 -3.0 8.0 5.0 1.0 1.0 TYP. 5.5 -1.0 10.0 7.0 3.0 3.0 MAX. 7.5 1.0 12.0 9.0 5.0 5.0 UNIT dB dB dB dB dB dB
-4-
NJW1147
n I C BUS BLOCK CHARACTERISTICS (SDA, SCL) PARAMETER High Level Input Voltage Low Level Input Voltage High Level Input Current Low Level Input Current Low Level Output Voltage (3mA at SDA pin) Maximum Output Current Maximum Clock Frequency Data Change Minimum Waiting Time Data Transfer Start Minimum Waiting Time Low Level Clock Pulse Width High Level Clock Pulse Width Minimum Start Preparation Waiting Time Minimum Data Hold Time Minimum Data Preparation Time Rise Time Fall Time Minimum Stop Preparation Waiting Time I C BUS Load Condition:
2 2
SYMBOL VIH VIL IIH IIL VOL IOL fSCL tBUF tHD:STA tLOW tHIGH tSU:STA tHD:DAT tSU:DAT tR tF tSU:STO
MIN. 3.0 0 0 -3.0 4.7 4.0 4.7 4.0 4.7 5.0 250 4.0
TYP. -
MAX. 5.0 1.5 10 10 0.4 100 1.0 300 -
UNIT V V A A V mA kHz s s s s s s ns s ns s
Pull up resistance 4k (Connected to +5V) Load capacitance 200pF (Connected to GND)
SDA
tBUF
tR
tF
tHD:STA
SCL
tHD:STA tLOW P S
tHD:DAT
tHIGH
tSU:DAT Sr
tSU:STA
tSU:STO P
-5-
NJW1147
!TERMINAL DESCRIPTION
No.
SYMBOL
FUNCTION
EQUIVALENT CIRCUIT
V+
VOLTAGE
1,30 pin
20k
1 30
INa INb
Ach Input terminal Bch Input terminal
80k
V+/2
Vref
4 8 23 27
BBE OUTa OUTa OUTb BBE OUTb
Ach Output for the Other Accessories Ach Output Bch Output Bch Output for the Other Accessories
50 FB
4, 8 23,27pin
V+/2
5.3 k
10pin
10
SS-FIL
Simulated Stereo Filter terminal
FB
V+/2
2 3 28 29
BBE1a BBE2a BBE2b BBE1b
Ach BBE Filter1 (Process) Ach BBE Filter2 (Lo Contour) Bch BBE Filter2 (Lo Contour) Bch BBE Filter1 (Process)
2,3 28,29pin FB
V+/2
6 25
TONE-Ha TONE-Hb
Treble (tone control) filter terminal
FB
10k
6, 25pin
V+/2
-6-
NJW1147
!TERMINAL DESCRIPTION
No.
SYMBOL
FUNCTION
EQUIVALENT CIRCUIT
VOLTAGE
12k
7 24
TONE-La TONE-Lb
7, 24pin
Bass (tone control) filter terminal
FB
12k
V+/2
9
AGC
Capacitor connection terminal for AGC attack and recovery time setting
9pin 400 4k 400
-
11 12
CVB CVA
Pop Noise Reduction for Volume & Balance
11,12pin
8k
-
5V
13
SDA
I C data terminal
2
4k 8k
13pin
-
5V
14
SCL
I C clock terminal
2
4k 8k
14pin
-
-7-
NJW1147
!TERMINAL DESCRIPTION
No.
SYMBOL
FUNCTION
EQUIVALENT CIRCUIT
VOLTAGE
5 26
TONE INa TONE INb
Ach Input from the Other Accessories Bch Input from the Other Accessories
5,26pin
24k
V+/2
21pin
200k
21
Vref
Reference voltage terminal
V+/2
5V
17 18
AUX0 AUX1
17,18pin Auxiliary 2 values voltage output terminal
0/5V
20 19
CTH CTL
Pop Noise reduction for Bass Control Pop Noise reduction for Treble Control
19pin
36k
-
22
SR-FIL
Surround filter terminal
FB
1.8k
22pin
V+/2
15 16
V+ GND
Ground terminal Supply voltage terminal
-
-
-8-
NJW1147
s APPLICATION CIRCUIT
4.7 1 3.3n 33n 4.7 4.7 4.7n 100n 4.7 8 1 100n 4.7 4.7 9 10 11 12 13 14 15 OUTa AGC SS-FIL CVB CVA SDA SCL GND OUTb SR-FIL VREF CTH CTL AUX0 AUX1 Vcc 23 22 21 20 19 18 17 16 2 3 4 5 6 7 INa BBE1a BBE2a BBEOUTa TONEINa TONE-Ha TONE-La INb BBE1b BBE2b 30 29 28
4.7
3.3n 33n 4.7 4.7 4.7n 100n 4.7
BBEOUTb 27 TONEINb TONE-Hb TONE-Lb 26 25 24
100n 4.7 4.7 4.7
22
(NOTE) 2 1. Separate the I C bus line from the following terminals for avoiding digital noise problem. Pin No. Symbol Pin No. Symbol Pin No. Symbol Pin No. Symbol Pin No. 2 BBE1a 6 TONE-Ha 10 SS FIL 24 TONE-Lb 28 3 BBE2a 7 TONE-La 22 SR FIL 25 TONE-Hb 29
Symbol BBE2b BBE1b
2. The constant of capacitors connected to the terminals No.2, 3, 28 and 29 are designated by BBE Sound Inc. And the capacitor connected to the terminal No.22 fixes the BBE ViVA's effects. Do not change the constant of these capacitors without the approval of BBE Sound Inc.
-9-
NJW1147
s APPLICATION NOTE 1. AGC (Auto Gain Control) Circuit AGC circuit adjusts the input signal level with Boost/Attenuate circuit. AGC boost the low input signal level and attenuate high input signal level automatically. 2 The AGC flat levels (150mV, 300mV, 400mV and 540mV) are selectable via I C bus. (Refer to the following figure.)
AGC Control
V+=9V, Vin(Ach+Bch), f=1kHz, Vo(Ach)OUTPUT Rg=600, Ta=25oC 1 Output Voltage [Vrms] 540mV 400mV 0.1 AGC ON 300mV 150mV 0.01 AGC OFF
0.001 0.001
0.01
0.1
1
Input Voltage [Vrms]
Attack-Recovery
Ra=4k
Rb=8k
11pin 12pin
Ir=0.5A
9pin
Cb
Ca
Smoothing circuit of Attenuate
Smoothing circuit of Boost
Attack and recovery time in the attenuation processing depends on external part Ca, and it in the boost processing depends on external part Cb. They become longer as the capacity bigger and become shorter as it gets smaller. (Recommendation value: Ca=1F, Cb=4.7F) Reducing the capacity of Ca may cause the distortion. As for Cb, since it serves as the click noise prevention, reducing the capacity may cause the click noise upon volume changing.
- 10 -
NJW1147
2. Tone Control a) Bass: Setting the Cut-off frequency
Bass Filter 12k 12k
8pin 23pin
fC =
M 2 x C x12k
(15dB) (10dB) (5dB)
M changes by gain setting of Tone. M 2.65 M 3.45 M 8.10
C
b) Treble: Setting the Cut-off frequency
Treble Filter
fC =
N 2 x C x10k
N changes by gain setting of Tone. N 0.76 N 0.58 N 0.25 (15dB) (10dB) (5dB)
10k
7pin 24pin
C
- 11 -
NJW1147
3. BBE, Surround mode and "OUT" switch settings The click noise may be generated by changing the BBE, Surround mode setting and "OUT" switch. Provide the external circuit for avoiding the click noise on above condition.
4. External parts for BBE circuits The constant of capacitors connected to the terminals No.2, 3, 28 and 29 are designated by BBE Sound Inc. And the capacitor connected to the terminal No.22 fixes the BBE ViVA's effects. Do not change the constant of these capacitors without the approval of BBE Sound Inc. 5. AUX1, AUX0 Terminal AUX1/0 are enable to control external logic circuit is Source current : 1mA typ. (Ta=25uC) Sink current : 0.5mA typ. (Ta=25uC) 6. Capacitor for Reference Voltage (21pin) 22F should be recommended for ripple filter connected to Vref terminal (21pin). Reducing this capacity may cause to reduce the maximum attenuation level and to increase the output noise.
- 12 -
NJW1147
s DEFINITION OF I C REGISTER 2 I C BUS FORMAT
MSB LSB MSB LSB MSB LSB
2
S
1bit
Slave Address
8bit
A
1bit
Select Address
8bit
A
1bit
Data
8bit
A
1bit
P
1bit
S: Starting Term A: Acknowledge Bit P: Ending Term SLAVE ADDRESS
MSB LSB
1
0
0
0
0
0
1
R/W
R/W=0: Receive Only R/W=1: No Output Data CONTROL REGISTER TABLE The select address sets each function (Volume, Balance, AGC, Surround, Tone Control, BBE, AUX). The auto increment function cycles the select address as follows. 00H01H02H03H04H05H00H Select Address
BIT D7
CHS BCB BCT BBE (Lo Contour) OUT
Don't care Don't care
D6
D5
D4
VOL BAL BASS TREB
D3
D2
D1
AGC
D0
SUR
00H 01H 02H 03H 04H 05H
BCSB BCST
SUB-BASS SUB-TREB
BBE (Process) SUR0 AGC1 AGC0 AUX1 AUX0
CONTROL REGISTER DEFAULT VALUE Control register default value is all "0". Select Address
BIT D7
0 0 0 0 0 0
D6
0 0 0 0 0 0
D5
0 0 0 0 0 0
D4
0 0 0 0 0 0
D3
0 0 0 0 0 0
D2
0 0 0 0 0 0
D1
0 0 0 0 0 0
D0
0 0 0 0 0 0
00H 01H 02H 03H 04H 05H
- 13 -
NJW1147
!INSTRUCTION CODE a) MASTER VOLUME SETTING
Select Address 00H BIT D7 D6 D5 D4 VOL D3 D2 D1 D0
The volume control for both Ach and Bch (0.33dB/step). The volume is consisted of volume1 and volume2 and the level is divided into half to each volume1 and volume2. b) BALANCE, AGC AND SURROUND SETTING
Select Address 01H BIT D7 CHS D6 D5 D4 BAL D3 D2 D1 AGC D0 SUR
*CHS: Channel select for balance control "0": Ach "Bch is attenuated" "1": Bch "Ach is attenuated" *BAL: Balance control for both Ach and Bch (1dB/Step) The balance is consisted of volume1 and volume2 and the level is divided into half to each volume1 and volume2. *AGC: AGC switch "0": AGC OFF "1": AGC ON *SUR: Surround mode switch "0": Surround OFF "1": Surround ON
NOTE) The click noise may be generated by changing the Surround mode setting. Provide the external circuit for avoiding the click noise on above condition.
c) TONE CONTROL BASS SETTING
Select Address 02H BIT D7 BCB D6 D5 BASS D4 D3 D2 BCSB D1 D0
SUB-BASS
*BCB: Boost cut select for Bass control "0": Cut "1": Boost *BASS: BASS control Cut Level : -15dB to 0dB(1dB/Step) Boost Level : 0dB to +15dB(1dB/Step) *BCSB: Boost cut select for SUB-BASS control "0": Cut "1": Boost *SUB-BASS: SUB- BASS control (1dB/Step) Sub-Cut Level : -3dB to 0dB(1dB/Step) Sub-Boost Level : 0dB to +3dB(1dB/Step)
- 14 -
NJW1147
d) TONE CONTROL TREBLE SETTING
Select Address 03H BIT D7 BCT D6 D5 TREB D4 D3 D2 BCST D1 D0
SUB-TREB
*BCT: Boost cut select for Treble control "0": Cut "1": Boost *TREB: Treble control (1dB/step) Cut Level : -15dB to 0dB(1dB/Step) Boost Level : 0dB to +15dB(1dB/Step) *BCST: Boost cut select for Sub-Treble control "0": Cut "1": Boost *SUB-TREB: Sub-Treble control (1dB/step) Sub-Cut Level : -3dB to 0dB(1dB/Step) Sub-Boost Level : 0dB to +3dB(1dB/Step) e) BBE Boost Level Setting
Select Address 04H BIT D7 D6 D5 D4 D3 D2 D1 D0
BBE (Lo Contour)
BBE (Process)
* BBE Lo Contour * BBE Process
: 0dB to 15dB(1dB/step) : 0dB to 15dB (1dB/step)
When all bits are "0"(=00H), BBE becomes off
NOTE) The click noise may be generated by changing the BBE setting. Provide the external circuit for avoiding the click noise on above condition.
f) OUTPUT AND AUXILIARY SETTING
Select Address 05H BIT D7 OUT D6
Don't Care
D5
Don't Care
D4 SUR0
D3 AGC1
D2 AGC0
D1 AUX1
D0 AUX0
*OUT: ON/OFF Switch for OUTPUT "0" : OFF "1" : ON
NOTE) The click noise may be generated by changing the "OUT" switch. Provide the external circuit for avoiding the click noise on above condition.
*Surround Setting Surround Function Surround OFF BBE ViVA HD3D Sound "eala" Simulated Stereo
SUR0(05H:D4) 0 0 1 1
SUR(01H:D0), 0 1 1 0
Remarks Input through Set the BBE Boost Level NJRC original surround mode For monaural signal input only
NOTE) The click noise may be generated by changing the Surround mode setting. Provide the external circuit for avoiding the click noise on above condition.
- 15 -
NJW1147
*AGC Level Setting AGC Level AGC1(D3) 150mVrms 0 300mVrms 0 400mVrms 1 540mVrms 1 *AUX1/AUX0: Auxiliary port High/Low "0": Logic output "Low" "1": Logic output "High"
AGC0(D2) 0 1 0 1
- 16 -
NJW1147
!MASTER VOLUME (Select Address: 00H)
VOL Gain (dB) 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 -41 -42 HEX FF FC F9 F6 F3 F0 ED EA E7 E4 E1 DE DB D8 D5 D2 CF CC C9 C6 C3 C0 BD BA B7 B4 B1 AE AB A8 A5 A2 9F 9C 99 96 93 90 8D 8A 87 84 81 D7 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 D6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D5 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 D4 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 D3 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 D2 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 D1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 D0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
- 17 -
NJW1147
!MASTER VOLUME (Select Address: 00H)
VOL Gain (dB) -43 -44 -45 -46 -47 -48 -49 -50 -51 -52 -53 -54 -55 -56 -57 -58 -59 -60 -61 -62 -63 -64 -65 -66 -67 -68 -69 -70 -71 -72 -73 -74 -75 -76 -77 -78 -79 -80 -81 -82 -83 -84 Mute HEX 7E 7B 78 75 72 6F 6C 69 66 63 60 5D 5A 57 54 51 4E 4B 48 45 42 3F 3C 39 36 33 30 2D 2A 27 24 21 1E 1B 18 15 12 0F 0C 09 06 03 00 D7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 D5 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 D4 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 D3 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 1 0 0 0 D2 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 D1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 D0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
- 18 -
NJW1147
!BALANCE (Select Address: 01H)
Channel Select (CHS) Ach (Bch is attenuated) Bch (Ach is attenuated) D7 0 1
BAL
Gain (dB) 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 Mute D6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 D5 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 D4 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 D3 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 D2 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
- 19 -
NJW1147
!TONE CONTROL BASS (Select Address: 02H)
Bass Cut or Boost Cut Boost BCB D7 0 1
BASS Cut Gain (dB) -15 -14 -13 -12 -11 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 Boost Gain (dB) 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 D6 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 D5 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 D4 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 D3 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
!TONE CONTROL SUB-BASS (Select Address: 02H)
Sub-Bass Cut or Boost Cut Boost BCSB D2 0 1
SUB-BASS Cut Gain (dB) -3 -2 -1 0 Boost Gain (dB) 3 2 1 0 D1 1 1 0 0 D0 1 0 1 0
- 20 -
NJW1147
!TONE CONTROL TREBLE (Select Address: 03H) Treble Cut or Boost Cut Boost BCT D7 0 1
TREB Cut Gain (dB) -15 -14 -13 -12 -11 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 Boost Gain (dB) 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 D6 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 D5 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 D4 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 D3 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
!TONE CONTROL SUB-TREBLE (Select Address : 03H) Sub-Treble Cut or Boost Cut Boost BCST D2 0 1
SUB-TREB Cut Gain (dB) -3 -2 -1 0 Boost Gain (dB) 3 2 1 0 D1 1 1 0 0 D1 1 0 1 0
- 21 -
NJW1147
!BBE (Lo Contour) / (Process) Gain Code (Select Address: 04H) Lo Contour Gain (dB) 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 D7 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 D6 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 D5 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 D4 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 D3 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 Process D2 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 D1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 D0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
- 22 -
NJW1147
sTYPCAL CHARACTERISTICS
Supply Current vs Supply Voltage
Ta=25oC 15
16
Supply Current vs Temparature
V+=9V
Supply Current [mA]
Supply Current [mA]
10
14
12
5
10
0
0
5
10
15
8
0
50 Temparature [oC]
100
Supply Voltage [V]
Gain vs Volume Control
V+=9V, Vin(Ach)=1Vrms,f=1kHz, OUTPUT,Rg=600
Gain vs Balance Control
V+=9V, Vin=1Vrms, f=1kHz, Rg=600 0
0 -20 -40
-20 -40 Vo(Bch) -60 -80 -100 MUTE -30 -30 75, 25, -20oC Vo(Ach) 75, 25, -20oC
Gain [dB]
-60 -80 -100
75,25,-20 C
o
Gain [dB]
0
-10 -20 -30 -40 -50 -60 -70 -80 MUTE Volume Control [dB]
-20 -10 -20 -10
00
10 -10
20 -20 30 -30
MUT
Balance Control [dB]
Output Noise vs Volume Control
V+=9V, OUTPUT,BW=400-30kHz -60 -70 -80 Gain [dB] -90 -100 -110
Output Noise [dBV] -60
Output Noise vs Temperature
V+=9V, Rg=600, BW=400Hz-30kHz -40
Rg=600, Ta=25oC
Vol=0dB -80
-100 Vol=MUTE
-120
0
-10 -20 -30 -40 -50 -60 -70 -80 MUTE Volume Control [dB]
-120
0
50 Temparature [oC]
100
- 23 -
NJW1147
sTYPCAL CHARACTERISTICS
THD+N vs Input Voltage
V+=9V, Vin(Ach), f=1kHz, Vo(Ach)OUTPUT Rg=600, BW=400Hz-30kHz, Ta=25 oC 100
THD+N vs Input Voltage
V+=9V, Vin(Ach), f=1kHz, Vo(Ach)OUTPUT Rg=600, BW=400Hz-30kHz, Vol=-20dB 100
10 THD+N [ % ]
-30dB THD+N [ % ]
10 -20oC 25oC
1
1
0.1
-20dB -10dB 0dB 0.1 1
0.1 75oC 0.01 0.01 0.1 1
0.01 0.01
Input Voltage [Vrms]
Input Voltage [Vrms]
THD+N vs Output Voltage
V+=9V, Vin(Ach), f=1kHz, Vo(Ach)OUTPUT BW=400Hz-30kHz, Rg=600, Ta=25oC 100 100
THD+N vs Output Voltage
V+=9V, Vin(Ach), f=1kHz, Vo(Ach)OUTPUT Rg=600, BW=400Hz-30kHz, Vol=0dB
10 THD+N [ % ] THD+N [ % ] -30dB 1
10 -20oC 25oC
1
0.1 -20dB 0.1 -10dB 1 0dB
0.1 75 oC 0.01 0.01 0.1 1
0.01 0.01
Output Voltage [Vrms]
Output Voltage [Vrms]
MUTE Level vs Frequency
V+=9V, Vin(Ach)=1Vrms, Vol=MUTE Vo(Ach)OUTPUT, Rg=600, Ta=25oC 120 100 MUTE Level [dB] 80 60 40 20 0 100
Channel Separation vs Frequency
V+=9V, Vin=2Vrms, f=1kHz, Vo=OUTPUT Rg=600, Vol=0dB, Ta=25oC
Channel Separation [dB]
80 60 40 20 0 Vin(Ach)-Vo(Bch) Vin(Bch)-Vo(Ach)
100
1000 Frequency [Hz]
10
4
100
1000 Freqency [Hz]
10
4
- 24 -
NJW1147
sTYPCAL CHARACTERISTICS
Gain vs Frequency (TONE)
V+=9V, Vin(Ach)=0.1Vrms,Gv:3dB steps 20 Vo(Ach), Rg=600, Ta=25oC
Gain vs Frequency (TONE)
V+=9V, Vin(Ach)=0.1Vrms,Gv= +-15dB 20 Vo(Ach), Rg=600, Ta=25oC
C(7,24pin) = 47nF, 100nF, 220nF, 470nF
10 Gain [dB]
10 Gain [dB]
470nF
100nF
0
0
220nF 47nF
-10
-10
-20
100
1000 Frequency [Hz]
10
4
-20
100
1000 Frequency [Hz]
10
4
Gain vs Frequency (TONE)
V+=9V, Vin(Ach)=0.1Vrms,Gv= +-15dB 20 Vo(Ach), Rg=600, Ta=25oC
C(6,25pin) = 1nF, 2.2nF, 4.7nF, 10nF
AGC Control
V+=9V, Vin(Ach+Bch), f=1kHz, Vo(Ach)OUTPUT Rg=600, Ta=25oC 1 540mV 400mV 0.1 300mV
10 Gain [dB]
10nF 2.2nF
0
1nF
Output Voltage [Vrms]
-10
0.01
150mV OFF
4.7nF
-20
100
1000 Frequency [Hz]
10
4
0.001 0.001
0.01
0.1
1
Input Voltage [Vrms]
AGC Attack Time (C:9pin=1 F)
V+=9V, Vin(Ach+Bch)=1Vrms,f=20kHz,Vo(Ach)OUTPUT AGC level=0.15V,Rg=600,Ta=25oC 2
V+=9V, Vin(Ach+Bch)=1Vrms, f=10kHz,Vo(Ach)OUTPUT AGC level=0.15V,Rg=600,Ta=25oC 0.2
AGC Recovery Time (C:9pin=1 F)
Output Voltage [V]
0
Output Voltage [V]
1
0.1
0
-1
-0.1
-2
0
2
4
6
8
10
-0.2
0
100
200
300
400
500
Time [ms]
Time [ms]
- 25 -
NJW1147
sTYPCAL CHARACTERISTICS
AGC Attack Time (C:9pin=2.2 F)
V+=9V, Vin(Ach+Bch)=1Vrms,f=20kHz,Vo(Ach)OUTPUT AGC level=0.15V,Rg=600,Ta=25oC 2
AGC Recovery Time (C:9pin=2.2 F)
V+=9V, Vin(Ach+Bch)=1 to 0.05Vrms, f=10kHz, Vo(Ach)OUTPUT,AGC level=0.15V,Rg=600,Ta=25oC 0.2
Output Voltage [V]
0
Output Voltage [V]
1
0.1
0
-1
-0.1
-2
0
2
4
6
8
10
-0.2
0
100
200
300
400
500
Time [ms]
Time [ms]
AGC Attack Time (C:9pin=0.47 F)
V+=9V, Vin(Ach+Bch)=1Vrms,f=20kHz,Vo(Ach)OUTPUT AGC level=0.15V,Rg=600,Ta=25oC 2
AGC Recovery Time (C:9pin=0.47 F)
V+=9V, Vin(Ach+Bch)=1 to 0.05Vrms, f=10kHz, Vo(Ach)OUTPUT,AGC level=0.15V,Rg=600,Ta=25oC 0.2
Output Voltage [V]
Output Voltage [V]
1
0.1
0
0
-1
-0.1
-2
-0.2 0 2 4 6 8 10 Time [ms]
0
100
200
300
400
500
Time [ms]
- 26 -
NJW1147
sTYPCAL CHARACTERISTICS
Gain vs Frequency (eala&Simulated)
V+=9V, Vin=0.1Vrms,OUTPUT, Rg=600, 20 Ta=25oC
eala AIN-AOUT
Phase vs Frequency (Simulated)
V+=9V, Vin(A+Bch)=0.1Vrms, Rg=600, 200 150 100 50 0 -50 AchOUT Ta=25oC BchOUT
10 Phase [deg]
4
Gain [dB]
0
Simulated (A+B)IN-AOUT eala AIN-BOUT
-10
-20
100
1000 Frequency [Hz]
10
-100
100
1000 Frequency [Hz]
10
4
Gain vs Frequency (BBE)
V+=9V, Vin(Ach)=0.1Vrms,Gv=3dB steps 20 15 Phase [deg] OUTPUT,Rg=600, Ta=25oC 200
Phase vs Frequency (BBE)
V+=9V, Vin(Ach)=0.1Vrms, Vo(Ach) Gv:3dB steps, Rg=600, Ta=25oC +15 100 +3 0 BBE OFF +15 -100
Gain [dB]
10
5 0
BBE OFF
+3
4
-5
100
1000 Frequency [Hz]
10
-200
100
1000 Frequency [Hz]
10
4
Gain vs Frequency (ViVA)
V+=9V, Vin=0.1Vrms,OUTPUT, Rg=600, Ta=25oC, BBE-Low=+5dB, BBE-High=+7dB 20
AIN-AOUT
10 Gain [dB]
0
AIN-BOUT
-10
-20
100
1000 Frequency [Hz]
10
4
- 27 -
NJW1147
sNOTE The NJW1147 is manufactured by New Japan Radio Co., Ltd. under license from BBE Sound Inc. BBE ViVA is a registered trademark of BBE Sound Inc. A license from BBE Sound Inc. is required before the NJW1147 can be purchased from New Japan Radio Co., Ltd. BBE Sound, Inc. 5381 Production Drive Huntington Beach, CA 92649 Tel:(714) 897-6766 Fax:(714) 896-0736 Purchase of I C components of New Japan Radio Co., Ltd or one of its sublicensed Associated Companies 2 2 conveys a license under the Philips I C Patent Rights to use these components in an I C system, provided that 2 the system conforms to the I C Standard Specification as defined by Philips.
2
[CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights.
- 28 -

▲Up To Search▲

Price & Availability of NJW1147

	To Download NJW1147 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .