 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Semiconductor RFD16N06, RFD16N06SM 16A, 60V, 0.047 Ohm, N-Channel Power MOSFET Description These N-Channel power MOSFETs are manufactured using the MegaFET process. This process which uses feature sizes approaching those of LSI integrated circuits, gives optimum utilization of silicon, resulting in outstanding performance. They were designed for use in applications such as switching regulators, switching converters, motor drivers, and relay drivers. These transistors can be operated directly from integrated circuits. Formerly developmental type TA09771. September 1998 Features [ /Title (RFD16 N06, RFD16 N06SM) /Subject 16A, 0V, .047 hm, -Chanel ower OSET) /Author ) /Keyords Harris emionducor, Nhanel ower OSET, O51AA, O52AA) /Cre* 16A, 60V * rDS(ON) = 0.047 * Temperature Compensating PSPICE Model * Peak Current vs Pulse Width Curve * UIS Rating Curve * 175oC Operating Temperature * Related Literature - TB334 "Guidelines for Soldering Surface Mount Components to PC Boards" Symbol Ordering Information PART NUMBER RFD16N06 RFD16N06SM PACKAGE TO-251AA TO-252AA BRAND F16N06 F16N06 SOURCE GATE DRAIN NOTE: When ordering, use the entire part number. Add suffix 9A to obtain the TO-252AA variant in tape and reel, i.e., RFD16N06SM9A. Packaging JEDEC TO-251AA SOURCE DRAIN GATE GATE SOURCE JEDEC TO-252AA DRAIN (FLANGE) DRAIN (FLANGE) CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper ESD Handling Procedures. Copyright (c) Harris Corporation 1998 File Number 4087.1 5-1 RFD16N06, RFD16N06SM Absolute Maximum Ratings TC = 25oC RFD16N06, RFD16N06SM 60 60 16 Refer to Peak Current Curve 20 Refer to UIS Curve 72 0.48 -55 to 175 300 260 UNITS V V A V W W/oC oC oC oC Drain to Source Voltage (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDSS Drain to Gate Voltage (RGS = 20k) (Note 1). . . . . . . . . . . . . . . . . . . . . . . . . . . VDGR Continuous Drain Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ID Pulsed Drain Current (Note 3). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IDM Gate to Source Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGS Pulsed Avalanche Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EAS Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD Linear Derating Factor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TJ, TSTG Maximum Temperature for Soldering Leads at 0.063in (1.6mm) from Case for 10s . . . . . . . . . . . . . . . . . . . . . . . . . . . .TL Package Body for 10s, See Techbrief 334 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tpkg CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTE: 1. TJ = 25oC to 150oC. Electrical Specifications PARAMETER TC = 25oC, Unless Otherwise Specified SYMBOL BVDSS VGS(TH) IDSS TEST CONDITIONS ID = 250A, VGS = 0V VGS = VDS, ID = 250A VDS = Rated BVDSS, VGS = 0V VDS = 0.8 x Rated BVDSS, TC = 150oC MIN 60 2 VGS = 0V to 20V VGS = 0V to 10V VGS = 0V to 2V VDS = 25V, VGS = 0V, f = 1MHz VDD = 48V, ID = 16A, RL = 3, IG(REF) = 0.8mA (Figures 18, 19) TO-251 and TO-252 TYP 14 30 55 30 900 325 100 MAX 4 1 25 100 0.047 65 125 80 45 2.2 2.083 100 UNITS V V A A nA ns ns ns ns ns ns nC nC nC pF pF pF oC/W oC/W Drain to Source Breakdown Voltage Gate Threshold Voltage Zero Gate Voltage Drain Current Gate to Source Leakage Current Drain to Source On Resistance (Note 2) Turn-On Time Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-Off Time Total Gate Charge Gate Charge at 10V Threshold Gate Charge Input Capacitance Output Capacitance Reverse Transfer Capacitance Thermal Resistance Junction to Case Thermal Resistance Junction to Ambient IGSS rDS(ON) tON td(ON) tr td(OFF) tf tOFF Qg(TOT) Qg(10) Qg(TH) CISS COSS CRSS RJC RJA VGS = 20V ID = 16A, VGS = 10V (Figure 9) VDD = 30V, ID 8A, RL = 3.75, VGS = 10V, RG = 25 (Figures 13, 16, 17) Source to Drain Diode Specifications PARAMETER Source to Drain Diode Voltage Diode Reverse Recovery Time NOTES: 2. Pulse test: pulse width 300ms, duty cycle 2%. 3. Repetitive rating: pulse width limited by maximum junction temperature. See Transient Thermal Impedance curve (Figure 3). SYMBOL VSD trr ISD = 16A ISD = 16A, dISD/dt = 100A/s TEST CONDITIONS MIN TYP MAX 1.5 125 UNITS V ns 5-2 RFD16N06, RFD16N06SM Typical Performance Curves 1.2 POWER DISSIPATION MULTIPLIER 1.0 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 TC , CASE TEMPERATURE (oC) 150 175 ID, DRAIN CURRENT (A) 20 16 12 8 4 0 25 50 75 100 125 TC, CASE TEMPERATURE (oC) 150 175 FIGURE 1. NORMALIZED POWER DISSIPATION vs CASE TEMPERATURE FIGURE 2. MAXIMUM CONTINUOUS DRAIN CURRENT vs CASE TEMPERATURE 2 1 ZJC, NORMALIZED THERMAL IMPEDANCE 0.5 0.2 PDM 0.1 0.1 0.05 0.02 0.01 SINGLE PULSE 0.01 10-5 t1 t2 NOTES: DUTY FACTOR: D = t1/t2 PEAK TJ = PDM x ZJC x RJC + TC 10-3 10-2 10-1 t, RECTANGULAR PULSE DURATION (s) 100 101 10-4 FIGURE 3. NORMALIZED MAXIMUM TRANSIENT THERMAL IMPEDANCE 100 ID, DRAIN CURRENT (A) TC = 25oC TJ = MAX RATED IDM, PEAK CURRENT (A) 300 200 VGS = 20V VGS = 10V 100 FOR TEMPERATURES ABOVE 25oC DERATE PEAK CURRENT AS FOLLOWS: I = I25 175 - TC 150 100s 10 1ms OPERATION IN THIS AREA MAY BE LIMITED BY rDS(ON) 1 1 10 VDS, DRAIN TO SOURCE VOLTAGE (V) TC = 25oC TRANSCONDUCTANCE MAY LIMIT CURRENT IN THIS REGION 10 10-5 10-4 10-3 10-2 10-1 t, PULSE WIDTH (s) 100 101 10ms 100ms DC 100 FIGURE 4. FORWARD BIAS SAFE OPERATING AREA FIGURE 5. PEAK CURRENT CAPABILITY 5-3 RFD16N06, RFD16N06SM Typical Performance Curves 100 IAS, AVALANCHE CURRENT (A) Idm STARTING TJ = 25oC ID, DRAIN CURRENT (A) 40 (Continued) 50 VGS = 20V VGS = 10V VGS = 8V VGS = 7V 30 VGS = 6V 20 PULSE DURATION = 250s, TC = 25oC 10 VGS = 5V VGS = 4.5V 0 10 STARTING TJ = 150oC If R = 0 tAV = (L)(IAS)/(1.3 RATED BVDSS - VDD) If R 0 tAV = (L/R)ln[(IAS*R)/(1.3 RATED BVDSS - VDD) +1] 1 0.01 0.1 1 tAV, TIME IN AVALANCHE (ms) 10 0 1 2 3 VDS, DRAIN TO SOURCE VOLTAGE (V) 4 NOTE: Refer to Harris Application Notes AN9321 and AN9322. FIGURE 7. SATURATION CHARACTERISTICS FIGURE 6. UNCLAMPED INDUCTIVE SWITCHING CAPABILITY IDS(ON), DRAIN TO SOURCE CURRENT (A) 50 2.5 NORMALIZED DRAIN TO SOURCE ON RESISTANCE -55oC 175oC 40 VDD = 15V PULSE DURATION = 250s DUTY CYCLE = 0.5% MAX PULSE DURATION = 250s, VGS = 10V, ID = 16A 2.0 25oC 30 1.5 20 1.0 10 0.5 0 0 2 4 6 8 VGS, GATE TO SOURCE VOLTAGE (V) 10 0 -80 -40 0 40 80 120 160 200 TJ, JUNCTION TEMPERATURE (oC) FIGURE 8. TRANSFER CHARACTERISTICS FIGURE 9. NORMALIZED DRAIN TO SOURCE ON RESISTANCE vs JUNCTION TEMPERATURE 2.0 NORMALIZED DRAIN TO SOURCE BREAKDOWN VOLTAGE ID = 250A 2.0 VGS = VDS, ID = 250A 1.5 NORMALIZED GATE THRESHOLD VOLTAGE -40 0 40 80 120 160 TJ , JUNCTION TEMPERATURE (oC) 200 1.5 1.0 1.0 0.5 0.5 0 -80 0 -80 -40 0 40 80 120 160 TJ, JUNCTION TEMPERATURE (oC) 200 FIGURE 10. NORMALIZED DRAIN TO SOURCE BREAKDOWN VOLTAGE vs JUNCTION TEMPERATURE FIGURE 11. NORMALIZED GATE THRESHOLD VOLTAGE vs JUNCTION TEMPERATURE 5-4 RFD16N06, RFD16N06SM Typical Performance Curves 1600 VGS = 0V, f = 1MHz CISS = CGS + CGD CRSS = CGD COSS CDS + CGS CISS 800 COSS 400 CRSS 0 0 5 10 15 20 VDS, DRAIN TO SOURCE VOLTAGE (V) 25 (Continued) 60 VDS , DRAIN TO SOURCE VOLTAGE (V) VDD = BVDSS 45 VDD = BVDSS 7.5 10 VGS , GATE TO SOURCE VOLTAGE (V) C, CAPACITANCE (pF) 1200 30 0.75 BVDSS 0.50 BVDSS 0.25 BVDSS RL = 3.75 IG(REF) = 0.8mA VGS = 10V 0 5.0 15 2.5 0 I G ( REF ) 20 --------------------I G ( AC T ) t, TIME (s) I G ( REF ) 80 --------------------I G ( AC T ) NOTE: Refer to Harris Application Notes AN7254 and AN7260. FIGURE 12. CAPACITANCE vs DRAIN TO SOURCE VOLTAGE FIGURE 13. NORMALIZED SWITCHING WAVEFORMS FOR CONSTANT GATE CURRENT Test Circuits and Waveforms VDS BVDSS L VARY tP TO OBTAIN REQUIRED PEAK IAS VGS DUT tP RG IAS VDD tP VDS VDD + 0V IAS 0.01 0 tAV FIGURE 14. UNCLAMPED ENERGY TEST CIRCUIT FIGURE 15. UNCLAMPED ENERGY WAVEFORMS VDS tON td(ON) tOFF td(OFF) tr tf 90% VGS RL VDS + 90% DUT RGS VGS - VDD 0 10% 90% VGS 0 10% 50% PULSE WIDTH 50% 10% FIGURE 16. SWITCHING TIME TEST CIRCUIT FIGURE 17. RESISTIVE SWITCHING WAVEFORMS 5-5 RFD16N06, RFD16N06SM Test Circuits and Waveforms (Continued) VDS RL VDD VDS Qg(TOT) VGS = 20V VGS + Qg(10) VDD VGS VGS = 2V 0 Qg(TH) Ig(REF) 0 VGS = 10V DUT Ig(REF) FIGURE 18. GATE CHARGE TEST CIRCUIT FIGURE 19. GATE CHARGE WAVEFORM 5-6 RFD16N06, RFD16N06SM PSPICE Electrical Model .SUBCKT RFD16N06 2 1 3 ; CA 12 8 1.788e-10 CB 15 14 1.875e-10 CIN 6 8 8.33e-10 DBODY 7 5 DBDMOD DBREAK 5 11 DBKMOD DPLCAP 10 5 DPLCAPMOD EBREAK 11 7 17 18 64.89 EDS 14 8 5 8 1 EGS 13 8 6 8 1 ESG 6 10 6 8 1 EVTO 20 6 18 8 1 IT 8 17 1 LDRAIN 2 5 1e-9 LGATE 1 9 4.56e-9 LSOURCE 3 7 4.13e-9 GATE 1 EVTO 9 20 + 18 8 LGATE RGATE 6 MOS1 RIN CIN 8 RSOURCE 7 LSOURCE 3 SOURCE rev 10/31/94 DPLCAP 10 5 LDRAIN RSCL1 DRAIN 2 RSCL2 + 51 5 ESCL 51 50 RDRAIN 16 DBREAK ESG + 6 8 VTO + 11 EBREAK 17 18 MOS2 + DBODY 21 MOS1 16 6 8 8 MOSMOD M = 0.99 MOS2 16 21 8 8 MOSMOD M = 0.01 RBREAK 17 18 RBKMOD 1 RDRAIN 50 16 RDSMOD 0.4e-3 RGATE 9 20 3.0 RIN 6 8 1e9 RSCL1 5 51 RSCLMOD 1e-6 RSCL2 5 50 1e3 RSOURCE 8 7 RDSMOD 21.5e-3 RVTO 18 19 RVTOMOD 1 S1A S1B S2A S2B 6 12 13 8 S1AMOD 13 12 13 8 S1BMOD 6 15 14 13 S2AMOD 13 15 14 13 S2BMOD S1A 12 S1B CA + EGS 6 8 EDS 13 8 14 13 13 CB + 14 5 8 S2A 15 S2B RBREAK 17 18 RVTO IT 19 VBAT + VBAT 8 19 DC 1 VTO 21 6 0.82 ESCL 51 50 VALUE = {(V(5,51)/ABS(V(5,51)))*(PWR(V(5,51)*1e6/94,7))} .MODEL DBDMOD D (IS = 2.5e-13 RS = 7.1e-3 TRS1 = 3.04e-3 TRS2 = -10e-6 CJO = 1.12e-9 TT = 5.6e-8) .MODEL DBKMOD D (RS = 2.51e-1 TRS1 = -6.57e-4 TRS2 = 1.66e-6) .MODEL DPLCAPMOD D (CJO = 6.1e-10 IS = 1e-30 N = 10) .MODEL MOSMOD NMOS (VTO = 3.96 KP = 16.68 IS = 1e-30 N = 10 TOX = 1 L = 1u W = 1u) .MODEL RBKMOD RES (TC1 = 1.07e-3 TC2 = -7.19e-7) .MODEL RDSMOD RES (TC1 = 5.45e-3 TC2 = 1.66e-5) .MODEL RSCLMOD RES (TC1 = 1.25e-3 TC2 = 17e-6) .MODEL RVTOMOD RES (TC1 = -5.15e-3 TC2 = -4.83e-6) .MODEL S1AMOD VSWITCH (RON = 1e-5 ROFF = 0.1 VON = -5.25 VOFF= -3.25) .MODEL S1BMOD VSWITCH (RON = 1e-5 ROFF = 0.1 VON = -3.25 VOFF= -5.25) .MODEL S2AMOD VSWITCH (RON = 1e-5 ROFF = 0.1 VON = 0.56 VOFF= 5.56) .MODEL S2BMOD VSWITCH (RON = 1e-5 ROFF = 0.1 VON = 5.56 VOFF= 0.56) .ENDS NOTE: For further discussion of the PSPICE model, consult A New PSPICE Sub-Circuit for the Power MOSFET Featuring Global Temperature Options; authored by William J. Hepp and C. Frank Wheatley. 5-7 |
Price & Availability of RFD16N06
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |