Part Number Hot Search : 
SSD1331 APC5860 GS9078A SHEET 05111 SS100 NJM2822F 74AHC
Product Description
Full Text Search
 

To Download 74LVQ273QSC Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 74LVQ273 Low Voltage Octal D-Type Flip-Flop
April 1998
74LVQ273 Low Voltage Octal D-Type Flip-Flop
General Description
The LVQ273 has eight edge-triggered D-type flip-flops with individual D inputs and Q outputs. The common buffered Clock (CP) and Master Reset (MR) input load and reset (clear) all flip-flops simultaneously. The register is fully edge-triggered. The state of each D input, one setup time before the LOW-to-HIGH clock transition, is transferred to the corresponding flip-flop's Q output. All outputs will be forced LOW independently of Clock or Data inputs by a LOW voltage level on the MR input. The device is useful for applications where the true output only is required and the Clock and Master Reset are common to all storage elements.
Features
n Ideal for low power/low noise 3.3V applications n Implements patented EMI reduction circuitry n Available in SOIC JEDEC, SOIC EIAJ and QSOP packages n Guaranteed simultaneous switching noise level and dynamic threshold performance n Improved latch-up immunity n Guaranteed incident wave switching into 75 n 4 kV minimum ESD immunity
Ordering Code:
Order Number 74LVQ273SC 74LVQ273SJ 74LVQ273QSC Package Number M20B M20D MQA20 Package Description 20-Lead (0.300" Wide) Molded Small Outline Package, SOIC JEDEC 20-Lead Shrink Molded Small Outline Package, SOIC EIAJ 20-Lead (0.150" Wide) Molded Shrink Small Outline Package, SSOP JEDEC
Devices also available in Tape and Reel. Specify by appending suffix letter "X" to the ordering code.
Logic Symbol
Connection Diagram
Pin Assignment for SOIC and QSOP
DS011358-1
IEEE/IEC
DS011358-3
Pin Descriptions
Pin Names D0-D7 MR CP
DS011358-2
Description Data Inputs Master Reset Clock Pulse Input Data Outputs
Q0-Q7
(c) 1998 Fairchild Semiconductor Corporation
DS011358
www.fairchildsemi.com
Absolute Maximum Ratings (Note 1)
Supply Voltage (VCC) DC Input Diode Current (IIK) VI = -0.5V VI = VCC + 0.5V DC Input Voltage (VI) DC Output Diode Current (IOK) VO = -0.5V VO = VCC + 0.5V DC Output Voltage (VO) DC Output Source or Sink Current (IO) DC VCC or Ground Current (ICC or IGND) Storage Temperature (TSTG) DC Latch-up Source or Sink Current -0.5V to +7.0V -20 mA +20 mA -0.5V to VCC + 0.5V -20 mA +20 mA -0.5V to VCC + 0.5V
Recommended Operating Conditions (Note 2)
Supply Voltage (VCC) Input Voltage (VI) Output Voltage (VO) Operating Temperature (TA) Minimum Input Edge Rate V/t VIN from 0.8V to 2.0V VCC @ 3.0V 2.0V to 3.6V 0V to VCC 0V to VCC -40C to +85C
125 mV/ns
50 mA 400 mA -65C to +150C 300 mA
Note 1: The "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The "Recommended Operating Conditions" table will define the conditions for actual device operation. Note 2: Unused inputs must be held HIGH or LOW. They may not float.
DC Electrical Characteristics
Symbol VIH VIL VOH Parameter Minimum High Level Input Voltage Maximum Low Level Input Voltage Minimum High Level Output Voltage VOL Maximum Low Level Output Voltage IIN IOLD IOHD ICC VOLP VOLV VIHD VILD Maximum Input Leakage Current Minimum Dynamic Output Current (Note 4) Maximum Quiescent Supply Current Quiet Output Maximum Dynamic VOL Quiet Output Minimum Dynamic VOL Maximum High Level Dynamic Input Voltage Maximum Low Level Dynamic Input Voltage
Note 3: All outputs loaded; thresholds on input associated with output under test. Note 4: Maximum test duration 2.0 ms, one output loaded at a time. Note 5: Incident wave switching on transmission lines with impedances as low as 75 for commercial temperature range is guaranteed for. Note 6: Worst case package. Note 7: Max number of outputs defined as (n). Data Inputs are driven 0V to 3.3V; one output at GND. Note 8: Max number of Data Inputs (n) switching. (n - 1) inputs switching 0V to 3.3V. Input-under-test switching: 3.3V to threshold (VILD), 0V to threshold (VIHD), f = 1 MHz.
VCC (V) 3.0 3.0 3.0 3.0 3.0 3.0 3.6 3.6 3.6 3.6 3.3 3.3 3.3 3.3
TA = +25C Typ 1.5 1.5 2.99 2.0 0.8 2.9 2.58 0.002 0.1 0.36
TA = -40C to +85C Guaranteed Limits 2.0 0.8 2.9 2.48 0.1 0.44
Units V V V V V V A mA mA A V V V V
Conditions VOUT = 0.1V or VCC - 0.1V VOUT = 0.1V or VCC - 0.1V IOUT = -50 A VIN = VIL or VIH (Note 3) IOH = -12 mA IOUT = 50 A VIN = VIL or VIH (Note 3) IOL = 12 mA VI = VCC, GND VOLD = 0.8V Max (Note 5) VOHD = 2.0V Min (Note 5) VIN = VCC or GND (Notes 6, 7) (Notes 6, 7) (Notes 6, 8) (Notes 6, 8)
0.1
1.0
36 -25
4.0 0.4 -0.3 1.7 1.6 0.8 -0.8 2.0 0.8
40.0
www.fairchildsemi.com
2
AC Electrical Characteristics
TA = +25C Symbol Parameter VCC (V) Min fmax tPLH tPHL tPHL tOSHL tOSLH Maximum Clock Frequency Propagation Delay CP to Qn Propagation Delay CP to Qn Propagation Delay MR to Qn Output to Output Skew (Note 9) 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 50 90 4.0 4.0 4.0 4.0 4.0 4.0 9.6 8.0 10.2 8.5 10.2 8.5 1.0 1.0 17.6 12.5 18.3 13.0 18.3 13.0 1.5 1.5 CL = 50 pF Typ Max TA = -40C to +85C CL = 50 pF Min 45 75 3.0 3.0 3.5 3.5 3.5 3.5 20.0 14.0 20.5 14.5 20.0 14.0 1.5 1.5 ns ns ns ns Max MHz Units
Note 9: Skew is defined as the absolute value of the difference between the actual propagation delay for any two outputs within the same packaged device. The specification applies to any outputs switching in the same direction, either HIGH to LOW (tOSHL) or LOW to HIGH (tOSLH). Parameter guaranteed by design. Not tested.
AC Operating Requirements
Symbol Parameter VCC (V) Typ tS Setup Time, HIGH or LOW Dn to CP tH Hold Time, HIGH or LOW Dn to CP tW Clock Pulse Width HIGH or LOW tW MR Pulse Width HIGH or LOW tW Recovery Time MR to CP 2.7 6.5 5.0 0.0 0.0 7.0 5.5 7.0 5.5 5.0 4.0 3.3 TA = +25C CL = 50 pF TA = -40C to +85C CL = 50 pF Guaranteed Minimum 8.5 6.0 0.0 0.0 8.5 6.0 8.5 6.0 6.5 4.5 ns ns ns ns ns Units
0.3
2.7 3.3
0.3
2.7 3.3
0.3
2.7 3.3
0.3
2.7 3.3
0.3
Capacitance
Symbol CIN CPD (Note 10) Parameter Input Capacitance Power Dissipation Capacitance Typ 4.5 35 Units pF pF Conditions VCC = Open VCC = 3.3V
Note 10: CPD is measured at 10 MHz.
3
www.fairchildsemi.com
4
Physical Dimensions
inches (millimeters) unless otherwise noted
20-Lead (0.300" Wide) Molded Small Outline Package, SOIC JEDEC Package Number M20B
20-Lead Shrink Molded Small Outline Package, SOIC EIAJ Package Number M20D
5
www.fairchildsemi.com
74LVQ273 Low Voltage Octal D-Type Flip-Flop
Physical Dimensions
inches (millimeters) unless otherwise noted (Continued)
20-Lead (0.150" Wide) Molded Shrink Small Outline Package, SSOP JEDEC (also known as QSOP) Package Number MQA20
LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or sysdevice or system whose failure to perform can be reatems which, (a) are intended for surgical implant into sonably expected to cause the failure of the life support the body, or (b) support or sustain life, and (c) whose device or system, or to affect its safety or effectiveness. failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user.
Fairchild Semiconductor Corporation Americas Customer Response Center Tel: 1-888-522-5372 Fairchild Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 8 141-35-0 English Tel: +44 (0) 1 793-85-68-56 Italy Tel: +39 (0) 2 57 5631 Fairchild Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: +852 2737-7200 Fax: +852 2314-0061 National Semiconductor Japan Ltd. Tel: 81-3-5620-6175 Fax: 81-3-5620-6179
www.fairchildsemi.com
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications.


▲Up To Search▲   

 
Price & Availability of 74LVQ273QSC

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X