 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 5 .064 [1.626]MAX .26 [6.604]MAX 4 WHERE SHOWN, USING A PERMANENT MARKING METHOD MARK PART NUMBER AND REVISION BOTTOM CORE LOCATED AS SHOWN 6 APPLY ONE KAPTON TAPE TO COVER THE EDGES OF 6 THE SMT LEADS MUST REST FLAT ON PCB, CO-PLANAR FILL WINDING AND CORE WITH EPOXY 2 PART A&B (600F,315C) 5 REMOVE INSULATION AND TIN LEADS APPROX. 0.1 INCH HELIX WIND 3 TURNS TIGHT TO CORE AND EVENLY SPACED CONSTRUCTION: HI-POT (2 SECOND, 5mA MAX.) 300 VRMS WINDING TO CORE DCR = 4.0 MILLI-OHM, MAX. CURRENT RATING = 12 AMPS DC, MAX L= 2.0 uH 10%, 10 KHz, 0.250 Vrms, 0 AMPS DC SPECIFICATIONS: .35 [8.9] MAX. TOP VIEW 2 KAPTON TAPE .08 [2.0] .26 [6.6] MAX. 6 KAPTON TAPE 2 SCHEMATIC .12 [3.1].03" .1 [2.54].03" SIDE VIEW .20 [5.1] MAX. .08 [2.0] .19 [4.8] FOOT PRINT 2 EPOXY: 2 PARTS A & B (600F, 315C) WIRE: UL RECOGNIZED 200C RATED MAGNET WIRE, JIS C3102 CWS BYTEMARK OR OTHER APPROVED PART, CORE: MPP HELICAL COIL RATING 200C REQUIRED MATERIAL: UL RECOGNIZED 94V-0 FOR FLAMMABILITY COILWS COM, INC 1 CWS Coil Winding Specialist. 12 Amps Output Choke (1.5 mm x 0.4 mm ) |
Price & Availability of CWS-4001A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |