 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Optical disc ICs 4-channel BTL driver for CD players BA5934FP The BA5934FP is a 4-channel BTL driver developed to drive CD player motors and actuators. Perfect for compact applications with the use of the HSOP 28-pin power package. FApplications CD players, CD-ROM FFeatures 1) In addition to internal drivers for the focus coil, tracking coil, and sled motor, it also contains a driver for the loading motor. 2) Perfect for compact applications with the use of the HSOP 28-pin power package. 3) Requires few external components. FAbsolute maximum ratings (Ta = 25_C) 4) Driver gain is adjustable with a single externally connected resistor. 5) Internal thermal shutdown circuit. 6) External mute pin enables the muting of the output current for channel 4. FRecommended operating conditions (Ta = 25_C) 718 Optical disc ICs FBlock diagram BA5934FP FPin descriptions 719 Optical disc ICs FInput / output circuits BA5934FP 720 Optical disc ICs FElectrical characteristics (unless otherwise noted, Ta = 25_C, VCC = 8V, RL = 8, VBIAS = 2.5V) BA5934FP 721 Optical disc ICs FMeasurement circuit BA5934FP 722 Optical disc ICs FCircuit operation (1) Driver block The input is the focus and tracking error signals from the servo pre-amplifier and the control signals for the motor system. The input signal is normally centered at 2.5V, and at the pre-amplifier, it undergoes V / I conversion to generate the current corresponding to the input voltage. This is then passed through a resistor and sent to the internal reference voltage block. BA5934FP This results in the output from the pre-amplifier being the signal at the center of the internal reference voltage. Furthermore, at the V / I conversion, forward and reverse phases are generated and the BTL output is then gained through the driver buffer. 723 Optical disc ICs (2) Output mode switch for loading motor driver (VCC = 8V) BA5934FP Note: Loading driver gain is 0dB. (3) Voltage setting for loading motor driver (ex: forward mode) When setting the output voltage from the loading driver, even if an output voltage is set that exceeds the maximum output voltage with respect to the power supply voltage, the output will not exceed the maximum output voltage. If a voltage is set that is under the maximum output voltage, the example above is applicable. Also, by having the loading input (pin 19) open, the maximum output voltage with respect to the power supply voltage is output. 724 Optical disc ICs FApplication example BA5934FP 725 Optical disc ICs FOperation notes (1) The BA5934FP contains a thermal shutdown circuit. When the chip temperature reaches 175_C (Typ.), the output current is muted. BA5934FP (2) By having the mute pin (pin 7) voltage pulled up to 2.0V or greater, you can mute the output current for channels 1 and 4. For normal conditions, have pin 7 open or at 0.5V or below. The figure below is the timing chart for the high-impedance mute. (3) If the voltage of the bias pin (pin 23) drops below 1.4V (Typ.), outputs are muted. For normal conditions, have the voltage above 1.6V and below 6.5V. (4) If the voltage of the thermal shutdown or bias pin drops, the mute is activated; however, in these situations, only the drivers are muted. Also, the output pin voltage becomes the internal bias voltage (approx. (VCC*VF)/2). (5) Connect a bypass capacitor (approx. 0.1F) between the bases of the power supply pins of this IC. (6) Even though the radiation fins are connected to ground within the package, be sure to also connect them to a ground externally as well. FElectrical characteristic curves 726 Optical disc ICs BA5934FP FExternal dimensions (Units: mm) 727 |
Price & Availability of BA5934FP
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |