 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PHOTOTRANSISTOR OPTICAL SURFACE MOUNT INTERRUPTER SWITCH QVE00033 PACKAGE DIMENSIONS 0.016 (0.40) center of light path 0.049 (1.25) 0.159 (4.05) 0.165 (4.2) 0.079 (2.00) SECTION "A-A" 0.276 (7.00) 0.240 (6.10) "A" 0.146 (3.70) 0.213 (5.40) SCHEMATIC DIMPLE 0.010 (0.25) (4X) "A" 0.295 (7.50) 1 COLLECTOR 0.099 (2.50) EMITTER 4 RIGHT VIEW ANODE 0.020 (0.50) (4X) CATHODE BOTTOM VIEW NOTES: 1. Dimensions for all drawings are in inches (millimeters). 2 3 DESCRIPTION The QVE00033 is a miniature slotted optical switch designed for surface mount applications. It consists of a GaAs LED and a silicon phototransistor facing each other across a 2mm gap, and packaged in a temperature resistant black plastic housing. FEATURES * No contact switching * Transistor Output * Compact surface mount package * Opaque black plastic housing * 2mm wide slot * 0.4 mm aperture width * Tape and reel * Reflow conditions: Preheat = 160C for 120 seconds Reflow = 200C for 60 seconds (peak = 240C) * HL-94V-0 housing (c) 2003 Fairchild Semiconductor Corporation Page 1 of 6 3/19/03 PHOTOTRANSISTOR OPTICAL SURFACE MOUNT INTERRUPTER SWITCH QVE00033 ABSOLUTE MAXIMUM RATINGS (TA = 25C unless otherwise specified) Parameter Operating Temperature Storage Temperature Soldering Temperature (Iron)(2,3,4) Soldering Temperature (Flow)(2,3) Total Power Dissipation EMITTER Continuous Forward Current Reverse Voltage Power Dissipation(1) SENSOR Collector-Emitter Voltage Emitter-Collector Voltage Collector Current Power Dissipation(1) VCEO VECO IC PD 30 4.5 20 75 V V mA mW IF VR PD 50 6 75 mA V mW Symbol TOPR TSTG TSOL-I TSOL-F PTOT Rating -55 to +100 -55 to +100 240 for 5 sec 260 for 10 sec 100 Units C C C C mW ELECTRICAL/OPTICAL CHARACTERISTICS (TA = 25C unless otherwise specified) PARAMETER EMITTER Forward Voltage Reverse Current Peak Emission Wavelength SENSOR Dark Current COUPLED Collector Current Collector Emitter Rise Time Fall Time NOTES 1. Derate power dissipation linearly 1.67 mW/C above 25C. 2. RMA flux is recommended. 3. Methanol or isopropyl alcohols are recommended as cleaning agents. 4. Soldering iron tip 1/16" (1.6mm) from housing. IF = 5 mA, VCE = 5 V IF = 10 mA, IC = 40 A VCC = 5 V, RL = 1000 IC = 100 A IC(ON) VCE (SAT) tr tf 100 -- -- -- -- -- 7 7 600 0.4 150 150 A V s s VCE = 20 V, IF = 0 mA ICEO -- -- 100 nA IF = 20 mA VR = 4 V IF = 20 mA VF IR lPE -- -- -- 1.2 -- 940 1.4 10 -- V A nm TEST CONDITIONS SYMBOL MIN TYP MAX UNITS (c) 2003 Fairchild Semiconductor Corporation Page 2 of 6 3/19/03 PHOTOTRANSISTOR OPTICAL SURFACE MOUNT INTERRUPTER SWITCH QVE00033 Ic(on)-Normalized Collector Current 1.0 .8 .6 Black Shield TA =25C IF=5mA VCE=5V Ic(on)-Normalized Collector Current 1.0 .8 .6 .4 .2 0.0 Normalized to value with shield removed TA =25C IF=5mA VCE=5V Normalized to value with shield removed .4 + E D + Black Shield d1 0 .2 0.0 d2 0 0 1 2 3 4 0 1 d2-Shield Distance (mm) 2 3 d1-Shield Distance (mm) 4 Figure 1. Normalized Collector Current Vs. Shield Distance Figure 2. Normalized Collector Current Vs. Shield Distance 1.4 T =25C A 18 ICE-Normalized Collector Current 1.2 1.0 IF=20mA 16 14 12 10 8 6 4 2 0 0 10 20 30 40 50 TA=25C VCE=5V Normalized to IF=5mA ICE (mA) .8 .6 .4 IF=5mA IF=10mA .2 IF=1mA 0.0 0 2 4 6 VCE (V) 8 10 12 IF-Forward Current (mA) Figure 3. Collector Current Vs. Collector-Emitter Voltage Figure 4. Normalized Collector Current Vs. Forward Current 8 1.0 TA=25C PW=300s PRR=100s VCC=5V Normalized to RL=1k T(off) Normalized T(off) TA=25C PW=300s PRR=100s VCC=5V Normalized to RL=1k T(on) Normalized 6 T(on) .8 4 .6 2 .4 0 0 2 4 6 8 10 .2 0 2 4 6 8 10 RL (k) Figure 5. Rise Time vs. Load Resistance RL (k) Figure 6. Fall Time vs. Load Resistance (c) 2003 Fairchild Semiconductor Corporation Page 3 of 6 3/19/03 PHOTOTRANSISTOR OPTICAL SURFACE MOUNT INTERRUPTER SWITCH QVE00033 RECOMMENDED PRINTED CIRCUIT BOARD PATTERN (For Reference Only) 6mm 2.5mm R=.1mm .5mm Typ 1.9mm Typ (c) 2003 Fairchild Semiconductor Corporation Page 4 of 6 3/19/03 PHOTOTRANSISTOR OPTICAL SURFACE MOUNT INTERRUPTER SWITCH QVE00033 TAPE AND REEL DIMENSIONS R0.24 [R6.0] 0.24 [6.00] R6.5 [R165.0] R6.3 [R160.0] R0.31 [R8.0] B 0.65 [16.5] 3.94 [100.0] O3.54 [O90.0] R1.97 [R50.0] R5.16 [R131.0] R2.17 [R55.0] 0.83 [21.10] 0.09 [2.3] R0.270.047 [R6.751.20] 0.43 [10.75] VIEW B 0.059 [1.50] 0.30 [7.60] 0 [0] min 0.157 [4.00] O0.059 MIN A 0.069 [1.75] 0.256 [6.50] Max 0.232 [5.90] 0.014 [0.35] 0.295 [7.50] 0.476 [12.10] Max 0.630 [16.00] 0.005 [0.127] max 0.378 [9.60] Max COVER TAPE EMBOSSMENT 0.213 [5.40] USER DIRECTION 0.185 [4.70] 0.079 [2.00] 0.472 [12.00] DIMPLE ANODE (PIN1) FACING SPROCKET HOLE Quantitiy of units per reel is 800. VIEW A SCALE: 2:1 UNIT IN CAVITY QVE00033 ASSEMBLY (c) 2003 Fairchild Semiconductor Corporation Page 5 of 6 3/19/03 PHOTOTRANSISTOR OPTICAL SURFACE MOUNT INTERRUPTER SWITCH QVE00033 DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. (c) 2003 Fairchild Semiconductor Corporation Page 6 of 6 3/19/03 |
Price & Availability of QVE00033
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |