 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SDH TRANSPORT Flexible Add/Drop Multiplexer FLX600A Fle xibility and Survivability for SDH-Based Netw ork Ser vices FLX600A is a highly flexible system that can be configured into a number of possible operating modes. It can serve as a hub or a digital cross-connect (DXC) system and is ideal for building advanced ring, linear, and point-to-point networks. The FLX network can be managed efficiently and cost effectively using FLEXR (R) Plus or FLEXR (R) management platforms. This can be done remotely using an X.25 link or an LCN, or locally using a direct connection. Main F eatures * Flexibility and upgradability (including in-service) * Modular plug-in unit design * High survivability against transmission failures (protection of equipment and traffic at the line, path, and unit levels) * Digital cross-connect capability allowing flexible traffic routing * Quick and easy downloading of software upgrades from the network management system * Alarm and performance reporting to the management system * Efficient maintenance operation using orderwire, housekeeping, and 64 kbps user channel Flexib le Configurations Multiplexer : aggregates STM 4/16, 2/34/(45)/140 Mbps tributaries, and STM-1/4 Hubbing (HUB): ideal as a central node Add/Drop (ADM): ideal for linear networks (L-ADM) and ring networks (R-ADM) Terminal (TRM): ideal for point-to-point networks DXC systems: cross connects any pair of signals transferred over STM-1/4/16 lines at any VC level and is ideal for a simple meshed network and for an inter-ring application. FLEXR(R) is a registered trademark of Fujitsu Network Communications, Inc. FLX600A Featur es and Specifications Aggregate Capacity 2 x STM-4 or 2 x STM-16 Tributary Capacity Number of interface ports/unit: 2M: 21 34/45M: 3 Others: 1 Flexible Add/Drop Multiplexer Network Management Interfaces Local terminal interface: NMS interface: Protection Unit protection Traffic 2M(3:1)/34M, (45M), 140M, STM-1 electrical (1+1) 1+1 MSP protection: STM-1 optical, STM-4 VC path protection: VC-12, VC-3, or VC-4 V.24 X.25/LCN Maximum number of each interface port: (Protected/unprotected) 126 x 2M, 6 x 34M, (6 x 45M), 4 x 140M, 4 x STM-1 electrical, 5 x STM-1 optical, 1 x STM-4 Input Voltage Range -48/-60 V DC nominal Power Consumption STM-4 linear ADM with 2M x 126 (3:1) and STM-1 electrical (1+1) x 2 and STM-4 (1+1) x 1 tributaries: 330 W Shelf Dimensions 875 (H) x 450 (W) x 280 (D) mm Temperature Range 0 to 45C Relative Humidity Up to 95% at 25C Specifications subject to change without notice. 1 x STM 4/1 plus an additional STM-4 of capacity configured among the interface options above, subject to some restrictions. Cross-Connect Level VC-12, VC-3, and VC-4 Cross-Connect Capacity 16 x STM-1 equivalent (1,008 x VC-12) Synchronization interfaces 2.048 Mbps: ITU-T G.703 or 2.048 MHz: ITU-T G.703 Fujitsu Network Communications, Inc. 2801 Telecom Parkway, Richardson, TX 75082 800.777.FAST FAX 972.479.6900 www.fnc.fujitsu.com FLX600A/DS/1.0/8.99/CM |
Price & Availability of FLX600A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |