 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TLP560J TOSHIBA Photocoupler GaAs Ired & Photo-Triac TLP560J Triac Driver Programmable Controllers AC-Output Module Solid State Relay Unit in mm The TOSHIBA TLP560J consists of a photo-triac optically coupled to a gallium arsenide infrared emitting diode in a six lead plastic DIP package. * * * * * * Peak off-state voltage: 600V(min.) On-state current: 100mA(max.) Isolation voltage: 2500Vrms (min.) UL recognized: UL1577, file no. E67349 Isolation operating voltage: 2500Vac or 300Vdc for isolation Groupe C*1 Trigger LED current TOSHIBA Marking Of Classification T7 T7, blank Classification* (IFT7) Standard Trigger LED Current (mA) VT=6V, Ta=25C Min. Max. 7 10 11-7A9 Weight: 0.39 g *Ex. (IFT7); TLP560J(IFT7) (Note) Application type name for certification test, please use standard product type name, i.e. TLP560J(IFT7): TLP560J *1: According to VDE0110, table 4. Pin Configuration (top view) 1 2 3 4 1: Anode 2: Cathode 3: N.C. 4: Terminal 1 6: Terminal 2 6 1 2002-09-25 TLP560J Maximum Ratings (Ta = 25C) Characteristic Forward current Forward current derating (Ta 53C) LED Peak forward current (100s pulse, 100pps) Reverse voltage Junction temperature Off-state output terminal voltage On-state RMS current Detector Ta=25C Ta=70C Symbol IF IF / C IFP VR Tj VDRM IT(RMS) IT / C ITP ITSM Tj Tstg Topr Tsol BVS Rating 50 -0.7 1 5 125 600 100 50 -1.1 2 1.2 115 -55~125 -40~100 260 2500 Unit mA mA / C A V C V mA mA / C A A C C C C Vrms On-state current derating(Ta 25C) Peak on-state current (100s pulse, 120pps) Peak nonrepetitive surge current (Pw=10ms,DC=10%) Junction temperature Storage temperature range Operating temperature range Lead soldering temperature (10s) Isolation voltage (AC, 1min., R.H. 60%) Recommended Operating Conditions Characteristic Supply voltage Forward current Peak on-state current Operating temperature Symbol VAC IF ITP Topr Min. 15 -25 Typ. 20 Max. 240 25 85 Unit Vac mA A C 2 2002-09-25 TLP560J Individual Electrical Characteristics (Ta = 25C) Characteristic Forward voltage LED Reverse current Capacitance Peak off-state current Peak on-state voltage Detector Holding current Critical rate of rise of off-state voltage Critical rate of rise of commutating voltage Symbol VF IR CT IDRM VTM IH dv / dt dv / dt(c) IF=10mA VR=5V V=0, f=1MHz VDRM=600V ITM=100mA Vin=240Vrms, Ta=85C Vin=60 Vrms, IT=15mA (fig.1) (fig.1) Test Condition Min. 1.0 Typ. 1.15 10 10 1.7 1.0 500 0.2 Max. 1.3 10 1000 3.0 Unit V A pF nA V mA V / s V / s Coupled Electrical Characteristics (Ta = 25C) Characteristic Trigger LED current Capacitance (input to output) Isolation resistance Symbol IFT CS RS Test Condition VT=6V, RL=100 VS=0, f=1MHz VS=500V AC, 1 minute Isolation voltage BVS AC, 1 second, in oil DC, 1 minute, in oil Min. 5x1010 2500 Typ. 5 0.8 1014 5000 5000 Max. 10 Unit mA pF Vrms Vdc Fig.1: dv / dt test circuit Rin VCC + - 120 1 2 3 4 6 RL 4k Vin 5V, VCC 0V dv / dt (c) dv / dt 3 2002-09-25 TLP560J IF - Ta 100 IT(RMS) - Ta 200 Allowable forward current IF (mA) 80 160 R. M. S. on-state current IT (RMS) (mA) 60 120 40 80 20 40 0 -20 0 20 40 60 80 100 120 0 -20 0 20 40 60 80 100 120 Ambient temperature Ta () Ambient temperature Ta () 3000 IFP - DR Pulse width 100s Ta = 25 100 Ta = 25 50 IF - VF (mA) Forward current IF 1000 30 Allowable pulse forward current IFP (mA) 500 300 10 5 3 100 50 30 1 0.5 10 3 10-3 3 10-2 3 10-1 3 100 0.3 0.1 0.6 Duty cycle ratio DR 0.8 1.0 1.2 1.4 1.6 1.8 Forward voltage VF (V) VF / Ta -3.2 -2.8 -2.4 -2.0 -1.6 -1.2 -0.8 -0.4 0.1 - IF 1000 500 IFP - VFP Forward voltage temperature coefficent VF / Ta (mV / ) (mA) IFP Pulse forward current 300 100 50 30 10 5 3 Pulse width100s Repetitive frequency=100Hz Ta = 25 0.3 0.5 1 3 5 10 30 50 1 0.6 1.0 1.4 1.8 2.2 2.6 Forward current IF (mA) Pulse forward voltage VFP (V) 4 2002-09-25 TLP560J Normalized 3 2 IFT - Ta VT = 6V 3 2 Normalized IH - Ta IFT Trigger LED current (arbitrary unit) 0.5 Holding current (arbitrary unit) 1.2 1 1.2 1 IH 40 60 100 0.5 0.3 0.3 0.1 -40 -20 0 20 80 0.1 -40 -20 0 20 40 60 80 100 Ambient temperature Ta () Ambient temperature Ta () 10 3 Normalized VDRM = Rated IDRM - Ta 1.4 Normalized VDRM - Ta 10 2 Off-state output terminal voltage VDRM (arbitrary unit) 0 20 40 60 80 100 Peak off-state current IDRM (arbitrary unit) 1.2 1.0 0.8 10 1 0.6 10 0 0.4 0.2 -40 -20 0 20 40 60 80 100 Ambient temperature Ta () Ambient temperature Ta () 10 Normalized Current - LED Current Pulse Width Normalized LED current IF / IFT 5 3 2 1.8 1.6 1.4 1.2 1 10 30 50 100 300 500 1000 LED current pulse width Pw (s) 5 2002-09-25 TLP560J RESTRICTIONS ON PRODUCT USE * 000707EBC TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. The products described in this document are subject to the foreign exchange and foreign trade laws. The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. The information contained herein is subject to change without notice. * * * * * 6 2002-09-25 |
Price & Availability of TLP560J
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |