| PART |
Description |
Maker |
| SWITCHLINK-S1 |
The battery powered light switch
|
rfsolutions.ltd
|
| AMS6206 |
Battery powered equipment
|
Advanced Monolithic Sys...
|
| CMOS555 |
LOWEST SUPPLY CURRENT FOR BATTERY-POWERED APPLICATIONS
|
Silicon Laboratories
|
| SN90RC-4 |
4 Analog Channel, Battery Powered Wireless Sensor Node
|
Murata Manufacturing Co...
|
| IMP525EMA |
SINGLE CELL BATTERY POWERED ELECTROLUMINESCENT LAMP DRIVER/INVERTER
|
IMP
|
| HYB25L256160AF-7.5 HYE25L256160AF-7.5 |
Very low Power SDRAM optimized for battery-powered, handheld applications
|
Infineon
|
| TC115501EMTTR TC115 TC115301ECT TC115301EMTTR TC11 |
The TC115 is a high-efficiency step-up DC/DC converter for small, low input voltage or battery powered sys-tems. This device has ...
The TC115 is a high-efficiency step-up DC/DC converter for small, low input voltage or battery powered sys-tems. This device has a guaranteed start-up voltage of 0.9V and a typical supply current of 80 µA. Phase compensation and soft-
PFM/PWM Step-Up DC/DC Converter
|
MICROCHIP[Microchip Technology]
|
| PI3USB10LP-A PI3USB10LP-AZLE PI3USB10LP-AZME |
USB 2.0 High-Speed (480 Mbps) Signal Switch Targeted for Battery Powered Applications
|
Pericom Semiconductor Corporation
|
| PJ3100 |
7V; 300mA CMOS LDO with enable. For battery-powered devices, personal communication devices
|
PROMAX-JOHNTON
|
| PI3USB10LP-AZLE |
USB 2.0 High-Speed (480 Mbps) Signal Switch Targeted for Battery Powered Applications 的USB 2.0高速的电池供电应用80 Mbps）的信号开关目
|
Pericom Semiconductor, Corp.
|
| PI3USB102ZME PI3USB102ZMEX PI3USB102ZLE PI3USB102- |
USB SERIES, 2 LINE TO 4 LINE MULTIPLEXER AND DEMUX/DECODER, TRUE OUTPUT, QCC10 1.40 X 1.80 MM, 0.50 MM HEIGHT, GREEN, MO-220, TQFN-10
USB 2.0 High-Speed (480 Mbps) Signal Switch Targeted for Battery Powered Applications
|
Pericom Semiconductor, Corp.
Pericom Semiconductor C...
|
| 0638160500 0638160700 |
AIR POWERED TOOL Operating and Maintenance Instructions
AIR POWERED TOOL AIR POWERED TOOL
|
Molex Electronics Ltd.
|
