| PART |
Description |
Maker |
| MAX1036 MAX1036EKA- MAX1036-MAX1039 MAX1037 MAX103 |
2.7-5.5V; low power, 4-/12-channel 2-wire serial 8-bit ADC. For hand-held portable applications, medical instrumnets, battery-powered test equipment, solar-powered remote systems, received-signal-strength indicators, system supervision
" 2.7V to 5.5V, Low-Power, 4-/12-Channel 2-Wire Serial 8-Bit ADCs"
-2.7V to 5.5V, Low-Power, 4-/12-Channel 2-Wire Serial 8-Bit ADCs
2.7V to 5.5V / Low-Power / 4-/12-Channel 2-Wire Serial 8-Bit ADCs
|
MAXIM[Maxim Integrated Products]
MAXIM - Dallas Semiconductor
|
| 485BAT3-3903 RS-232 RS-422 RS-485 |
Battery Powered Converter CE
|
List of Unclassifed Manufacturers
ETC
|
| LS6525 |
BATTERY POWERED LOW-POWER PIR SENSOR INTERFACE
|
LSI
|
| HYB18L256160BC-7.5 HYE18L256160BC-7.5 HYB18L256160 |
Very low Power SDRAM optimized for battery-powered, handheld applications
|
Infineon
|
| PHK04P02T10 PHK04P02T |
P-channel vertical D-MOS logic level FET Battery powered applications
|
NXP Semiconductors
|
| PI3USB102 PI3USB102ZLE |
USB 2.0 High-Speed (480 Mbps) Signal Switch Targeted for Battery Powered Applications
|
Pericom Semiconductor Corporation
|
| MAX3471EUAT |
1.6µA, RS-485/RS-422, Half Duplex, Differential Transceiver for Battery-Powered Systems
|
MAXIM INTEGRATED PRODUCTS INC
|
| AAT2556 |
Battery Charger and Step-Down Converter for Portable Applications
|
Skyworks Solutions
|
| AAT2556IWP-CA-T1 |
Battery Charger and Step-Down Converter for Portable Applications
|
Advanced Analogic Technologies, Inc.
|
| HD74ALVC2G04 |
From old datasheet system
Low voltage and high speed operation is suitable for the battery powered products
Triple Inverter Buffers
|
Hitachi,Ltd.
HITACHI[Hitachi Semiconductor]
|
| ELM9709CAA ELM9709CBA ELM9709NAA ELM9709NBA ELM970 |
CMOS voltage detector IC for battery-operated portable devices CMOS电压检测芯片的电池的便携式设备
|
ELM Electronics
ETC[ETC]
Electronic Theatre Controls, Inc.
|
