| PART |
Description |
Maker |
| MCP809 MCP809T-270I_TT MCP809T-300I_TT MCP809T-315 |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
MICROCONTROLLER SUPERVISORY CIRCUIT WITH PUSH-PULL OUTPUT
|
Microchip Technology Inc.
|
| 24LC22A 24LC22A-I/P 24LC22A-I/SN 24LC22AT-I/SN |
The CAT24FC02 is a 2-kb Serial CMOS EEPROM internally organized as 256 words of 8 bits each 该CAT24FC02是一 KB的EEPROM的国56位每字举办的串行CMOS
2K VESA E - EDID SERIAL EEPROM
The Microchip Technology Inc. 24LC22A is a 256 x 8-bit dual-mode Electrically Erasable PROM. This device is designed for use in applications requiring storage and serial transmission of configuration and control information. Two modes of o
The Microchip Technology Inc. 24LC22A is a 256 x 8-bit dual-mode Electrically Erasable PROM. This device is designed for use in applications ...
|
Microchip Technology, Inc.
Microchip Technology Inc.
MICROCHIP[Microchip Technology]
|
| KLM-064MA-16A |
LED Dot Matrix(module designed for light emitting display device)
|
KODENSHI CORP.
KODENSHI KOREA CORP.
Kondenshi Corp
|
| KLM-096LA-16A |
LED Dot Matrix(module designed for light emitting display device)
|
KODENSHI CORP.
KODENSHI KOREA CORP.
Kondenshi Corp
|
| J113 J111-D74Z MMBFJ111 MMBFJ113 MMBFJ112 |
This device is designed for low level analog switching, sample and hold circuits and chopper stabilized amplifiers
|
Fairchild Semiconductor
|
| AT76C711 |
The Atmel AT76C711, based on Atmels proprietary 8-bit AVR-enhanced RISC architecture, is a USB device designed to provide a high-speed USB interface to devices that need to communicate with a host through fast serial links like UARTs and
|
Atmel
|
| IR1150 IR1150PBF IR1150ISTRPBF |
One Cycle Control PFC IC designed to operate in continuous conduction mode (CCM), designed and qualified for the Consumer market
One Cycle Control PFC IC designed to operate in continuous conduction mode (CCM), designed and qualified for the Industrial market.
|
International Rectifier
|
| T10C110B T10C110E T10C140B T10C140E T10C270B T10C1 |
SIDACtor㈢ Device
SIDACtor庐 Device
SIDACtor? Device
|
Littelfuse
|
| TC1037 TC1037CECT TC1039 TC1038 TC1039CECH TC1038C |
The TC1037/1038/1039 are single, low-power comparators designed for low-power applications. These comparators are specifically designed for operation from a single supply. However, operation from dual supplies also is possible, and power s
Linear Building Block . Single Comparator in SOT Packages
|
MICROCHIP[Microchip Technology]
Microchip Technology Inc.
|
| H66T19AA H66T19BA H66T32BA H66T68AA H66T68 H66T68B |
64-Note ROM memory Dynamic speaker can be driven with external NPN transistor
CMOS LSI DESIGNED FOR USE IN DOOR BELL/ TELEPHONE AND TOY
CMOS LSI DESIGNED FOR USE IN DOOR BELL, TELEPHONE AND TOY
|
MICRO-ELECTRONICS[Micro Electronics]
HSMC
Hi-Sincerity Mocroelectronics
Hi-Sincerity Microelectronics
|
