PART |
Description |
Maker |
MICROFOX-R-DB |
Ergonomically designed two-component handles for fatigue-proof and non-slip use
|
PHOENIX CONTACT
|
CRIMPFOX-16R-TWIN |
Ergonomically designed handles ensure an optimum grip and reduce the amount of force required by 25%
|
PHOENIX CONTACT
|
CRIMPFOX-50R |
Ergonomically designed handles ensure an optimum grip and reduce the amount of force required by 25%
|
PHOENIX CONTACT
|
P0502NL P0527NL P0429NL P0422NL P0420NL P0421NL P0 |
Designed for DC/DC converters, Wide variety of inductor sizes and current ratings available Solutions based on impedance, size and current, Designed for DC/DC converters, Dielectric strength: 1000VRMS
|
Pulse A Technitrol Company
|
TC1029EUA TC1029 TC1029EOA TC1029EPA |
The TC1029 is a dual, CMOS operational amplifier designed for low-power applications. It is designed specifically for operation from ... The TC1029 is a dual, CMOS operational amplifier designed for low-power applications. It is designed specifically for operation from a single supply, however, operation from dual supplies is also possible, and the power supply current drai Linear Building Block - Dual Low Power Op Amp
|
MICROCHIP[Microchip Technology]
|
216400P 216.630P 216.400P 216.800P 216.160P 216.31 |
5 x 20 mm Fast-Acting Fuse Designed to International Standards for use globally Designed to International Standards for use globally
|
Littelfuse
|
MCP100T-270I_TT MCP100T-300I_TT MCP100T-315I_TT MC |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3 The MCP100 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ... The MCP101 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ... The MCP101 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d The MCP100 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d CPU / System Supervisors Microcontroller Supervisory Circuit with Push-Pull Output
|
MICROCHIP[Microchip Technology] Microchip Technology Inc. Microchip Technology, Inc.
|
P1602ABLXX P0602ABLXX P3002AALXX P3002ABLXX P3002A |
The SIDACtor庐 Series Modified TO-220 are designed to protect baseband The SIDACtor? Series Modified TO-220 are designed to protect baseband
|
Littelfuse
|
CY38030V208-125NC CY38030V208-125NI CY38030V256-12 |
Programmable Logic : Programmable Logic Devices CPLD designed for migration. Speed 83 MHz. CPLD designed for migration. Speed 125 MHz.
|
Cypress
|
PBP-3201 PBP-3201-22 PBP-3202-22 PBP-3203-22 PBP-3 |
Equipment Designed to Conform EMI Regulations Such As VCCICISPRFCCVDEetc EQUIPMENT DESIGNED TO CONFORM EMI REGULATIONS SUCH AS VCCI,CISPR,FCC,VDE,ETC Equipment Designed to Conform EMI Regulations Such As VCCI/CISPR/FCC/VDE/etc KPT 10C 10#20 PIN PLUG KPTC 10C 10#20 SKT PLUG KPTC 6C 6#20 SKT PLUG KPTC 8C 8#20 PIN PLUG
|
http:// LAMBDA[DENSEI-LAMBDA]
|
PBF-1206-22 PBF-1201 PBF-1201-22 PBF-1202-22 PBF-1 |
Equipment Designed to Conform EMI Regulations Such As VCCI/CISPR/FCC/VDE/etc Equipment Designed to Conform EMI Regulations Such As VCCI,CISPR,FCC,VDE,etc KPTC 8C 8#20 SKT PLUG
|
http:// LAMBDA[DENSEI-LAMBDA]
|
STC2G15 STC2G15R |
BCMOS VOLTAGE REGULATOR DESIGNED FOR USE WITH VERY LOW ESR AND TANTALIUM OUTPUT CAPACITOR BCMOS VOLTAGE REGULATOR DESIGNED FOR USE WITH VERY LOW ESR AND TANTALUM OUTPUT CAPACITOR
|
ST Microelectronics STMICROELECTRONICS[STMicroelectronics] 意法半导
|