| PART |
Description |
Maker |
| JRGC0678 |
miniature chip type designed for surface mounting
|
IDEA.lnc.
|
| ISOC0128 |
miniature chip type designed for two-way surface mounting
|
IDEA.lnc.
|
| JYC0195 |
miniature chip type designed for surface mounting
|
IDEA.lnc.
|
| JYC0175 |
miniature lens type designed for surface mounting
|
IDEA.lnc.
|
| JEGC0158 |
miniature chip type designed for surface mounting
|
IDEA.lnc.
|
| JEGC0678 |
miniature chip type designed for surface mounting
|
IDEA.lnc.
|
| AM29824DM AM29826DM AM29822DM AM29822LMB AM29822DM |
9-Bit D-Type Flip-Flop
Reference Design kit for the iP1206 a 300kHz, 30A Synchronous Buck Converter; A IRDCIP1206-B with Standard Packaging
Intelligent Power Module. Gate Driver IC integrated with a half bridge FredFET Designed for sub 250W Motor Drive applications in a 9-Lead SIP. RDSon of 1.0 Ohm; A IR3101 with Standard Packaging 10位D型触发器
IR1150 Demo Board designed for use in continuous conduction mode boost converter applications for power factor correction and harmonic current reduction.; A IRAC1150-300W with Standard Packaging 10位D型触发器
Octal D-Type Flip-Flop 八路D类触发器
|
Toshiba, Corp.
Electronic Theatre Controls, Inc.
ITT, Corp.
ATM Electronic, Corp.
|
| JYGC0118 |
miniature chip type designed for surface mounting and measure approximately 2.5 x 3 mm
|
IDEA.lnc.
|
| C16005 |
Asymmetric IESNA Type I (short) beam designed for tilted poles
|
Ledil, Inc.
|
| C16051 |
Asymmetric IESNA Type I (short) beam designed for tilted poles
|
Ledil, Inc.
|
| 2SC1971 |
silicon NPN epitaxial planar type transistor designed for RF power amplifiers on VHF band mobile radio
|
New Jersey Semi-Conductor Products, Inc.
|
