| PART |
Description |
Maker |
| ATA6626C ATA6624C ATA6622 ATA6622C ATA662210 |
Typically 10 渭A Supply Current During Sleep Mode
Typically 10 μA Supply Current During Sleep Mode
|
ATMEL Corporation
|
| MCP606-I/P MCP606-I/SN MCP606-I/ST MCP609-I/P MCP6 |
The MCP606 operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 and ...
The MCP609 quad operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 ...
The MCP608 operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 and ...
The MCP607 dual operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 ...
2.5V TO 5.5V MICROPOWER CMOS OP AMPS
|
Microchip Technology Inc.
|
| MCP6002 MCP6002EP MCP6002ESN MCP6004 MCP6004E MCP6 |
The MCP6002 is a dual general purpose op amp offering rail to rail input & output over the 1.8 to 5.5V operating range. This amplifier has a typical GBWP of 1 MHz with typical quiescent current of 100 microamperes. The MCP6002 is avail
Operational Amplifier - Datasheet Reference
1 MHz Bandwidth Low Power Op Amp
The MCP6001 is a single general purpose op amp offering rail to rail input & output over the 1.8 to 5.5V operating range. This amplifier has a typical GBWP of 1 MHz with typical quiescent current of 100 microamperes. The MCP6001 is ava
|
Microchip Technology Inc
MICROCHIP[Microchip Technology]
|
| SPPS-27-48F-N2-CDFA |
Sleep Mode for Power Consumption
|
Source Photonics, Inc.
|
| MCP603T-E/ST MCP603T-I/ST MCP6022-I/SN MCP6022-I/S |
MCP603 operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 and an offset ...
The MCP602 dual operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 ...
MCP601 operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230 and an offset ...
The MCP604 quad operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230. ...
|
Microchip
|
| MCP6021 MCP6024 MCP6022 MCP6024T-I_ST MCP6021-E_P |
The MCP6022 dual operational amplifier (op amp) has a gain bandwidth product of 10 MHz with a low typical operating current of 1.0 ...
The MCP6021 operational amplifier (op amp) has a gain bandwidth product of 10 MHz with a low typical operating current of 1.0 mA ...
The MCP6024 quad operational amplifier (op amp) has a gain bandwidth product of 10 MHz with a low typical operating current of 1.0 ...
The MCP6023 operational amplifier (op amp) has a gain bandwidth product of 10 MHz with a low typical operating current of 1.0 mA ...
Rail-to-Rail Input/Output 10 MHz Op Amps
Rail-to-Rail Input/Output, 10 MHz Op Amps
|
MICROCHIP[Microchip Technology]
|
| V61558P V61558S V6155 |
Extremely Accurate Power Surveillance, Software Monitoring and Sleep Mode Detection
|
EMMICRO[EM Microelectronic - MARIN SA]
|
| TC59 TC593002ECB TC595002ECB TC595002ECBTR |
The TC59 is a low dropout, negative output voltage regulator designed specifically for battery-operated systems. Its full CMOS construction eliminates the wasted ground current typical of bipolar LDOs. This reduced supply current significa
|
MICROCHIP[Microchip Technology]
|
| 9DBV0441 |
53mW typical power consumption in PLL mode
|
Integrated Circuit Syst...
|
| V23990-P825-F-P2-19 |
Typical average static loss as a function of output current
|
Vincotech
|
| GDSSF2301B-15 |
TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS
High Power and current handing capability
|
GOOD-ARK Electronics
|
