| PART |
Description |
Maker |
| 1050291001 SD-105029-101 |
2.00mm (.079") Pitch Battery Connector, Right Angle, 4 Circuits, SMT, Contact Width 0.65mm
2.00mm (.079) Pitch Battery Connector, Right Angle, 4 Circuits, SMT, Contact Width 0.65mm
|
Molex Electronics Ltd.
|
| 1050400001 SD-105040-001 |
2.00mm (.079) Pitch Battery Connector, 3 Circuits, Surface Mount, Contact Width 0.70mm (.028)
2.00mm (.079") Pitch Battery Connector, 3 Circuits, Surface Mount, Contact Width 0.70mm (.028")
MOLEX Connector
|
Molex Electronics Ltd.
|
| 0473590001 473590001 |
2.00mm (.079") Pitch Battery Connector, SMT, Contact Width 7.00mm (.276"), Working Height 2.10mm (.083"), 4 Circuits, Lead-free
|
Molex Electronics Ltd.
|
| NE57605 NE57605_1 NE57605CD |
From old datasheet system
Lithium-ion Battery Protector for 3 or 4 cell battery packs
|
NXP Semiconductors
PHILIPS[Philips Semiconductors]
|
| NCP802 NCP802SN1T1 NCP802SAN1T1 NCP802SAN1T1G NCP8 |
Highly Integrated Lithium Battery Protection Circuit for One Cell Battery Packs
|
ONSEMI[ON Semiconductor]
|
| LTC4071 LTC4071EDDB LTC4071IDDB LTC4071EMS8E LTC40 |
Li-Ion/Polymer Shunt Battery Charger System with Low Battery Disconnect
|
Linear Integrated Systems
Linear Technology
|
| MIC7905005 MIC79050-4.2YS |
1 A BATTERY CHARGE CONTROLLER, PSSO3
Simple Lithium-Ion Battery Charger
|
MICREL INC
Micrel Semiconductor
|
| MP26121 MP26121DQ |
28V, 1A Li Linear Battery Charger with 10% Battery-Full Threshold and Flexible NTC Interface
|
Monolithic Power Systems
|
| 796136-1 |
Battery Interconnection System for Portable Electronics; ASSY, SMT BATTERY CONN ( AMP )
|
Tyco Electronics
|
| LA5619M |
Lead Battery Charger IC with Battery Voltage Detection Function
|
SANYO[Sanyo Semicon Device]
|
| MCP73213T-B6AI/MF MCP73213T-A6SI/MF MCP73213-G6XI/ |
Battery Management and Fuel Gauges - Battery Chargers
|
Microchip
|
| MCP73223T-C2HI/MF |
Battery Management and Fuel Gauges - Battery Chargers
|
Microchip
|
