| PART |
Description |
Maker |
| B41858 |
Aluminum electrolytic capacitors Single-ended capacitors
|
TDK Electronics
|
| B41858D3398M001 B41858 B41858C3108M001 B41858C3109 |
Single-ended capacitors
|
EPCOS[EPCOS]
|
| B41821K4228M003 B41821 B41821A2108M000 B41821A2108 |
Single-ended capacitors
|
EPCOS[EPCOS]
|
| B41856A9477M00 B41856 B41856A2158M00 B41856A3108M0 |
Single-Ended Capacitors Low Impedance
|
EPCOS[EPCOS]
|
| B41852A7475M00 B41852 B41852A3156M00 B41852A4106M0 |
Single-Ended GP Capacitors Low Profile
|
EPCOS[EPCOS]
|
| A750KK108M0ECAE012 A750MS108M1ACAE013 A750KK827M0J |
Single-Ended Conductive Polymer Aluminum Solid Electrolytic Capacitors
|
Kemet Corporation
|
| MAX4598CAPT |
Low-Voltage, Combination Single-Ended 8-to-1 Differential 4-to-1 Multiplexer 8-CHANNEL, SGL ENDED MULTIPLEXER, PDSO20
|
Maxim Integrated Products, Inc.
|
| B43857K2476M00 B41857 B41857A3107M00 B41857A3108M0 |
Single-Ended Capacitors High Reliability
|
EPCOS[EPCOS]
http://
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| LTC1393 LTC1393C LTC1393CGN LTC1393CS LTC1393I LTC |
Octal Buffers/Drivers With Open-Collector Outputs 20-SOIC 0 to 70
Single-Ended 8-Channel/ Differential 4-Channel Analog Multiplexer with SMBus Interface
Single-Ended 8-Channel/Differential 4-Channel Analog Multiplexer with SMBus Interface
From old datasheet system
|
Linear Technology Corporation
LINER[Linear Technology]
ce
|
| MAX9380 MAX9380EUA MAX9380ESA |
Single-Ended-to-Differential LVECL/LVPECL 2:1 Multiplexer 93 SERIES, 2 LINE TO 1 LINE MULTIPLEXER, COMPLEMENTARY OUTPUT, PDSO8
Single-Ended-to-Differential LVECL/ LVPECL 2:1 Multiplexer
|
Maxim Integrated Products, Inc.
MAXIM[Maxim Integrated Products]
MAXIM - Dallas Semiconductor
|
| TGA2951-EPU |
10 Gb/s Single Ended to Differential Amplifier TGA2951-EPU
10 Gb/s Single Ended to Differential Amplifier TGA2951-EPU
|
TRIQUINT[TriQuint Semiconductor]
|
