PART |
Description |
Maker |
SH3004-DC90A SH3004-DC90A09 |
Near edge type thermal printhead(11.81dots / mm)
|
Rohm
|
SH3002-DC90A SH3002-DC90A09 |
Near edge type thermal printhead(11.81dots / mm)
|
Rohm
|
NE3002-WA30A |
Near edge thermal printhead (with thermal historical control)
|
ROHM[Rohm]
|
SH3004-DC70A |
Near edge thermal printhead (with thermal historical control)
|
ROHM[Rohm]
|
SH2002-DC90A07 |
Near edge thermal printhead (8dots / mm)
|
Rohm
|
EYGS0509ZLMH EYGS0512ZLGE EYGS0911ZLDA EYGS0606ZLS |
Thermal protection sheet (PGS/PGS applied products/NASBIS) - GraphiteTIM(Compressible Type) PGS with low thermal resistance
|
Panasonic
|
KF2004-GM50 KF2004-GM50A |
Thermal Printheads > For BARCODE, SCALE > KF2002*-, 300*-GM Series Thick film thermal printhead (with thermal historical control) 厚膜热敏打印头(热历史与控制
|
ROHM[Rohm] Rohm CO.,LTD. Rohm Co., Ltd.
|
HCTS374T HCTS374KTR HCTS374DTR |
Dual Positive-Edge-Triggered D-type Flip-Flops With Clear And Preset 20-LCCC -55 to 125 1024 x 18 Synchronous FIFO Memory 68-CPGA -55 to 125 Radiation Hardened Octal D-Type Flip-Flop, Three-State, Positive Edge Triggered
|
Intersil Corporation
|
4400.0179 4400.0178 4400.0120 4400.0114 T11-811 |
Circuit Breaker for Equipment thermal, Drop-in type, Reset type, Quick connect terminals
|
Schurter Inc.
|
27C080 AT27C080 AT27C080-10DC AT27C080-10DI AT27C0 |
8-Megabit 1M x 8 UV Erasable CMOS EPROM 1M X 8 OTPROM, 90 ns, PQCC32 Octal Edge-Triggered D-Type Flip-Flops With 3-State Outputs 20-TSSOP -40 to 85 1M X 8 OTPROM, 90 ns, PQCC32 Octal Edge-Triggered D-Type Flip-Flops With 3-State Outputs 20-SSOP -40 to 85 1M X 8 OTPROM, 120 ns, PDSO32 Octal Edge-Triggered D-Type Flip-Flops With 3-State Outputs 20-SOIC -40 to 85
|
ATM Electronic, Corp. Atmel, Corp. Atmel Corp. ATMEL[ATMEL Corporation]
|
IDT74LVC374ASO IDT74LVC374A IDT74LVC374APG IDT74LV |
3.3V CMOS OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS, 5V TOLERANT I/O 3.3V CMOS Octal Edge-Triggered D-Type Flip-Flop with 3-State Outputs, 5.0V Tolerant I/O 3.3V CMOS OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS AND 5 VOLT TOLERANT I/O From old datasheet system 3.3V CMOS OCTAL EDGE-TRIGGERED D-TYPE FLIPFLOP
|
IDT[Integrated Device Technology]
|