| PART |
Description |
Maker |
| HCPL-J314 HCPL-J314-300 HCPL-J314-500 HCPL-J314-XX |
0.4 Amp Output Current IGBT Gate Drive Optocoupler 0.4安培输出电流IGBT栅极驱动光电耦合
DB25 F/F NULL MODEM ADAPT SCA-
HCPL-J314 · 0.4 Amp Output Current IGBT Gate Drive Optocoupler
|
Ecliptek, Corp.
HP[Agilent(Hewlett-Packard)]
Agilent (Hewlett-Packard)
|
| HCPLT250 |
1.5 Amp Output Current IGBT Gate Drive Optocoupler
|
Agilent Technologies
|
| HCPL-J314 HCPL-314J |
0.6 Amp Output Current IGBT Gate Drive Optocoupler
|
AVAGO TECHNOLOGIES LIMITED
|
| HCPL-T250 HCPL-T250-060 HCPL-T250-300 HCPL-T250-50 |
1 CHANNEL LOGIC OUTPUT OPTOCOUPLER
HCPL-T250 · 1.5 Amp Output Current IGBT Gate Drive Optocoupler
|
AGILENT TECHNOLOGIES INC
Agilent(Hewlett-Packard)
Agilent (Hewlett-Packard)
|
| HCPL-T251 |
HCPL-T251 · 0.4 Amp Output Current IGBT Gate Drive Optocoupler
|
Agilent (Hewlett-Packard)
|
| PM30RHC060 |
TRANSISTOR | IGBT POWER MODULE | 3-PH BRIDGE | 600V V(BR)CES | 30A I(C)
Intellimod-3 Modules: Three Phase Brake, IGBT Inverter Output 30 Amp, 110-230 Volt Line
|
Powerex Power Semiconductors
|
| MCP6142 MCP6144 MCP6143 MCP6141 MCP6142-I/MS MCP61 |
600 nA, Non-Unity Gain Rail-to-Rail Input/Output Op Amps
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
|
Microchip Technology Inc.
MICROCHIP[Microchip Technology]
|
| TS612_02 TS612 TS612ID TS612IDT |
DUAL WIDEBAND OP-AMP WITH HIGH OUTPUT CURRENT
DUAL WIDE BAND OPERATIONAL AMPLIFIER WITH HIGH OUTPUT CURRENT
|
ST Microelectronics
STMICROELECTRONICS[STMicroelectronics]
|
| HCPL0730 HCPL0731 HCPL0700 HCPL0700R2 HCPL0700R2V |
Low Input Current High Gain Split Darlington Optocouplers
8-Pin SOIC Dual-Channel Low Current High Gain Split Darlington Output Optocoupler; Package: SOIC-W; No of Pins: 8; Container: Tape & Reel 2 CHANNEL LOGIC OUTPUT OPTOCOUPLER
|
Fairchild Semiconductor, Corp.
|
| PS9552L3-AX PS9552L2-E3-AX PS9552L3-E3-AX PS9552L2 |
1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER
2.5 A OUTPUT CURRENT, HIGH CMR IGBT GATE DRIVE PHOTOCOUPLER 8-PIN DIP PHOTOCOUPLER
|
NEC
|
