| PART |
Description |
Maker |
| STGIPS14K60 |
IGBT intelligent power module (IPM) 12 A, 600 V, DBC isolated, SDIP-25L molded
|
STMicroelectronics
|
| STGIPN3H60A |
SLLIMM(TM)-nano small low-loss intelligent molded module IPM, 3 A - 600 V 3-phase IGBT inverter bridge
|
ST Microelectronics
|
| STGIPS20C60 |
SLLIMM small low-loss intelligent molded moduleI PM, 3-phase inverter - 20 A, 600 V short-circuit rugged IGBT
|
STMicroelectronics
|
| 9250-684-RC 9250-332-RC 9250-182-RC 9250-122-RC 92 |
CHOKE RF MOLDED 680UH FERRITE 1 ELEMENT, 680 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
CHOKE RF MOLDED 3.3UH IRON 1 ELEMENT, 3.3 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
CHOKE RF MOLDED 1.8UH IRON 1 ELEMENT, 1.8 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
CHOKE RF MOLDED 1.2UH IRON 1 ELEMENT, 1.2 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
CHOKE RF MOLDED 3900UH FERRITE 1 ELEMENT, 3900 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
CHOKE RF MOLDED .68UH PHENOLIC 1 ELEMENT, 0.68 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
CHOKE RF MOLDED 18UH FERRITE 1 ELEMENT, 18 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
CHOKE RF MOLDED 82UH FERRITE 1 ELEMENT, 82 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
CHOKE RF MOLDED 15UH FERRITE 1 ELEMENT, 15 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
CHOKE RF MOLDED .47UH PHENOLIC 1 ELEMENT, 0.47 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR
RF Choke; Series:9250; Inductance:4.7uH; Inductance Tolerance: /- 10 %; Q Factor:44; Self Resonant Frequency:70MHz; Terminal Type:Axial Leaded; Core Material:Iron; Current Rating:380mA; DC Resistance Max:0.55ohm
|
Bourns, Inc.
BOURNS INC
|
| STGIPS10K60A |
SLLIMM(TM) small low-loss intelligent molded module IPM, 3-phase inverter - 10 A, 600 V short-circuit rugged IGBT
|
ST Microelectronics
|
| STGIPL14K60 STGIPL14K60-S |
SLLIMM(TM) small low-loss intelligent molded module IPM, 3-phase inverter - 15 A, 600 V short-circuit rugged IGBT
|
ST Microelectronics
|
| T323A474J035AS-C T323A474J035AT-C T323A474K035AS-C |
TANTALUM MOLDED
DISSIPATION FACTOR: Maximum DF limits are shown in corresponding series part number listings on pages 44-48. See Application Notes Section, page 76 for addi-tional
PERFORMANCE CHARACTERISTICS
TANTALUM MOLDED / AXIAL ?MIL-PRF-49137/1&5
TANTALUM MOLDED / AXIAL . MIL-PRF-49137/1&5
|
Kemet Corporation
|
| MDP16-46 MDP16-45 |
Dual Inline Package, Molded DIP, Rugged, Molded Case Construction, Highly Stable, Automatic Insert Compatible, Available in Tube Pack, Reduces Assembly Costs
|
Vishay
|
| 1201135063 SD-120113-021 120113-5063 |
Nano-Change Molded Junction Box, Top Mount with Molded Cable, 90° Angle, 4 Ports
Nano-Change Molded Junction Box, Top Mount with Molded Cable, 90掳 Angle, 4 Ports
MOLEX Connector
|
Molex Electronics Ltd.
|
| AIAM-02-R82K AIAM-02-6R8K AIAM-02-681J AIAM-02-R68 |
THROUGH-HOLE MOLDED INDUCTORS 1 ELEMENT, 0.82 uH, GENERAL PURPOSE INDUCTOR
THROUGH-HOLE MOLDED INDUCTORS 1 ELEMENT, 6.8 uH, GENERAL PURPOSE INDUCTOR
THROUGH-HOLE MOLDED INDUCTORS 1 ELEMENT, 680 uH, GENERAL PURPOSE INDUCTOR
THROUGH-HOLE MOLDED INDUCTORS 1 ELEMENT, 0.68 uH, GENERAL PURPOSE INDUCTOR
THROUGH-HOLE MOLDED INDUCTORS 1 ELEMENT, 0.22 uH, GENERAL PURPOSE INDUCTOR
THROUGH-HOLE MOLDED INDUCTORS 1 ELEMENT, 160 uH, GENERAL PURPOSE INDUCTOR
THROUGH-HOLE MOLDED INDUCTORS 1 ELEMENT, 1.5 uH, GENERAL PURPOSE INDUCTOR
THROUGH-HOLE MOLDED INDUCTORS 1 ELEMENT, 3.3 uH, GENERAL PURPOSE INDUCTOR
THROUGH-HOLE MOLDED INDUCTORS 1 ELEMENT, 22 uH, GENERAL PURPOSE INDUCTOR
THROUGH-HOLE MOLDED INDUCTORS 1 ELEMENT, 110 uH, GENERAL PURPOSE INDUCTOR
THROUGH-HOLE MOLDED INDUCTORS 1 ELEMENT, 240 uH, GENERAL PURPOSE INDUCTOR
THROUGH-HOLE MOLDED INDUCTORS 1 ELEMENT, 130 uH, GENERAL PURPOSE INDUCTOR
|
Abracon, Corp.
|
| FID50-12BD FIO50-12BD |
IGBT Discretes
MOSFET / IGBT AC Switches: IGBT AC Switches
Bidirectional Switch with IGBT and fast Diode Bridge
|
IXYS[IXYS Corporation]
|
|
