| PART |
Description |
Maker |
| ERZV10D621 ERZV10DXXX |
Straight Leads Cut Type
|
Panasonic
|
| G310 G310-ST310 |
Anti-visible rays due to visible ray cut resin for detector type
connector type
|
KODENSHI KOREA CORP.
|
| SG113 |
Visible light cut type
|
KODENSHI KOREA CORP.
|
| 87089-0616 |
Header; No. of Contacts:6; Pitch Spacing:2mm; No. of Rows:2; Series:Mill-Grid; Connector Body Material:Nylon; Mounting Type:PC Board; Terminal Type:Straight Pin 6 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER
|
Molex, Inc.
|
| 53014-0310 |
Header; No. of Contacts:3; Pitch Spacing:2mm; No. of Rows:1; Series:53014; Connector Body Material:Nylon; Mounting Type:PC Board; Terminal Type:Straight Pin RoHS Compliant: Yes 3 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER
|
Molex, Inc.
|
| AC08FSMA |
Insulation type TRIAC fully covered with resin on the entire case other than electrode leads
|
Kersemi Electronic Co.,...
|
| ADP1110 ADP1110AN ADP1110AN-12 ADP1110AN-33 ADP111 |
Micropower/ Step-Up/Step-Down Switching Regulator; Adjustable and Fixed 3.3 V/ 5 V/ 12 V
Top Entry Connector Hood; Enclosure Material:Aluminum Alloy; For Use With:C146 Rectangular Circular Connectors; Thread Size:PG 29; Connecting Termination:Screw; Gender:Male; No. of Contacts:48; Operating Voltage:400V; Series:C-146 RoHS Compliant: Yes
Circular Connector Cable Assembly; Connector Type A:Circular Receptacle; Connector Type B:Stripped End Leads; Cable Length:10ft RoHS Compliant: Yes
Circular Connector Cable Assembly; Connector Type A:Circular Plug; Connector Type B:Stripped End Leads; Cable Length:10ft RoHS Compliant: Yes
Micropower, Step-Up/Step-Down Switching Regulator; Adjustable and Fixed 3.3 V, 5 V, 12 V 1.5 A SWITCHING REGULATOR, 90 kHz SWITCHING FREQ-MAX, PDIP8
|
Analog Devices, Inc.
ANALOG DEVICES INC
|
| PM3700-80-RC PM3700-30-RC |
Power Inductor; Series:PM3700; Inductance:750uH; Terminal Type:PCB Surface Mount; Current Rating:5.5A; Frequency Max:20MHz; Frequency Min:1MHz; Leaded Process Compatible:Yes; Mounting Type:Surface Mount; Packaging:Cut Tape
|
Bourns Inc.
|
| SL0810001 |
Inside Kinked Leads Use -A after Ametherm’s part # Outside Kinked Leads Not Available
|
AMETHERM Circuit Protection Thermistors
|
| SL0810003 |
Inside Kinked Leads Use -A after Ametherm’s part # Outside Kinked Leads Not Available
|
AMETHERM Circuit Protection Thermistors
|
| SL0540001 |
Inside Kinked Leads Use -A after Ametherm’s part # Outside Kinked Leads Not Available
|
AMETHERM Circuit Protection Thermistors
|
