| PART |
Description |
Maker |
| SD-44764-001 44764-0402 0447640402 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI?/a> Receptacle Header
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header
3.00mm (.118") Pitch Micro-Fit 3.0, BMI垄芒 Receptacle Header
|
Molex Electronics Ltd.
|
| SD-44067-001 44067-1803 0440671803 |
3.00mm (.118) Pitch Micro-Fit 3.0 Wire-to-Board Header
3.00mm (.118) Pitch Micro-Fit 3.0?/a> Wire-to-Board Header
3.00mm (.118") Pitch Micro-Fit 3.0垄芒 Wire-to-Board Header
|
Molex Electronics Ltd.
|
| 43650-0818 |
3.00mm (.118) Pitch Micro-Fit 3.0 Header, Surface Mount Compatible, Single Row, Vertical, with Press-fit
|
Molex Electronics Ltd.
|
| SD-43650-008 |
3.00mm (.118) Pitch Micro-Fit 3.0 Header, Surface Mount Compatible, Single Row, Vertical, with Press-fit
|
Molex Electronics Ltd.
|
| 44769-2403 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Vertical, with Press-fit Plastic
|
Molex Electronics Ltd.
|
| 0447642001 44764-2001 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Right Angle, with Press-fit Plastic
|
Molex Electronics Ltd.
|
| 0436500918 43650-0918 |
3.00mm (.118) Pitch Micro-Fit 3.0 Header, Surface Mount Compatible, Single Row, Vertical, with Press-fit
MOLEX Connector
|
Molex Electronics Ltd.
|
| 44769-0402 |
3.00mm (.118) Pitch Micro-Fit 3.0, BMI Receptacle Header, Dual Row, Vertical, with Press-fit Plastic Pegs, 0.38um
|
Molex Electronics Ltd.
|
| 43045-1817 |
3.00mm (.118) Pitch Micro-Fit 3.0 Header, Surface Mount, Dual Row, Vertical, with Press-fit Metal Retention Clip, 18 Circuits
|
Molex Electronics Ltd.
|
| 0430450408 |
3.00mm (.118) Pitch Micro-Fit 3.0 Header, Surface Mount, Dual Row, Right Angle, with Press-fit Metal Retention Clip, 4 Circuits
|
Molex Electronics Ltd.
|
| 43045-0817 0430450817 |
3.00mm (.118) Pitch Micro-Fit 3.0 Header, Surface Mount, Dual Row, Vertical, with Press-fit Metal Retention Clip, 8 Circuits
|
Molex Electronics Ltd.
|
|
