PART |
Description |
Maker |
LTC3901EGN LTC3901 LTC3901-15 |
Secondary Side Synchronous Driver for Push-Pull and Full-Bridge Converters
|
Linear Technology
|
LTC3901 |
Secondary Side Synchronous Driver for Push-Pull and Full-Bridge Converters
|
Linear
|
SI9124DQ-T1 |
500-kHz Push-Pull DC-DC Converter With Integrated Secondary Synchronous Rectification Control 500千赫推挽式直流与集成的次级同步整流控制DC转换
|
Vishay Intertechnology, Inc. Vishay Intertechnology,Inc.
|
DS3687H DS3687J-8/A DS3687N-8/B DS3687H/A DS3687N- |
Dual Peripheral Driver µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin µP Supervisory, Push/Pull Active-Low, TH: 1.6V, Timeout: 100ms, SOT23 3-pin µP Supervisory, Push/Pull Active-Low, TH: 2.3V, Timeout: 20ms, SOT23 3-pin µP Supervisory, Push/Pull Active-Low, TH: 2.0V, Timeout: 100ms, SOT23 3-pin µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin 双外围驱动器
|
KEMET Corporation
|
MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ... The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ... Push-Pull Output Sub-Microamp Comparators The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package, The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package. The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ... The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ... From old datasheet system IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
PI74FCT238ATQ PI74FCT138CTQ PI74FCT238ATW |
Synchronous Push-Pull PWM Controllers; Package: SSOP; No of Pins: 16; Temperature Range: -40°C to 125°C 3线复用器 14-Bit, 80Msps Low Noise ADC; Package: SSOP; No of Pins: 48; Temperature Range: -40°C to 85°C 3线复用器
|
STMicroelectronics N.V.
|
S8740340PT |
GaAs Push Pull Hybrid
|
PDI
|
RFPP3180 |
GaAs Push Pull Hybrid
|
RF Micro Devices
|
AG606 AG606-G AG606-PCB |
Push-Pull CATV Amplifier
|
Electronic Theatre Controls, Inc. List of Unclassifed Manufacturers
|
S8740180GT |
GaAs Push Pull Hybrid
|
PDI
|
S8740200P |
GaAs Push Pull Hybrid
|
PDI
|
MAAM-011177-TR1000 MAAM-011177-TR2500 MAAM-011177- |
Push-Pull CATV Amplifier
|
M/A-COM Technology Solu...
|
|