| PART |
Description |
Maker |
| MAX9051AESA MAX9051AEUT-T MAX9041 MAX9041AESA MAX9 |
Micropower, Single-Supply, UCSP/SOT23 Comparator Precision Reference ICs COMPARATOR, 7000 uV OFFSET-MAX, 450 ns RESPONSE TIME, PDSO8
|
Maxim Integrated Products, Inc.
Maxim Integrated Produc...
|
| ADCMP600NBSP ADCMP600 ADCMP600BRJ-RL |
COMPARATOR, 5000 uV OFFSET-MAX, 3 ns RESPONSE TIME, PDSO5
From old datasheet system
ADCMP600 - Rail-to-Rail, Very Fast, 2.5 V to 5.5 V, Single-Supply TTL/CMOS Comparator in 5-lead SC70
Rail-to-Rail, Very Fast, 2.5 V to 5.5 V, Single-Supply TTL/CMOS Comparator in 5-lead SC70 and SOT-23
|
ANALOG DEVICES INC
|
| AD53032 AD53032JSTP |
Silver Mica Capacitor; Capacitance:12pF; Capacitance Tolerance: /- 5%; Series:CD17; Voltage Rating:500VDC; Capacitor Dielectric Material:Mica; Termination:Radial Leaded; Lead Pitch:5.9mm; Leaded Process Compatible:Yes RoHS Compliant: Yes
High Performance Driver/Comparator Active Load on a Single Chip
DRIVER/COMPARATOR/LOAD: A Single Chip that Performs the Pin Electronics Functions of Driver, Comparator and Active Load in ATE VLSI and Memory Testers
|
Analog Devices, Inc.
AD[Analog Devices]
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| TC1028 |
The TC1028 is a mixed-function device combining two comparators and a voltage reference in a single 8-pin package. The inverting input of comparator A and the non-inverting input of comparator B are internally connected to the reference. T
|
Microchip
|
| 74HC688 74HCT688 74HCT688PW 74HC688D 74HC688DB 74H |
HCT SERIES, 8-BIT IDENTITY COMPARATOR, INVERTED OUTPUT, PDSO20 PLASTIC, SOP-20
74HC/HCT688; 8-bit magnitude comparator
8-bit magnitude comparator(8位等值比较器) 8位数值比较器位等值比较器
|
NXP Semiconductors N.V.
PHILIPS[Philips Semiconductors]
|
| TC75S57F07 TC75S57FU TC75S57FE |
Single Comparator
|
Toshiba Semiconductor
|
| TC75S57F |
SINGLE COMPARATOR
|
Toshiba Semiconductor
|
| NJM2406F NJM2406 |
SINGLE COMPARATOR
|
New Japan Radio
|
| NJM2406 |
SINGLE COMPARATOR
|
njr
|
| M5239L M5239 |
SINGLE COMPARATOR
|
MITSUBISHI[Mitsubishi Electric Semiconductor]
|
|
