| PART |
Description |
Maker |
| 408-8737 |
The die assembly consists of an indenter die and nest die. Each die is held in the tool by a single screw
|
Tyco Electronics
|
| 411-18235 0-744003-5 |
This ERGOCRIMP Die is suitable to crimp the following crimp contacts
|
TE Connectivity Ltd
|
| 63811-1000 63812-0000 22-01-2041 22-01-2081 W-HT-1 |
KK-100 Connector Kit Vertical and Right Angle Header and Receptacle, with Extraction and Premium Crimp Tool
KK-156 Connector Kit Vertical and Right Angle Header and Receptacle, with Extraction and Universal Crimp Tool
|
MolexKits
|
| 0638238000 |
Hand Crimp Tool for 2.50mm Pitch Wire to Wire Crimp Terminals
|
Molex Electronics Ltd.
|
| 0640030700 |
Hand Crimp Tool
|
Molex Electronics Ltd.
|
| 19285-0074 |
Hand Crimp Tool
|
Molex Electronics Ltd.
|
| 4--21028--9 |
Pneumatic CERTI-CRIMP Tool
|
Tyco Electronics
|
| 0640160036 |
ServiceGrade Hand Crimp Tool
|
Molex Electronics Ltd.
|
| 73415-4500 |
Manual RF Coaxial Crimp Tool
|
Molex Electronics Ltd.
|
| 63811-7000 02-08-1201 02-08-1202 02-08-1203 02-08- |
HAND CRIMP TOOL SPECIFICATION SHEET
|
Molex Electronics Ltd.
|
| 0638234170 |
Tool Kit for CP 2.8 Receptacle Crimp Terminals
|
Molex Electronics Ltd.
|
