| PART |
Description |
Maker |
| MC74HC158 MC74HC158D MC74HC158N MC54_74HC158A ON13 |
Quad 2-Input Data Selector/Multiplexer
QUAD 2-INPUT DATA SELECTORS/MULTLPTEXERS
From old datasheet system
|
Motorola, Inc
ON Semi
|
| K6R1004V1D |
256K x 4 Bit (with /OE) High-Speed CMOS Static RAM(3.3V Operating) Row Select Data Sheet
|
Samsung Electronic
|
| NJU7385 |
Dual H-bridge Driver for actuator Input Control Mode Select Function
|
New Japan Radio
|
| 74HC257 MC74HC257 MC74HC257D MC74HC257N ON1400 HC2 |
From old datasheet system
DUAL 2-INPUT DATA SELECTOR/MULTLPLEXER WLTH 3-STATE OUTPUTS
Quad 2-Input Data Selector/Multiplexer with 3-State Outputs
|
Motorola Inc
ON Semi
Motorola, Inc
|
| DS1616S DS1616 1616 |
From old datasheet system
Temperature and Three Input MUX’ed 8-bit Data Recorder
Temperature and Three Input MUXed 8-bit Data Recorder
|
DALLAS[Dallas Semiconductor]
MAXIM - Dallas Semiconductor
|
| 74HCT157DTR2G 74HCT157DR2G 74HCT157.REV1 |
74HCT157 Data Sheet
Quad 2−Input Data Selectors / Multiplexers High−Performance Silicon−Gate CMOS
|
ON Semiconductor
|
| XR16L2551 XR16L2551IL |
LOW VOLTAGE DUART WITH POWERSAVE 2 CHANNEL(S), 3.125M bps, SERIAL COMM CONTROLLER, QCC32
Industry Smallest Package UART with 2.25V to 5.5V Operation, Intel/Motorola Data Bus Interfaces Select and Exclusive PowerSave Feature
|
Exar, Corp.
|
| SLG59H1010V |
A 13.3 mΩ, 5 A, Integrated Power Switch with 12V/24V Input Lockout Select and MOSFET Current Monitor Output
|
Dialog Semiconductor
|
| MP7643AS |
4-Channel, Programmable Gain Voltage Output, 15 MHz Input Bandwidth 8-Bit DACs with Multiplying Parallel Digital Data Port PARALLEL, 8 BITS INPUT LOADING, 0.15 us SETTLING TIME, 8-BIT DAC, PDSO28
|
Exar, Corp.
|
| 54HC151 |
8-Input Data Selector / Multiplexer
|
Motorola Semiconductor
|
| MCP6142 MCP6144 MCP6143 MCP6141 MCP6142-I/MS MCP61 |
600 nA, Non-Unity Gain Rail-to-Rail Input/Output Op Amps
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere.
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier ...
|
Microchip Technology Inc.
MICROCHIP[Microchip Technology]
|
| IN74ACT153N IN74ACT153 IN74ACT153D |
DUAL 4-INPUT DATA SELECTOR/MULTIPLEXER
|
INTEGRAL JOINT STOCK COMPANY
INTEGRAL[Integral Corp.]
|
