| PART |
Description |
Maker |
| 125-0304-0 125-0311-5 125-0309-3 125-0302-4 125-03 |
KUPPLUNG PUSH PULL UEBERWURFKAPPE 16POL
EINBAUBUCHSE PUSH PULL 16POL
KUPPLUNG PUSH PULL UEBERWURFKAPPE 12POL
EINBAUBUCHSE PUSH PULL 12POL
EINBAUSTECKER PUSH PULL 20POL
EINBAUSTECKER PUSH PULL 12POL
STECKER PUSH PULL UEBERWURFKAPPE 12POL
STECKER PUSH PULL UEBERWURFKAPPE 20POL
KUPPLUNG PUSH PULL UEBERWURFKAPPE 20POL
STECKER PUSH PULL UEBERWURFKAPPE 16POL
EINBAUSTECKER PUSH PULL 16POL
STECKER AUSSENGEWINDE 16POL
EINBAUSTECKER PUSH PULL 8POL
KUPPLUNG AUSSENGEWINDE 16POL
STECKER AUSSENGEWINDE 20POL
EINBAUBUCHSE PUSH PULL 20POL EINBAUBUCHSE推拉20POL
STECKER AUSSENGEWINDE 6POL STECKER AUSSENGEWINDE 6POL
EINBAUSTECKER PUSH PULL 6POL EINBAUSTECKER推拉6POL
EINBAUSTECKER AUSSENGEWINDE 4POL
|
Molex, Inc.
|
| 74VHCT373A 74VHCT373ASJX 74VHCT373M 74VHCT373AMTCX |
Supervisor w/5K Pull-Up Active Low, -40C to 85C, 3-TO-92, BAG
From old datasheet system
Octal D-Type Latch with 3-STATE Outputs
Supervisor w/5K Pull-Up Active Low, -40C to 85C, 8-SOIC 150mil, TUBE
8-Bit D-Type Latch
|
Fairchild Semiconductor
|
| DS3687H DS3687J-8/A DS3687N-8/B DS3687H/A DS3687N- |
Dual Peripheral Driver
µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 1.6V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 2.3V, Timeout: 20ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 2.0V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin 双外围驱动器
|
KEMET Corporation
|
| 74VHC74MTC 74VHC74N 74VHC74SJ 74VHC74 74VHC74MTCX |
Dual D-Type Flip-Flop 双D型触发器
Supervisor Push-Pull Active High, -40C to 85C, 3-SOT-23, T/R
Dual D-Type Flip-Flop with Preset and Clear
|
Fairchild Semiconductor, Corp.
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| S8740280GT |
GaAs Push Pull Hybrid
|
PDI
|
| DS1815 DS1815-5 DS1815-10 DS1815-15 DS1815R-5TR DS |
3.3V EconoReset with Push-Pull Output
|
DALLAS[Dallas Semiconductor]
MAXIM - Dallas Semiconductor
|
| L293B03 |
PUSH-PULL FOUR CHANNEL DRIVERS
|
STMicroelectronics
|
| DS1810 DS1810-10 DS1810-15 DS1810-5 DS1810R-10TR D |
5V EconoReset with Push-Pull Output
|
MAXIM - Dallas Semiconductor
Dallas Semiconducotr
DALLAS[Dallas Semiconductor]
|
| 809-198 |
Push-Pull Mighty Mouse
|
Glenair, Inc.
|
| FP204 |
Push-Pull Circuit Applications
|
SANYO[Sanyo Semicon Device]
|
|
