| |
|
 |
MAXIM - Dallas Semiconductor
|
| Part No. |
MAX1612EVKIT
|
| OCR Text |
...r supply to the VCHARGE pad and voltmeters to the FULL and VMAIN pads. 3) Turn on the power supply and momentarily press Switch SW1 to reset the internal counter. Then verify that the voltmeter attached to the FULL pad indicates a logic-low... |
| Description |
Evaluation Kit for the MAX1612/MAX1613
From old datasheet system
Evaluation Kit for the MAX1612/ MAX1613
|
| File Size |
65.90K /
4 Page |
 View
it Online |
Download Datasheet
|
| |
|
|
MAXIM - Dallas Semiconductor
|
| Part No. |
MAX1982EVKIT
|
| OCR Text |
...ble of supplying 5V at 10mA Two voltmeters
Shutdown Control
The MAX1982 has an active-low shutdown control input to enable/disable its output. The 3-pin header JU1 selects the shutdown mode. Remove the shunt when driving shutdown with a... |
| Description |
Evaluation Kit for the MAX1982/MAX1983
From old datasheet system
Evaluation Kit for the MAX1982/ MAX1983
|
| File Size |
87.93K /
4 Page |
View
it Online |
Download Datasheet |
| |
|
|
Maxim Integrated Products Inc
|
| Part No. |
MAX6350CSA
|
| OCR Text |
...ial and Process Control Digital voltmeters ATE Equipment Precision Current Sources
MAX6325CPA MAX6325CSA MAX6325EPA MAX6325ESA MAX6325MJA PART
Ordering Information
TEMP. RANGE 0C to +70C 0C to +70C -40C to +85C -40C to +85C -55C to +12... |
| Description |
From old datasheet system
|
| File Size |
758.30K /
11 Page |
View
it Online |
Download Datasheet |
| |
|
|
Maxim
|
| Part No. |
MAX1515EVKIT
|
| OCR Text |
...VDC power supply: VDD 2 digital voltmeters (DVMs) In addition, the voltage at VOUT is adjustable from 1.1V to 2.7V by setting the FBSEL0/FBSEL1 to GND, shorting REFIN to REF, opening the PC board short across R6, and installing R6 and R7. C... |
| Description |
Evaluation Kit for the MAX1515
From old datasheet system
|
| File Size |
167.26K /
6 Page |
View
it Online |
Download Datasheet |
| |
|
|
Maxim
|
| Part No. |
MAX1761EVKIT
|
| OCR Text |
...tions are completed. 1) Connect voltmeters and loads (if any) to the VOUT pads. 2) Verify that switches ON1 and ON2 (SW1) are in the on position. 3) Connect a +5V to +20V supply to the pads marked VBATT and GND.
The EV kit outputs are pr... |
| Description |
Evaluation Kit for the MAX1761
From old datasheet system
|
| File Size |
133.82K /
5 Page |
View
it Online |
Download Datasheet |
| |
|
|
Maxim
|
| Part No. |
MAX8537EVKIT
|
| OCR Text |
...2V, 10A DC power supply * Three voltmeters
D1, D2 JU1-JU4 JU5, JU6, JU7
2 4 0
Procedure
The MAX8537 EV kit is a fully assembled and tested surface-mount board. Follow the steps below to verify board operation. Do not turn on the p... |
| Description |
Evaluation Kit for the MAX7450, MAX7451
From old datasheet system
|
| File Size |
219.48K /
11 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|
