| |
|
 |
Austria Mikro Systems
AMSCO[austriamicrosystems AG]
|
| Part No. |
AS2578P AS2578 AS2578B AS2578BN AS2578BP AS2578N
|
| OCR Text |
...s automatic pause insertion and sliding cursor procedure as selectable options (AS2578) or centrex keys (AS2578B). The device can be used with or without EEPROM as appropriate. When an EEPROM is connected, all RAM content is stored in the E... |
| Description |
TELEPHONE CONTROLLER WITH 13 MEMORIES AND 2-WIRE BUS
|
| File Size |
279.26K /
22 Page |
 View
it Online |
Download Datasheet
|
| |
|
|
Linx Technologies, Inc.
|
| Part No. |
MDEV-315-HH-CP8-HS MDEV-433-HH-CP8-HS
|
| OCR Text |
...ng firmly on the label area and sliding it off. once the unit is open, remove the battery by sliding it from beneath the holder. there may be the risk of explosion if the battery is replaced by the wrong type. replace it with the same type ... |
| Description |
|
| File Size |
825.31K /
9 Page |
View
it Online |
Download Datasheet |
| |
|
|
MULTI-INNO TECHNOLOGY
|
| Part No. |
MI0220UT
|
| OCR Text |
...of touch panel view area 11 pen sliding durability test 100, 000 times minimum hitting pad: tip r0.8 mm plastic pen; load:1.47n; sliding speed: 60 mm/sec; electric load: none test area should be at 1.8 mm inside of touch panel view area ins... |
| Description |
LCD Module
|
| File Size |
549.67K /
25 Page |
View
it Online |
Download Datasheet |
| |
|
|
Tripath
|
| Part No. |
EB-TK2050-6
|
| OCR Text |
...s.
2. Mute the amplifiers by sliding SW1 to the right (toward the outputs).
3. Connect the input sources to RCA connectors J21-J26. Note that channel pairs "cross over" to the corresponding outputs - that is, Input 1 is to the left of I... |
| Description |
Evaluation Board
|
| File Size |
517.60K /
12 Page |
View
it Online |
Download Datasheet |
| |
|
|
RF Monolithics, Inc.
|
| Part No. |
DR-TRC105-450-EV DR-TRC105-450-DK DR-TRC105-372-DK
|
| OCR Text |
...n. 2. Turn on the board sets by sliding the Power switch on the interface board to the ON position. All LED's on the radio board will flash and the MODE LED will be green. 3. See Figure 6 below. On one board, briefly press and release the R... |
| Description |
|
| File Size |
11,481.87K /
27 Page |
View
it Online |
Download Datasheet |
| |
|
|
SILABS
SSOUSA[Solid State Optronic]
|
| Part No. |
SI5364-EVB
|
| OCR Text |
...ader JPI. 3. Set VSEL33 high by sliding the switch on the VSEL33 (JP3) to the side marked "1". 4. Connect the power supply ground lead and 3.3 V supply lead to the GND and VDD terminals of the board's power connector, J15.
RSTN/CAL Setti... |
| Description |
EVALUATION BOARD FOR Si5364 SONET/SDH PRECISION PORT CARD CLOCK IC
|
| File Size |
1,233.67K /
14 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|
