|
|
|
MAXIM - Dallas Semiconductor
|
Part No. |
MAX2471EVKIT MAX2470EVKIT
|
OCR Text |
...s the HP 8561E. * One RF signal generator capable of delivering 0dBm output power at 500MHz, such as the HP 8648C signal generator. * Two baluns with a 2:1 turns ratio and an operating range encompassing 10MHz to 500MHz, such as the Macom m... |
Description |
Evaluation Kits for the MAX2470/MAX2471
|
File Size |
94.69K /
4 Page |
View
it Online |
Download Datasheet |
|
|
|
Maxim
|
Part No. |
MAX2450EVKIT
|
OCR Text |
...section. * Dual-output function generator capable of generating quadrature signals * Signal generator up to 100MHz * Dual-channel oscillosco...analyzer with range 500MHz * Power supplies with 5V and +3V outputs
Test Equipment Required
_... |
Description |
Evaluation Kit for the MAX2450/MAX2451/MAX2452
|
File Size |
90.32K /
8 Page |
View
it Online |
Download Datasheet |
|
|
|
Maxim Integrated Products, Inc.
|
Part No. |
MAX23351 MAX2335EVKIT
|
OCR Text |
...ection. 5) connect an rf signal generator (with output dis- abled) to the loin connector. set the frequency to 1150mhz and the output power ...analyzer to the ifout sma connector. set the spectrum-analyzer center fre- quency to 110mhz. 8) turn... |
Description |
Evaluation Kit
|
File Size |
685.68K /
9 Page |
View
it Online |
Download Datasheet |
|
|
|
MAXIM[Maxim Integrated Products] MAXIM - Dallas Semiconductor
|
Part No. |
MAX2411AEVKIT MAX2411A_1 MAX2411A MAX2411A1
|
OCR Text |
...urn on the DC supply, LO signal generator, and RF input signal generator. 7) The downconverted output signal at 400MHz is visible on the spectrum analyzer, indicating a mixer conversion gain of typically 9.4dB after accounting for cable and... |
Description |
Evaluation Kit for the MAX2411A
|
File Size |
93.08K /
6 Page |
View
it Online |
Download Datasheet |
|
|
|
Maxim Integrated Produc... MAXIM[Maxim Integrated Products]
|
Part No. |
MAX3558_1 MAX3558 MAX3558EVKIT
|
OCR Text |
...ower supplies and the RF signal generator. Slowly increase the adjustable supply to +3V for the gain control. You should see the output signal on the spectrum analyzer. Adjust the voltage on the JPA1 pin to observe the gain-control range. W... |
Description |
Evaluation Kit
|
File Size |
467.54K /
5 Page |
View
it Online |
Download Datasheet |
|
|
|
MAXIM - Dallas Semiconductor
|
Part No. |
MAX2371EVKIT MAX2373EVKIT
|
OCR Text |
...upply. 2) Connect one RF signal generator to the LNA_IN
2
____________________________________________________________________________...analyzer to LNA_OUT. Set the spectrum analyzer to a center frequency of 150MHz (MAX2371) or 900MHz (... |
Description |
Evaluation Kits for the MAX2371/MAX2373
|
File Size |
298.81K /
7 Page |
View
it Online |
Download Datasheet |
|
|
|
MAXIM[Maxim Integrated Products]
|
Part No. |
MAX2745EVKIT MAX2745_1 MAX2745 MAX27451
|
OCR Text |
...upply. 3) Connect one RF signal generator to the RFIN SMA connector; do not turn on the generator's output. Set the output frequency to 1575...analyzer through an SMA cable. 5) Connect the EV kit to a PC through a parallel cable. 6) Run the co... |
Description |
Evaluation Kit for the MAX2745
|
File Size |
635.62K /
6 Page |
View
it Online |
Download Datasheet |
|
|
|
MAXIM[Maxim Integrated Products]
|
Part No. |
MAX2741_1 MAX2741 MAX2741EVKIT
|
OCR Text |
...ximately 31mA. 7) Enable the RF generator's output. Use the software to set the registers and send to the part. Click on the Test Mode butto...analyzer should display a tone at 3.78MHz at approximately -8dBm.
Evaluates: MAX2741
Test Equi... |
Description |
Evaluation Kit
|
File Size |
775.32K /
7 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|